kxstudio and rme multiface, jack don't start

[chbu]

Hi, I have problems with RME Mutiface on kxstudio. (Ubuntu12.4)
I can start hdspcon and hdspmixer. But jack don't start.

The soundcard is working on AVlinux. But it is necessary to set the same sample rate in the hdspmixer and qjackctl for jack.

here is the output from hdsploader:
hdsploader - firmware loader for RME Hammerfall DSP cards
Looking for HDSP + Multiface or Digiface cards :
Card 0 : RME Hammerfall DSP + Multiface at 0xfdfe0000, irq 16
Upload firmware for card hw:0
Hwdep ioctl error on card hw:0 : Device or resource busy.
Card 1 : Loopback 1
Card 2 : USB Device 0x7104:0x2202 at usb-0000:00:02.0-2, full speed
Card 3 : PnP Audio Device at usb-0000:00:02.0-7, full speed
Card 4 : M-Audio MidiSport 4x4 at usb-0000:00:02.0-4, full speed


here is the massage output from qjackctl:
jack server is not running or cannot be started
Sat Oct 12 10:49:02 2013: Saving settings to "/home/chris/.config/jack/conf.xml" ...
Sat Oct 12 10:53:13 2013: Saving settings to "/home/chris/.config/jack/conf.xml" ...
Sat Oct 12 10:53:41 2013: Saving settings to "/home/chris/.config/jack/conf.xml" ...
Sat Oct 12 10:53:41 2013: Starting jack server...
Sat Oct 12 10:53:41 2013: JACK server starting in realtime mode with priority 10
Sat Oct 12 10:53:41 2013: ERROR: cannot register object path "/org/freedesktop/ReserveDevice1/Audio0": A handler is already registered for /org/freedesktop/ReserveDevice1/Audio0
Sat Oct 12 10:53:41 2013: ERROR: Failed to acquire device name : Audio0 error : A handler is already registered for /org/freedesktop/ReserveDevice1/Audio0
Sat Oct 12 10:53:41 2013: ERROR: Audio device hw:DSP cannot be acquired...
Sat Oct 12 10:53:41 2013: ERROR: Cannot initialize driver
Sat Oct 12 10:53:41 2013: ERROR: JackServer::Open failed with -1
Sat Oct 12 10:53:41 2013: ERROR: Failed to open server
Sat Oct 12 10:53:46 2013: Starting jack server...
Sat Oct 12 10:53:46 2013: JACK server starting in realtime mode with priority 10
Sat Oct 12 10:53:46 2013: ERROR: cannot register object path "/org/freedesktop/ReserveDevice1/Audio0": A handler is already registered for /org/freedesktop/ReserveDevice1/Audio0
Sat Oct 12 10:53:46 2013: ERROR: Failed to acquire device name : Audio0 error : A handler is already registered for /org/freedesktop/ReserveDevice1/Audio0
Sat Oct 12 10:53:46 2013: ERROR: Audio device hw:DSP cannot be acquired...
Sat Oct 12 10:53:46 2013: ERROR: Cannot initialize driver
Sat Oct 12 10:53:46 2013: ERROR: JackServer::Open failed with -1
Sat Oct 12 10:53:46 2013: ERROR: Failed to open server
Sat Oct 12 10:53:52 2013: ------------------
Sat Oct 12 10:53:52 2013: Controller activated. Version 1.9.10 (unknown) built on Sun Sep 8 16:53:33 2013
Sat Oct 12 10:53:52 2013: Loading settings from "/home/chris/.config/jack/conf.xml" using expat_2.0.1 ...
Sat Oct 12 10:53:52 2013: setting parameter 'engine':'driver':'(null)' to value "alsa"
Sat Oct 12 10:53:52 2013: setting parameter 'engine':'realtime':'(null)' to value "true"
Sat Oct 12 10:53:52 2013: setting parameter 'engine':'verbose':'(null)' to value "false"
Sat Oct 12 10:53:52 2013: setting parameter 'engine':'client-timeout':'(null)' to value "500"
Sat Oct 12 10:53:52 2013: setting parameter 'drivers':'alsa':'device' to value "hw:DSP,0"
Sat Oct 12 10:53:52 2013: setting parameter 'drivers':'alsa':'capture' to value "hw:DSP"
Sat Oct 12 10:53:52 2013: setting parameter 'drivers':'alsa':'playback' to value "hw:DSP"
Sat Oct 12 10:53:52 2013: setting parameter 'drivers':'alsa':'rate' to value "96000"
Sat Oct 12 10:53:52 2013: setting parameter 'drivers':'alsa':'period' to value "1024"
Sat Oct 12 10:53:52 2013: setting parameter 'drivers':'alsa':'nperiods' to value "2"
Sat Oct 12 10:53:52 2013: setting parameter 'drivers':'alsa':'hwmon' to value "false"
Sat Oct 12 10:53:52 2013: setting parameter 'drivers':'alsa':'hwmeter' to value "false"
Sat Oct 12 10:53:52 2013: setting parameter 'drivers':'alsa':'duplex' to value "false"
Sat Oct 12 10:53:52 2013: setting parameter 'drivers':'alsa':'softmode' to value "false"
Sat Oct 12 10:53:52 2013: setting parameter 'drivers':'alsa':'monitor' to value "false"
Sat Oct 12 10:53:52 2013: setting parameter 'drivers':'alsa':'dither' to value "n"
Sat Oct 12 10:53:52 2013: setting parameter 'drivers':'alsa':'inchannels' to value "10"
Sat Oct 12 10:53:52 2013: setting parameter 'drivers':'alsa':'outchannels' to value "10"
Sat Oct 12 10:53:52 2013: setting parameter 'drivers':'alsa':'shorts' to value "false"
Sat Oct 12 10:53:52 2013: setting parameter 'drivers':'alsa':'hw-alias' to value "true"
Sat Oct 12 10:53:52 2013: Listening for D-Bus messages
Sat Oct 12 10:53:54 2013: Starting jack server...
Sat Oct 12 10:53:54 2013: JACK server starting in realtime mode with priority 10
Sat Oct 12 10:53:54 2013: Acquired audio card Audio0
Sat Oct 12 10:53:54 2013: creating alsa driver ... hw:DSP|hw:DSP|1024|2|96000|10|10|nomon|swmeter|-|32bit
Sat Oct 12 10:53:54 2013: Using ALSA driver H-DSP running on card 0 - RME Hammerfall DSP + Multiface at 0xfdfe0000, irq 16
Sat Oct 12 10:53:54 2013: configuring for 96000Hz, period = 1024 frames (10.7 ms), buffer = 2 periods
Sat Oct 12 10:53:54 2013: ALSA: final selected sample format for capture: 32bit integer little-endian
Sat Oct 12 10:53:54 2013: ERROR: ALSA: cannot set channel count to 10 for capture
Sat Oct 12 10:53:54 2013: ERROR: ALSA: cannot configure capture channel
Sat Oct 12 10:53:54 2013: ERROR: Cannot initialize driver
Sat Oct 12 10:53:54 2013: ERROR: JackServer::Open failed with -1
Sat Oct 12 10:53:54 2013: ERROR: Failed to open server
Sat Oct 12 10:54:05 2013: Saving settings to "/home/chris/.config/jack/conf.xml" ...
Sat Oct 12 10:54:20 2013: Saving settings to "/home/chris/.config/jack/conf.xml" ...
Sat Oct 12 10:55:15 2013: Starting jack server...
Sat Oct 12 10:55:15 2013: JACK server starting in realtime mode with priority 10
Sat Oct 12 10:55:15 2013: ERROR: cannot register object path "/org/freedesktop/ReserveDevice1/Audio0": A handler is already registered for /org/freedesktop/ReserveDevice1/Audio0
Sat Oct 12 10:55:15 2013: ERROR: Failed to acquire device name : Audio0 error : A handler is already registered for /org/freedesktop/ReserveDevice1/Audio0
Sat Oct 12 10:55:15 2013: ERROR: Audio device hw:DSP cannot be acquired...
Sat Oct 12 10:55:15 2013: ERROR: Cannot initialize driver
Sat Oct 12 10:55:15 2013: ERROR: JackServer::Open failed with -1
Sat Oct 12 10:55:15 2013: ERROR: Failed to open server
Sat Oct 12 10:55:16 2013: Saving settings to "/home/chris/.config/jack/conf.xml" ...

thanks for help
chris

[chbu]

Yes, pulseaudio was installed. But I don't had trouble with pulseaudio on KxStudio before. Now I have uninstalled pulseaudio, but it make no different. Sound is still not working.
Before I installed the rme multiface, I had a Hoontech DSP2000 C-Port. The DSP2000 works with out problems.

[chbu]

Now it works. Thank you very much!
I try,
cadence-session-start -s

But I don't know what was using the interface.
After reboot everything seems to be ok.

thanks
chris