Kxstudio so cute but firewire 1394 trouble overtorments

[paurockster]

I have Terratec Producer Phase 24x and KxStudio last release.
My firewire plug thru pmcia card (unknown manuf.).

A few times a firewire was detected. But it works unstable - big latency and was failed in the end.
I reinstalled the system many times. And the last times 1394 interface can't be find. Help please! Tried another distros but they are worse for me.
Some even couldn't start... so my choice is kx and it final.

That was introduction. So what the deal. Any suggetions?
FFADO and all pcmcia and fireware packaches are installed. Even tried dev versions.

dmesg | grep -i fire
nothing...

ffado-dbus-server
1412622125977617: Fatal (devicemanager.cpp)[ 191] initialize: No firewire adapters (ports) found.
1412622125977738: Error (ffado-dbus-server.cpp)[ 277] main: Could not initialize device manager

cat /proc/interrupts
CPU0 CPU1
0: 7262 714151 IO-APIC-edge timer
1: 17 3716 IO-APIC-edge i8042
7: 1 0 IO-APIC-edge
8: 0 0 IO-APIC-edge rtc0
9: 842 22463 IO-APIC-fasteoi acpi
12: 4416 886623 IO-APIC-edge i8042
14: 171 3653 IO-APIC-edge pata_atiixp
15: 0 0 IO-APIC-edge pata_atiixp
16: 3 586 IO-APIC-fasteoi snd_hda_intel
17: 901 117037 IO-APIC-fasteoi radeon
19: 12818 24972 IO-APIC-fasteoi ehci_hcd:usb1, ohci_hcd:usb2, ohci_hcd:usb3
20: 0 1 IO-APIC-fasteoi yenta
21: 0 0 IO-APIC-fasteoi eth0
22: 66126 74450 IO-APIC-fasteoi sata_sil, b43
23: 0 0 IO-APIC-fasteoi mmc0, mmc1
NMI: 56 65 Non-maskable interrupts
LOC: 1015341 767425 Local timer interrupts
SPU: 0 0 Spurious interrupts
PMI: 56 65 Performance monitoring interrupts
IWI: 82425 81579 IRQ work interrupts
RTR: 0 0 APIC ICR read retries
RES: 1590522 1034226 Rescheduling interrupts
CAL: 409 6252 Function call interrupts
TLB: 11372 6337 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
MCE: 0 0 Machine check exceptions
MCP: 13 13 Machine check polls

[varpa]

Sounds like your problem may be your controller rather than ffado per se. See ffado wiki for recommendations on host controllers:
http://subversion.ffado.org/wiki. The host controller will typically appear as device /dev/fw0 and the audio interface as /dev/fw1. For expert help in debugging firewire problems send query (and subscribe to) ffado-user mailing list - see http://www.ffado.org/?q=contact

[paurockster]

Sounds like your problem may be your controller rather than ffado per se. See ffado wiki for recommendations on host controllers:
http://subversion.ffado.org/wiki. The host controller will typically appear as device /dev/fw0 and the audio interface as /dev/fw1. For expert help in debugging firewire problems send query (and subscribe to) ffado-user mailing list - see http://www.ffado.org/?q=contact

Ок, this device claimed as full supported, but this not truth. Or maybe new release kxstudio not supported. I'll wrote to ffado site. Tnx for answer!