Re: No sound after install KXStudio 14.04 64 bit
Posted: Mon Jun 29, 2015 12:40 pm
Ok, JACK doesn't start again with Scarlett (it does wid analog laptop audio)
here are the logs:
Mon Jun 29 14:36:46 2015: Controller activated. Version 0.124.2
Mon Jun 29 14:36:46 2015: Loading settings from "/home/roi/.config/jack/conf-jack1.xml" using expat_2.1.0 ...
Mon Jun 29 14:36:46 2015: setting engine option "driver" to value "alsa"
Mon Jun 29 14:36:46 2015: driver "alsa" selected
Mon Jun 29 14:36:46 2015: setting for driver "alsa_midi" found
Mon Jun 29 14:36:46 2015: setting for driver "net" found
Mon Jun 29 14:36:46 2015: setting for driver "firewire" found
Mon Jun 29 14:36:46 2015: setting for driver "dummy" found
Mon Jun 29 14:36:46 2015: setting for driver "alsa" found
Mon Jun 29 14:36:46 2015: setting driver option "device" to value "hw:USB,0"
Mon Jun 29 14:36:46 2015: setting driver option "nperiods" to value "3"
Mon Jun 29 14:36:46 2015: setting for driver "oss" found
Mon Jun 29 14:36:46 2015: Listening for D-Bus messages
Mon Jun 29 14:36:46 2015: Starting jack server...
Mon Jun 29 14:36:46 2015: Using System timer as clock source.
Mon Jun 29 14:36:46 2015: JACK compiled with System V SHM support.
Mon Jun 29 14:36:46 2015: loading driver "alsa" ...
Mon Jun 29 14:36:46 2015: creating alsa driver ... hw:USB,0|hw:USB,0|1024|3|48000|0|0|nomon|swmeter|-|32bit
Mon Jun 29 14:36:46 2015: configuring for 48000Hz, period = 1024 frames (21.3 ms), buffer = 3 periods
Mon Jun 29 14:36:46 2015: ALSA: final selected sample format for capture: 32bit integer little-endian
Mon Jun 29 14:36:46 2015: ALSA: use 3 periods for capture
Mon Jun 29 14:36:46 2015: ERROR: ALSA: cannot set hardware parameters for capture
Mon Jun 29 14:36:46 2015: ERROR: ALSA: cannot configure capture channel
Mon Jun 29 14:36:46 2015: ERROR: cannot load driver module alsa
Mon Jun 29 14:36:46 2015: ERROR: Failed to start server
Mon Jun 29 14:36:46 2015: Starting jack server...
Mon Jun 29 14:36:46 2015: Using System timer as clock source.
Mon Jun 29 14:36:46 2015: JACK compiled with System V SHM support.
Mon Jun 29 14:36:46 2015: loading driver "alsa" ...
Mon Jun 29 14:36:46 2015: creating alsa driver ... hw:USB,0|hw:USB,0|1024|3|48000|0|0|nomon|swmeter|-|32bit
Mon Jun 29 14:36:46 2015: configuring for 48000Hz, period = 1024 frames (21.3 ms), buffer = 3 periods
Mon Jun 29 14:36:46 2015: ALSA: final selected sample format for capture: 32bit integer little-endian
Mon Jun 29 14:36:46 2015: ALSA: use 3 periods for capture
Mon Jun 29 14:36:46 2015: ERROR: ALSA: cannot set hardware parameters for capture
Mon Jun 29 14:36:46 2015: ERROR: ALSA: cannot configure capture channel
Mon Jun 29 14:36:46 2015: ERROR: cannot load driver module alsa
Mon Jun 29 14:36:46 2015: ERROR: Failed to start server
Mon Jun 29 14:36:49 2015: driver "alsa" selected
Mon Jun 29 14:36:49 2015: Saving settings to "/home/roi/.config/jack/conf-jack1.xml" ...
here are the logs:
Mon Jun 29 14:36:46 2015: Controller activated. Version 0.124.2
Mon Jun 29 14:36:46 2015: Loading settings from "/home/roi/.config/jack/conf-jack1.xml" using expat_2.1.0 ...
Mon Jun 29 14:36:46 2015: setting engine option "driver" to value "alsa"
Mon Jun 29 14:36:46 2015: driver "alsa" selected
Mon Jun 29 14:36:46 2015: setting for driver "alsa_midi" found
Mon Jun 29 14:36:46 2015: setting for driver "net" found
Mon Jun 29 14:36:46 2015: setting for driver "firewire" found
Mon Jun 29 14:36:46 2015: setting for driver "dummy" found
Mon Jun 29 14:36:46 2015: setting for driver "alsa" found
Mon Jun 29 14:36:46 2015: setting driver option "device" to value "hw:USB,0"
Mon Jun 29 14:36:46 2015: setting driver option "nperiods" to value "3"
Mon Jun 29 14:36:46 2015: setting for driver "oss" found
Mon Jun 29 14:36:46 2015: Listening for D-Bus messages
Mon Jun 29 14:36:46 2015: Starting jack server...
Mon Jun 29 14:36:46 2015: Using System timer as clock source.
Mon Jun 29 14:36:46 2015: JACK compiled with System V SHM support.
Mon Jun 29 14:36:46 2015: loading driver "alsa" ...
Mon Jun 29 14:36:46 2015: creating alsa driver ... hw:USB,0|hw:USB,0|1024|3|48000|0|0|nomon|swmeter|-|32bit
Mon Jun 29 14:36:46 2015: configuring for 48000Hz, period = 1024 frames (21.3 ms), buffer = 3 periods
Mon Jun 29 14:36:46 2015: ALSA: final selected sample format for capture: 32bit integer little-endian
Mon Jun 29 14:36:46 2015: ALSA: use 3 periods for capture
Mon Jun 29 14:36:46 2015: ERROR: ALSA: cannot set hardware parameters for capture
Mon Jun 29 14:36:46 2015: ERROR: ALSA: cannot configure capture channel
Mon Jun 29 14:36:46 2015: ERROR: cannot load driver module alsa
Mon Jun 29 14:36:46 2015: ERROR: Failed to start server
Mon Jun 29 14:36:46 2015: Starting jack server...
Mon Jun 29 14:36:46 2015: Using System timer as clock source.
Mon Jun 29 14:36:46 2015: JACK compiled with System V SHM support.
Mon Jun 29 14:36:46 2015: loading driver "alsa" ...
Mon Jun 29 14:36:46 2015: creating alsa driver ... hw:USB,0|hw:USB,0|1024|3|48000|0|0|nomon|swmeter|-|32bit
Mon Jun 29 14:36:46 2015: configuring for 48000Hz, period = 1024 frames (21.3 ms), buffer = 3 periods
Mon Jun 29 14:36:46 2015: ALSA: final selected sample format for capture: 32bit integer little-endian
Mon Jun 29 14:36:46 2015: ALSA: use 3 periods for capture
Mon Jun 29 14:36:46 2015: ERROR: ALSA: cannot set hardware parameters for capture
Mon Jun 29 14:36:46 2015: ERROR: ALSA: cannot configure capture channel
Mon Jun 29 14:36:46 2015: ERROR: cannot load driver module alsa
Mon Jun 29 14:36:46 2015: ERROR: Failed to start server
Mon Jun 29 14:36:49 2015: driver "alsa" selected
Mon Jun 29 14:36:49 2015: Saving settings to "/home/roi/.config/jack/conf-jack1.xml" ...