Page 1 of 1
M-Audio Fast Track no Input signal
Posted: Fri Jan 10, 2014 11:37 am
by martl
Dear LinuxMusicians,
i have a problem with my USB Audio Interface (M-Audio Fast Track).
I'd like to play Bass over the Ampeg SVX software. In the Software i can change in the Audio Settings DirectX to ASIO. The output sound is already ok. I get the "click" on my Headphones but i get no Input signal.
Facts:
Wineasio is already installed.
Wine Version: 1.6.1
Linux: Debian Wheezy
KXstuido Repo already in use.
Jack is also installed
Re: M-Audio Fast Track no Input signal
Posted: Fri Jan 10, 2014 9:03 pm
by Pablo
Make sure that jack is up and running and the capture ports connected to wineasio, what is the terminal output of the following command?
Also, how did you setup jack? And please show the terminal output of:
because some audio cards are tricky, with tricks you need to know.
And make sure capturing levels are OK in:
(in case the fast track has software controls at all, probably not, but worth checking)
Re: M-Audio Fast Track no Input signal
Posted: Sat Jan 11, 2014 7:58 am
by martl
Jack is running and Ampeg SVX, too.
Code: Select all
jack_lsp -c
system:capture_1
AmpegSVX:in_1
system:capture_2
AmpegSVX:in_2
system:playback_1
AmpegSVX:out_1
system:playback_2
AmpegSVX:out_2
AmpegSVX:in_1
system:capture_1
AmpegSVX:in_2
system:capture_2
AmpegSVX:in_3
AmpegSVX:in_4
AmpegSVX:in_5
AmpegSVX:in_6
AmpegSVX:in_7
AmpegSVX:in_8
AmpegSVX:in_9
AmpegSVX:in_10
AmpegSVX:in_11
AmpegSVX:in_12
AmpegSVX:in_13
AmpegSVX:in_14
AmpegSVX:in_15
AmpegSVX:in_16
AmpegSVX:out_1
system:playback_1
AmpegSVX:out_2
system:playback_2
AmpegSVX:out_3
AmpegSVX:out_4
AmpegSVX:out_5
AmpegSVX:out_6
AmpegSVX:out_7
AmpegSVX:out_8
AmpegSVX:out_9
AmpegSVX:out_10
AmpegSVX:out_11
AmpegSVX:out_12
AmpegSVX:out_13
AmpegSVX:out_14
AmpegSVX:out_15
AmpegSVX:out_16
Code: Select all
arecord -l && aplay -l
**** Liste der Hardware-Geräte (CAPTURE) ****
Karte 0: Intel [HDA Intel], Gerät 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 0: Intel [HDA Intel], Gerät 2: ALC662 rev1 Analog [ALC662 rev1 Analog]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 1: Track [Fast Track], Gerät 0: USB Audio [USB Audio]
Sub-Geräte: 0/1
Sub-Gerät #0: subdevice #0
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 0: Intel [HDA Intel], Gerät 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 1: Track [Fast Track], Gerät 0: USB Audio [USB Audio]
Sub-Geräte: 0/1
Sub-Gerät #0: subdevice #0
Karte 2: NVidia [HDA NVidia], Gerät 3: HDMI 0 [HDMI 0]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 2: NVidia [HDA NVidia], Gerät 7: HDMI 0 [HDMI 0]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 2: NVidia [HDA NVidia], Gerät 8: HDMI 0 [HDMI 0]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 2: NVidia [HDA NVidia], Gerät 9: HDMI 0 [HDMI 0]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Thx, for help.
Re: M-Audio Fast Track no Input signal
Posted: Sat Jan 11, 2014 9:46 am
by Pablo
Connections seem OK but I would try connecting (virtually, in jack audio)
capture 1 (the jack, digital audio side corresponding to the first physical input in the Fast Track) TO both ampeg 1 and 2.
Also, did you check alsamixer. Your fast track is card 1, so do a:
I guess you already know the following because playback works but you have to select hw:1 in qjackctl or Cadence as the interface. Maybe it is worth to start jackd manually from the command line, just for diagnosing purposes (you can make the connections afterwards in qjackctl or Cadence-Catia):
(Note that card numbering could change between reboots so it might be a better idea use the name instead of the number. The Fast Track is called hw:Track )
Also, did you register wineasio after installing it?
Re: M-Audio Fast Track no Input signal
Posted: Sat Jan 11, 2014 12:19 pm
by martl
Hi Pablo,
The root of all evil is in the settings from jack.
It's not capture 1 to both ampegs input. Capture 2 is the holy grail
Both Inputs from the Ampeg SVX connected to capture 2 and all is fine!
Thx for help!