HDMI Output Error
Posted: Tue Feb 04, 2014 1:55 am
Hi.
Some weeks ago I deleted pulseaudio from my laptop because it was creating some problems with Jack/Cadence (http://linuxmusicians.com/viewtopic.php?f=47&t=11908). But after that I haven't been able to turn the audio output to the HDMI port. Any other external audio interface works fine (my Behringer DJI and my M-Audio Fast Track Ultra). Before the update when I removed Pulseaudio, I have no problems to do this.
I already tried to turn on and off the duplex mode, but that dosen't works for me.
Here's the Cadence log:
Thanks.
Some weeks ago I deleted pulseaudio from my laptop because it was creating some problems with Jack/Cadence (http://linuxmusicians.com/viewtopic.php?f=47&t=11908). But after that I haven't been able to turn the audio output to the HDMI port. Any other external audio interface works fine (my Behringer DJI and my M-Audio Fast Track Ultra). Before the update when I removed Pulseaudio, I have no problems to do this.
I already tried to turn on and off the duplex mode, but that dosen't works for me.
Here's the Cadence log:
Code: Select all
Mon Feb 3 19:54:48 2014: ------------------
Mon Feb 3 19:54:48 2014: Controller activated. Version 1.9.10 (unknown) built on Wed Jan 22 17:21:26 2014
Mon Feb 3 19:54:48 2014: Loading settings from "/home/diego/.config/jack/conf.xml" using expat_2.0.1 ...
Mon Feb 3 19:54:48 2014: setting parameter 'engine':'driver':'(null)' to value "alsa"
Mon Feb 3 19:54:48 2014: setting parameter 'engine':'realtime':'(null)' to value "true"
Mon Feb 3 19:54:48 2014: setting parameter 'engine':'verbose':'(null)' to value "false"
Mon Feb 3 19:54:48 2014: setting parameter 'engine':'client-timeout':'(null)' to value "500"
Mon Feb 3 19:54:48 2014: setting parameter 'drivers':'dummy':'rate' to value "44100"
Mon Feb 3 19:54:48 2014: setting parameter 'drivers':'dummy':'period' to value "1024"
Mon Feb 3 19:54:48 2014: setting parameter 'drivers':'dummy':'wait' to value "21333"
Mon Feb 3 19:54:48 2014: setting parameter 'drivers':'alsa':'device' to value "hw:PCH,3"
Mon Feb 3 19:54:48 2014: setting parameter 'drivers':'alsa':'rate' to value "44100"
Mon Feb 3 19:54:48 2014: setting parameter 'drivers':'alsa':'period' to value "1024"
Mon Feb 3 19:54:48 2014: setting parameter 'drivers':'alsa':'nperiods' to value "4"
Mon Feb 3 19:54:48 2014: setting parameter 'drivers':'alsa':'hwmon' to value "false"
Mon Feb 3 19:54:48 2014: setting parameter 'drivers':'alsa':'hwmeter' to value "false"
Mon Feb 3 19:54:48 2014: setting parameter 'drivers':'alsa':'duplex' to value "false"
Mon Feb 3 19:54:48 2014: setting parameter 'drivers':'alsa':'softmode' to value "false"
Mon Feb 3 19:54:48 2014: setting parameter 'drivers':'alsa':'monitor' to value "false"
Mon Feb 3 19:54:48 2014: setting parameter 'drivers':'alsa':'dither' to value "n"
Mon Feb 3 19:54:48 2014: setting parameter 'drivers':'alsa':'shorts' to value "false"
Mon Feb 3 19:54:48 2014: Listening for D-Bus messages
Mon Feb 3 19:54:51 2014: Starting jack server...
Mon Feb 3 19:54:51 2014: JACK server starting in realtime mode with priority 10
Mon Feb 3 19:54:51 2014: Acquired audio card Audio0
Mon Feb 3 19:54:51 2014: creating alsa driver ... hw:PCH,3|hw:PCH,3|1024|4|44100|0|0|nomon|swmeter|-|32bit
Mon Feb 3 19:54:51 2014: ERROR: ALSA: Cannot open PCM device alsa_pcm for capture. Falling back to playback-only mode
Mon Feb 3 19:54:51 2014: configuring for 44100Hz, period = 1024 frames (23.2 ms), buffer = 4 periods
Mon Feb 3 19:54:51 2014: ALSA: final selected sample format for playback: 32bit integer little-endian
Mon Feb 3 19:54:51 2014: ERROR: ALSA: got smaller periods 2 than 4 for playback
Mon Feb 3 19:54:51 2014: ERROR: ALSA: cannot configure playback channel
Mon Feb 3 19:54:51 2014: ERROR: JackTemporaryException : now quits...
Mon Feb 3 19:54:51 2014: ERROR: Cannot initialize driver
Mon Feb 3 19:54:51 2014: ERROR: JackServer::Open failed with -1
Mon Feb 3 19:54:51 2014: ERROR: Failed to open server