Steinberg UR-22
Moderators: MattKingUSA, khz
Steinberg UR-22
Hi I just purchased the Steinberg UR-22 and Qjactl won't start. Here is the output for aplay/lusb:
@audioserv:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 1: Device [PnP Audio Device], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: Loopback [Loopback], device 0: Loopback PCM [Loopback PCM]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
card 2: Loopback [Loopback], device 1: Loopback PCM [Loopback PCM]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
jethro@audioserv:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0499:1509 Yamaha Corp.
Bus 002 Device 002: ID 04f3:0103 Elan Microelectronics Corp.
Bus 002 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 002 Device 004: ID 0d8c:0201 C-Media Electronics, Inc. CM6501
@audioserv:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 1: Device [PnP Audio Device], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: Loopback [Loopback], device 0: Loopback PCM [Loopback PCM]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
card 2: Loopback [Loopback], device 1: Loopback PCM [Loopback PCM]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
jethro@audioserv:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0499:1509 Yamaha Corp.
Bus 002 Device 002: ID 04f3:0103 Elan Microelectronics Corp.
Bus 002 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 002 Device 004: ID 0d8c:0201 C-Media Electronics, Inc. CM6501
Re: Steinberg UR-22
I don't think this exists on my Tango Studio Debian Wheezy flavor:
sound/usb/quirks-table.h:
sound/usb/quirks-table.h:
Re: Steinberg UR-22
Maybe I should take this back and just keep the Scarlett 2i2? That sounds like an awful lot of work for hardly noticeable gains, am I correct?
Re: Steinberg UR-22
Yeah these 2 devices are very similiar performance hardware-wise. And on linux, they both use the same generic usb driver, so no difference in software. Why did you get the UR22 when you have a 2i2? Doesn't seem like an upgrade, unlike for example, moving to an RME Babyface.aeb105 wrote:just keep the Scarlett 2i2? hardly noticeable gains, am I correct?
Author of BackupBand at https://sourceforge.net/projects/backupband/files/
My fans show their support by mentioning my name in their signature.
Re: Steinberg UR-22
I asked the guy at Guitar Center what would be an upgrade to the Scarlett 2i2 before we reach Apogee level quality/price and he said the Steinberg UR-22 because of the sampling rate of 192 vs 96 with Scarlett and maybe something else. Its definitely a heavier box, which could mean the pre-amps are of slighly higher quality. I don't know. Does anybody on the forums use this?
Re: Steinberg UR-22
Does anybody have any input as to if this is worth the setup hassle over just using my Scarlett 2i2?
-
- Established Member
- Posts: 2348
- Joined: Mon Jul 01, 2013 8:13 am
- Has thanked: 9 times
- Been thanked: 468 times
Re: Steinberg UR-22
Couldn't say if it is worth or not.
Just when you follow the thread above, you will see that it works.
The Steinberg UR-22 run with a sampling rate of 192
For me, patch and build the kernel isn't hassle at all, as I usually build my own rt-kernel anyway. On debian based systems it is easier as you guess, you will found a couple of detailed instructions, in the net, how to do it.
If it goes wrong, no problem, you could still boot your old kernel anyway, so, no fear, there is nothing to lose.
Just when you follow the thread above, you will see that it works.
The Steinberg UR-22 run with a sampling rate of 192
For me, patch and build the kernel isn't hassle at all, as I usually build my own rt-kernel anyway. On debian based systems it is easier as you guess, you will found a couple of detailed instructions, in the net, how to do it.
If it goes wrong, no problem, you could still boot your old kernel anyway, so, no fear, there is nothing to lose.
On the road again.
- bluebell
- Established Member
- Posts: 1927
- Joined: Sat Sep 15, 2012 11:44 am
- Location: Saarland, Germany
- Has thanked: 113 times
- Been thanked: 122 times
Re: Steinberg UR-22
Increasing the sample rate beyond 44.1/48 kHz is a waste of CPU and storage. It won't bring more details, et even can intruduce noise by interferences of the wanted sound with high frequencies. Since oversampling is done in the A/D-chips there's no quality gain in using 96 or 192 kHz.
Linux – MOTU UltraLite AVB – Qtractor – http://suedwestlicht.saar.de/
Re: Steinberg UR-22
there is no need to recompile the entire kernel for the ur22 , only 3 modules for the 3.2.0.4 rt kernel in use with tango studio (in use also with wheezy rt) .
For more info (sorry, it's in french but command line is universal ) and for linuxian pressed for time , i've make a package for the last kernel of tango studio :
http://www.linuxmao.org/Steinberg+UR22
direct link for 3.2.0.4 rt package :
http://3gthsuj0vq.1fichier.com/
NB:sorry for my poor english ... and later when the wheezy's kernel will be upgraded in tango studio, this update will be normaly integrated with the kernel package in use with tango studio.
For more info (sorry, it's in french but command line is universal ) and for linuxian pressed for time , i've make a package for the last kernel of tango studio :
http://www.linuxmao.org/Steinberg+UR22
direct link for 3.2.0.4 rt package :
http://3gthsuj0vq.1fichier.com/
NB:sorry for my poor english ... and later when the wheezy's kernel will be upgraded in tango studio, this update will be normaly integrated with the kernel package in use with tango studio.