MelMatchEQ.lv2

[tramp]

Hi

I got a request for a Match EQ with a Mel spectrum type band, as I've developed a Match EQ [1] already it was just a matter of setting up the Band, so I done it quickly.

Here it is:


https://github.com/brummer10/MelMatchEQ.lv2

and the older simple Match EQ

https://github.com/brummer10/GxMatchEQ.lv2

regards
hermann

[d.healey]

More frequency bands Excellent!

[turbidh20]

Brilliant! I shall play with this.

[tramp]

Don't hesitate to let me know if you find it useful when you've had the time to try it.

[carlv]

Thanks for this. Haven't tried it yet, but was wondering if there will be a vst for this as well as some of your others. I ask, because i'd like to use it with Bitwig. It doesn't do lv2s.

[tramp]

Thanks for this. Haven't tried it yet, but was wondering if there will be a vst for this as well as some of your others. I ask, because i'd like to use it with Bitwig. It doesn't do lv2s.

No. But, when you've build and install it, you could use lv2vst
https://github.com/x42/lv2vst
to wrap it as VST2 plug.
just follow the instructions from the lv2vst github page to build and install lv2vst, it's easy enough, just make and copy to.
and then run in a terminal

Code: Select all

echo "https://github.com/brummer10/MelMatchEQ#_melmatcheq_" > ~/.vst/lv2vst/.whitelist

This works for all LV2 plugs I've done, as they are all use plain X11 GUI's.

My other LV2 plugs you find as VST's already been wrapped as well with lv2vst, I guess falkTX have done it for distribution in kxstudio repository's.

[carlv]

No. But, when you've build and install it, you could use lv2vst..

Super cool. Thanks mucho !

Same for FatFrog and LittleFly ? With a proper address for those ?

update: Success !

Screenshot from 2020-11-05 19-01-15a.jpg (76.75 KiB) Viewed 2408 times

[tramp]

Super cool. Thanks mucho !

Nice

Same for FatFrog and LittleFly ? With a proper address for those ?

Yes, all of my LV2 plugs works this way as VST.
To add more plugs to the whitelist, you must use ">>" to not overwrite the old entry's.

Code: Select all

echo "https://github.com/brummer10/FatFrog#_FatFrog_" >> ~/.vst/lv2vst/.whitelist
echo "https://github.com/brummer10/LittleFly.lv2#_LittleFly_" >> ~/.vst/lv2vst/.whitelist

[carlv]

To add more plugs to the whitelist, you must use ">>" to not overwrite the old entry's.

Great and thanks. But this as far as i can get.

Screenshot from 2020-11-16 19-24-52.png (9.67 KiB) Viewed 2390 times

What am i missing to add these to the list ?... I'm so cornfused..
https://github.com/brummer10/Fluida.lv2.git
https://github.com/brummer10/XTinyTerror.lv2.git
https://github.com/brummer10/XDarkTerror.lv2.git

[tramp]

mmm, just copy and paste the commands I've given should work.
At least it is what I do and it worked.
You may open

Code: Select all

~/.vst/lv2vst/.whitelist

with a text editor and check the content, should be:

Code: Select all

https://github.com/brummer10/MelMatchEQ#_melmatcheq_
https://github.com/brummer10/FatFrog#_FatFrog_
https://github.com/brummer10/LittleFly.lv2#_LittleFly_

I don't know what this image from reaper tell me, I never used reaper.

[carlv]

I don't know what this image from reaper tell me, I never used reaper.

Bitwig.

1stly thanks again, next this no real big deal for me. i'm happy with what i have.

Now, if you happen to spot the error of my ways here, i'll be most appreciative for that.

Here's the list i ran:

Code: Select all

cp lv2vst.so ~/.vst/lv2vst/lv2vst.so
echo "https://github.com/brummer10/MelMatchEQ#_melmatcheq_" > ~/.vst/lv2vst/.whitelist
echo "https://github.com/brummer10/FatFrog#_FatFrog_" >> ~/.vst/lv2vst/.whitelist
echo "https://github.com/brummer10/LittleFly.lv2#_LittleFly_" >> ~/.vst/lv2vst/.whitelist
echo "https://github.com/brummer10/Fluida#_Fluida_" >> ~/.vst/lv2vst/.whitelist
echo "https://github.com/brummer10/XTinyTerror#_XTinyTerror_" >> ~/.vst/lv2vst/.whitelist
echo "https://github.com/brummer10/XDarkTerror#_XDarkTerror_" >> ~/.vst/lv2vst/.whitelist

Here's what was recorded as a result to the whitelist after:

Code: Select all

https://github.com/brummer10/MelMatchEQ#_melmatcheq_
https://github.com/brummer10/FatFrog#_FatFrog_
https://github.com/brummer10/LittleFly.lv2#_LittleFly_
https://github.com/brummer10/Fluida#_Fluida_
https://github.com/brummer10/XTinyTerror#_XTinyTerror_

Notice XDarkTerror doesn't show at all up in the whitelist. What i get in Bitwig after is what you see in that screenie.
MelMatchEQ under "brummer" and FatFrog and LittleFly under "brummer10". The other 3 are MIA. And they don't show up under "Guitarix Team" or under your full name either, as they do in Ardour or the Mixbuses.

So, somewhere in there my formulation is incorrect. I even tried Fluida, XTiny and XDark seperately. No luck getting them to show.

Again, all good. Thanks...
I need a nap now.

[tramp]

So, somewhere in there my formulation is incorrect. I even tried Fluida, XTiny and XDark seperately. No luck getting them to show.

Indeed, you simply give the wrong URI's.

For, example, when you want to get the URI, which you need to commit to the whitelist, for 'Fluida, run

Code: Select all

lv2ls | grep Fluida

the result will be:

Code: Select all

https://github.com/brummer10/Fluida.lv2

This is what you need to add to the whitelist. You don't need to use the command I give, you could as well just add it in your text editor.
Same for XTinyTerror

Code: Select all

lv2ls | grep XTinyTerror

result

Code: Select all

http://guitarix.sourceforge.net/plugins/XTinyTerror_#_tinyterror_

and so on.

Once you get it, it will become easy.

For the names it shows up under, srry, I often forgot which name I've used.

regards
hermann

[carlv]

Once you get it, it will become easy.

Kinda and thanks for the tip(s).

I got Tiny on board, but XDark and Fluida still refuse to play nice. That's all good. They work just fine in the other daws if i need 'em. I'll fiddle around more down the road.

Screenshot from 2020-11-17 21-18-35.png (4.19 KiB) Viewed 2340 times

...I often forgot which name I've used.

Funny guy. That's the story of my life.
l8tr

[tramp]

That's how the .whitelist should looks like:

Code: Select all

https://github.com/brummer10/MelMatchEQ#_melmatcheq_
https://github.com/brummer10/Fluida.lv2
https://github.com/brummer10/FatFrog#_FatFrog_
https://github.com/brummer10/LittleFly.lv2#_LittleFly_
http://guitarix.sourceforge.net/plugins/XTinyTerror_#_tinyterror_
http://guitarix.sourceforge.net/plugins/XDarkTerror_#_darkterror_

[Basslint]

@tramp you are an LV2-making machine! If some day you decided to write a book on it, I would buy it for sure