Ultralite AVB

Talk about your MIDI interfaces, microphones, keyboards...

Moderators: khz, MattKingUSA

buonamorte.records
Established Member
Posts: 69
Joined: Tue Apr 07, 2020 4:31 am
Has thanked: 8 times
Been thanked: 9 times

Re: Ultralite AVB

Post by buonamorte.records »

@AudioNarwhal today, everything was ready for a debug test and...everything seems to work perfectly. Obviously. I think it's something about Heisemberg... :shock:
EDIT: After rebooting (only my laptop, not the interface), channel hopping. Than I:

Code: Select all

sudo dmesg -w

and, restarting Mixbus, everything works fine. As if with dmesg the PC start using the patch. My log:

Code: Select all

[    0.012710] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.012711] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.012711] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.012711] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.012712] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.012712] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.012712] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.012713] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.012713] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.012713] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.012714] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[    0.012714] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[    0.012714] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[    0.012715] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[    0.012715] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
[    0.012715] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
[    0.012716] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
[    0.012716] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
[    0.012716] ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
[    0.012717] ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
[    0.012717] ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
[    0.012717] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.012752] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.012754] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.012755] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.012758] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.012758] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.012763] e820: update [mem 0x6899c000-0x68f8afff] usable ==> reserved
[    0.012771] TSC deadline timer available
[    0.012771] smpboot: Allowing 20 CPUs, 0 hotplug CPUs
[    0.012784] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.012785] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.012786] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.012787] PM: hibernation: Registered nosave memory: [mem 0x6899c000-0x68f8afff]
[    0.012788] PM: hibernation: Registered nosave memory: [mem 0x6a317000-0x6a317fff]
[    0.012789] PM: hibernation: Registered nosave memory: [mem 0x6b8f0000-0x6e9effff]
[    0.012789] PM: hibernation: Registered nosave memory: [mem 0x6e9f0000-0x6eaf8fff]
[    0.012790] PM: hibernation: Registered nosave memory: [mem 0x6eaf9000-0x6ec65fff]
[    0.012790] PM: hibernation: Registered nosave memory: [mem 0x6ec66000-0x73e61fff]
[    0.012790] PM: hibernation: Registered nosave memory: [mem 0x73e62000-0x73efefff]
[    0.012791] PM: hibernation: Registered nosave memory: [mem 0x73f00000-0x79ffffff]
[    0.012792] PM: hibernation: Registered nosave memory: [mem 0x7a000000-0x7a9fffff]
[    0.012792] PM: hibernation: Registered nosave memory: [mem 0x7aa00000-0x7abfffff]
[    0.012792] PM: hibernation: Registered nosave memory: [mem 0x7ac00000-0x7affffff]
[    0.012793] PM: hibernation: Registered nosave memory: [mem 0x7b000000-0x803fffff]
[    0.012793] PM: hibernation: Registered nosave memory: [mem 0x80400000-0xbfffffff]
[    0.012793] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xcfffffff]
[    0.012794] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xfdffffff]
[    0.012794] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.012794] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.012795] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.012795] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.012795] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.012795] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed1ffff]
[    0.012796] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
[    0.012796] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfedfffff]
[    0.012796] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.012797] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.012797] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.012798] [mem 0x80400000-0xbfffffff] available for PCI devices
[    0.012799] Booting paravirtualized kernel on bare hardware
[    0.012801] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.015535] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:20 nr_cpu_ids:20 nr_node_ids:1
[    0.016169] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u262144
[    0.016173] pcpu-alloc: s212992 r8192 d28672 u262144 alloc=1*2097152
[    0.016175] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[    0.016180] pcpu-alloc: [0] 16 17 18 19 -- -- -- -- 
[    0.016196] Fallback order for Node 0: 0 
[    0.016198] Built 1 zonelists, mobility grouping on.  Total pages: 4045085
[    0.016199] Policy zone: Normal
[    0.016200] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.0.5-zen1-custom root=UUID=74fb8a00-a48a-43d5-ac8f-459880fc0668 ro quiet splash
[    0.016227] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-6.0.5-zen1-custom", will be passed to user space.
[    0.016228] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.016228] printk: log_buf_len total cpu_extra contributions: 77824 bytes
[    0.016229] printk: log_buf_len min size: 131072 bytes
[    0.016334] printk: log_buf_len: 262144 bytes
[    0.016334] printk: early log buf free: 114496(87%)
[    0.017400] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.017885] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.017983] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.017989] software IO TLB: area num 32.
[    0.032119] Memory: 1656892K/16437820K available (12294K kernel code, 2265K rwdata, 8564K rodata, 2740K init, 5364K bss, 566472K reserved, 0K cma-reserved)
[    0.032491] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=20, Nodes=1
[    0.032506] ftrace: allocating 39140 entries in 153 pages
[    0.035934] ftrace: allocated 153 pages with 4 groups
[    0.036324] Dynamic Preempt: voluntary
[    0.036368] rcu: Preemptible hierarchical RCU implementation.
[    0.036368] rcu:     RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=20.
[    0.036369]  Trampoline variant of Tasks RCU enabled.
[    0.036369]  Rude variant of Tasks RCU enabled.
[    0.036370]  Tracing variant of Tasks RCU enabled.
[    0.036370] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.036371] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=20
[    0.038706] NR_IRQS: 524544, nr_irqs: 2216, preallocated irqs: 16
[    0.038979] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.039126] random: crng init done
[    0.039144] Console: colour dummy device 80x25
[    0.039153] printk: console [tty0] enabled
[    0.039166] ACPI: Core revision 20220331
[    0.039386] hpet: HPET dysfunctional in PC10. Force disabled.
[    0.039387] APIC: Switch to symmetric I/O mode setup
[    0.039388] DMAR: Host address width 39
[    0.039389] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.039392] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 29a00f0505e
[    0.039394] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.039397] DMAR: dmar1: reg_base_addr fed91000 ver 5:0 cap d2008c40660462 ecap f050da
[    0.039398] DMAR: RMRR base: 0x0000007c000000 end: 0x000000803fffff
[    0.039400] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.039401] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.039401] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.040955] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.040956] x2apic enabled
[    0.040986] Switched APIC routing to cluster x2apic.
[    0.045492] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26bef67878b, max_idle_ns: 440795293631 ns
[    0.045496] Calibrating delay loop (skipped), value calculated using timer frequency.. 5376.00 BogoMIPS (lpj=2688000)
[    0.045498] pid_max: default: 32768 minimum: 301
[    0.046495] LSM: Security Framework initializing
[    0.046495] landlock: Up and running.
[    0.046495] Yama: becoming mindful.
[    0.046495] AppArmor: AppArmor initialized
[    0.046495] TOMOYO Linux initialized
[    0.046495] LSM support for eBPF active
[    0.046495] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.046495] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.046495] CPU0: Thermal monitoring enabled (TM1)
[    0.046495] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    0.046495] process: using mwait in idle threads
[    0.046495] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.046495] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.046495] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.046495] Spectre V2 : Mitigation: Enhanced IBRS
[    0.046495] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.046495] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT
[    0.046495] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.046495] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.046495] Freeing SMP alternatives memory: 36K
[    0.046495] smpboot: CPU0: 12th Gen Intel(R) Core(TM) i7-12700H (family: 0x6, model: 0x9a, stepping: 0x3)
[    0.046495] cblist_init_generic: Setting adjustable number of callback queues.
[    0.046495] cblist_init_generic: Setting shift to 5 and lim to 1.
[    0.046495] cblist_init_generic: Setting shift to 5 and lim to 1.
[    0.046495] cblist_init_generic: Setting shift to 5 and lim to 1.
[    0.046495] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline,  AnyThread deprecated, Alderlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.046495] core: cpu_core PMU driver: 
[    0.046495] ... version:                5
[    0.046495] ... bit width:              48
[    0.046495] ... generic registers:      8
[    0.046495] ... value mask:             0000ffffffffffff
[    0.046495] ... max period:             00007fffffffffff
[    0.046495] ... fixed-purpose events:   4
[    0.046495] ... event mask:             0001000f000000ff
[    0.046495] Estimated ratio of average max frequency by base frequency (times 1024): 1668
[    0.046495] rcu: Hierarchical SRCU implementation.
[    0.046495] rcu:     Max phase no-delay instances is 400.
[    0.046495] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.046548] smp: Bringing up secondary CPUs ...
[    0.046587] x86: Booting SMP configuration:
[    0.046588] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11 #12
[    0.007383] core: cpu_atom PMU driver: PEBS-via-PT 
[    0.007383] ... version:                5
[    0.007383] ... bit width:              48
[    0.007383] ... generic registers:      6
[    0.007383] ... value mask:             0000ffffffffffff
[    0.007383] ... max period:             00007fffffffffff
[    0.007383] ... fixed-purpose events:   3
[    0.007383] ... event mask:             000000070000003f
[    0.089628]  #13 #14 #15 #16 #17 #18 #19
[    0.107524] smp: Brought up 1 node, 20 CPUs
[    0.107527] smpboot: Max logical packages: 1
[    0.107528] smpboot: Total of 20 processors activated (107520.00 BogoMIPS)
[    0.118508] node 0 deferred pages initialised in 10ms
[    0.119538] devtmpfs: initialized
[    0.119538] x86/mm: Memory block size: 128MB
[    0.120062] ACPI: PM: Registering ACPI NVS region [mem 0x6eaf9000-0x6ec65fff] (1495040 bytes)
[    0.120062] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.120062] futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.120062] pinctrl core: initialized pinctrl subsystem
[    0.120793] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.120994] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.121160] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.121321] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.121326] audit: initializing netlink subsys (disabled)
[    0.121330] audit: type=2000 audit(1669277334.075:1): state=initialized audit_enabled=0 res=1
[    0.121330] thermal_sys: Registered thermal governor 'fair_share'
[    0.121330] thermal_sys: Registered thermal governor 'bang_bang'
[    0.121330] thermal_sys: Registered thermal governor 'step_wise'
[    0.121330] thermal_sys: Registered thermal governor 'user_space'
[    0.121330] thermal_sys: Registered thermal governor 'power_allocator'
[    0.121330] cpuidle: using governor ladder
[    0.121330] cpuidle: using governor menu
[    0.121518] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.121520] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.121592] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[    0.121596] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820
[    0.121605] PCI: Using configuration type 1 for base access
[    0.121825] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.122515] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.122518] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.122518] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.122518] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.122518] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.122534] ACPI: Added _OSI(Module Device)
[    0.122534] ACPI: Added _OSI(Processor Device)
[    0.122535] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.122535] ACPI: Added _OSI(Processor Aggregator Device)
[    0.122536] ACPI: Added _OSI(Linux-Dell-Video)
[    0.122536] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.122537] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.195718] ACPI BIOS Error (bug): Failure creating named object [\GPLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.195724] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.195726] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.195735] ACPI BIOS Error (bug): Failure creating named object [\GUPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.195737] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.195739] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.195741] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS01], AE_NOT_FOUND (20220331/dswload2-162)
[    0.195743] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20220331/psobject-220)
[    0.195744] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010)
[    0.195746] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS02], AE_NOT_FOUND (20220331/dswload2-162)
[    0.195747] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20220331/psobject-220)
[    0.195749] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010)
[    0.195750] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS03], AE_NOT_FOUND (20220331/dswload2-162)
[    0.195752] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20220331/psobject-220)
[    0.195753] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010)
[    0.195754] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS04], AE_NOT_FOUND (20220331/dswload2-162)
[    0.195756] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20220331/psobject-220)
[    0.195758] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010)
[    0.195775] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS01._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.195778] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.195779] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.195780] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS01._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.195782] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.195784] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.195804] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS02._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.195806] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.195808] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.195809] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS02._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.195811] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.195812] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.195832] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS03._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.195834] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.195836] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.195837] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS03._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.195839] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.195840] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.195860] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS04._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.195862] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.195864] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.195865] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS04._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.195866] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.195868] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.195888] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS05._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.195890] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.195891] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.195892] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS05._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.195894] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.195896] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.195916] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS06._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.195918] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.195919] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.195920] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS06._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.195922] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.195924] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.195944] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS07._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.195946] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.195947] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.195948] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS07._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.195950] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.195952] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.195972] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS08._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.195974] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.195975] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.195976] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS08._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.195978] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.195979] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.195999] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS09._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.196002] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.196003] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.196004] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS09._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.196006] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.196007] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.196028] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS10._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.196030] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.196031] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.196032] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS10._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.196034] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.196035] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.196530] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS01._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.196533] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.196535] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.196536] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS01._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.196538] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.196540] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.196564] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS02._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.196567] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.196569] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.196570] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS02._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.196572] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.196574] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.196598] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS03._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.196600] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.196602] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.196603] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS03._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.196606] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.196607] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.196632] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS04._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.196634] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.196636] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.196637] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS04._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.196639] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.196641] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.204221] ACPI: 17 ACPI AML tables successfully acquired and loaded
[    0.216034] ACPI: Dynamic OEM Table Load:
[    0.216042] ACPI: SSDT 0xFFFF8E8241BE2400 0001AB (v02 PmRef  Cpu0Psd  00003000 INTL 20200717)
[    0.216769] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[    0.219711] ACPI: Dynamic OEM Table Load:
[    0.219716] ACPI: SSDT 0xFFFF8E8241BB7C00 000394 (v02 PmRef  Cpu0Cst  00003001 INTL 20200717)
[    0.220519] ACPI: Dynamic OEM Table Load:
[    0.220523] ACPI: SSDT 0xFFFF8E8241BBE800 000626 (v02 PmRef  Cpu0Ist  00003000 INTL 20200717)
[    0.221355] ACPI: Dynamic OEM Table Load:
[    0.221359] ACPI: SSDT 0xFFFF8E8241BBF000 000476 (v02 PmRef  Cpu0Hwp  00003000 INTL 20200717)
[    0.222306] ACPI: Dynamic OEM Table Load:
[    0.222312] ACPI: SSDT 0xFFFF8E8241BC0000 001BAF (v02 PmRef  ApIst    00003000 INTL 20200717)
[    0.223419] ACPI: Dynamic OEM Table Load:
[    0.223424] ACPI: SSDT 0xFFFF8E8241BC4000 001038 (v02 PmRef  ApHwp    00003000 INTL 20200717)
[    0.224443] ACPI: Dynamic OEM Table Load:
[    0.224448] ACPI: SSDT 0xFFFF8E8241BC6000 001349 (v02 PmRef  ApPsd    00003000 INTL 20200717)
[    0.225489] ACPI: Dynamic OEM Table Load:
[    0.225494] ACPI: SSDT 0xFFFF8E8240112000 000FBB (v02 PmRef  ApCst    00003000 INTL 20200717)
[    0.231576] ACPI: EC: EC started
[    0.231577] ACPI: EC: interrupt blocked
[    0.238300] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.238301] ACPI: \_SB_.PC00.LPCB.EC0_: Boot DSDT EC used to handle transactions
[    0.238302] ACPI: Interpreter enabled
[    0.238345] ACPI: PM: (supports S0 S4 S5)
[    0.238346] ACPI: Using IOAPIC for interrupt routing
[    0.238382] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.238383] PCI: Using E820 reservations for host bridge windows
[    0.239093] ACPI: Enabled 10 GPEs in block 00 to 7F
[    0.239751] ACPI: PM: Power Resource [PXP]
[    0.240506] ACPI: PM: Power Resource [PXP]
[    0.241401] ACPI: PM: Power Resource [PXP]
[    0.242239] ACPI: PM: Power Resource [PXP]
[    0.246705] ACPI: PM: Power Resource [PXP]
[    0.253502] ACPI: PM: Power Resource [PAUD]
[    0.254062] ACPI: PM: Power Resource [PXTC]
[    0.255401] ACPI: PM: Power Resource [WRST]
[    0.257268] ACPI: PM: Power Resource [D3C]
[    0.289167] ACPI: PM: Power Resource [PIN]
[    0.289375] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
[    0.289379] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.290281] acpi PNP0A08:00: _OSC: platform does not support [AER]
[    0.292048] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR]
[    0.292049] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.293458] PCI host bridge to bus 0000:00
[    0.293459] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.293460] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.293461] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.293461] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000effff window]
[    0.293462] pci_bus 0000:00: root bus resource [mem 0x80400000-0xbfffffff window]
[    0.293462] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[    0.293463] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.293626] pci 0000:00:00.0: [8086:4641] type 00 class 0x060000
[    0.293737] pci 0000:00:01.0: [8086:460d] type 01 class 0x060400
[    0.293798] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.293822] pci 0000:00:01.0: PTM enabled (root), 4ns granularity
[    0.294112] pci 0000:00:02.0: [8086:46a6] type 00 class 0x030000
[    0.294119] pci 0000:00:02.0: reg 0x10: [mem 0x6203000000-0x6203ffffff 64bit]
[    0.294125] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref]
[    0.294128] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
[    0.294141] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.294142] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics
[    0.294144] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.294168] pci 0000:00:02.0: reg 0x344: [mem 0x00000000-0x00ffffff 64bit]
[    0.294170] pci 0000:00:02.0: VF(n) BAR0 space: [mem 0x00000000-0x06ffffff 64bit] (contains BAR0 for 7 VFs)
[    0.294173] pci 0000:00:02.0: reg 0x34c: [mem 0x00000000-0x1fffffff 64bit pref]
[    0.294174] pci 0000:00:02.0: VF(n) BAR2 space: [mem 0x00000000-0xdfffffff 64bit pref] (contains BAR2 for 7 VFs)
[    0.294253] pci 0000:00:04.0: [8086:461d] type 00 class 0x118000
[    0.294266] pci 0000:00:04.0: reg 0x10: [mem 0x6204100000-0x620411ffff 64bit]
[    0.294460] pci 0000:00:06.0: [8086:464d] type 01 class 0x060400
[    0.294539] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.294566] pci 0000:00:06.0: PTM enabled (root), 4ns granularity
[    0.294835] pci 0000:00:06.2: [8086:463d] type 01 class 0x060400
[    0.294891] pci 0000:00:06.2: PME# supported from D0 D3hot D3cold
[    0.294911] pci 0000:00:06.2: PTM enabled (root), 4ns granularity
[    0.295187] pci 0000:00:08.0: [8086:464f] type 00 class 0x088000
[    0.295195] pci 0000:00:08.0: reg 0x10: [mem 0x620414c000-0x620414cfff 64bit]
[    0.295282] pci 0000:00:0d.0: [8086:461e] type 00 class 0x0c0330
[    0.295292] pci 0000:00:0d.0: reg 0x10: [mem 0x6204130000-0x620413ffff 64bit]
[    0.295332] pci 0000:00:0d.0: PME# supported from D3hot D3cold
[    0.296646] pci 0000:00:14.0: [8086:51ed] type 00 class 0x0c0330
[    0.296668] pci 0000:00:14.0: reg 0x10: [mem 0x6204120000-0x620412ffff 64bit]
[    0.296754] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.298011] pci 0000:00:14.2: [8086:51ef] type 00 class 0x050000
[    0.298032] pci 0000:00:14.2: reg 0x10: [mem 0x6204144000-0x6204147fff 64bit]
[    0.298045] pci 0000:00:14.2: reg 0x18: [mem 0x620414b000-0x620414bfff 64bit]
[    0.298238] pci 0000:00:15.0: [8086:51e8] type 00 class 0x0c8000
[    0.298269] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.298576] pci 0000:00:16.0: [8086:51e0] type 00 class 0x078000
[    0.298601] pci 0000:00:16.0: reg 0x10: [mem 0x6204149000-0x6204149fff 64bit]
[    0.298688] pci 0000:00:16.0: PME# supported from D3hot
[    0.299029] pci 0000:00:1c.0: [8086:51bc] type 01 class 0x060400
[    0.299127] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.299159] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
[    0.299444] pci 0000:00:1c.6: [8086:51be] type 01 class 0x060400
[    0.299542] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.299574] pci 0000:00:1c.6: PTM enabled (root), 4ns granularity
[    0.299836] pci 0000:00:1c.7: [8086:51bf] type 01 class 0x060400
[    0.299934] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.299966] pci 0000:00:1c.7: PTM enabled (root), 4ns granularity
[    0.300234] pci 0000:00:1f.0: [8086:5182] type 00 class 0x060100
[    0.300488] pci 0000:00:1f.3: [8086:51c8] type 00 class 0x040100
[    0.300532] pci 0000:00:1f.3: reg 0x10: [mem 0x6204140000-0x6204143fff 64bit]
[    0.300587] pci 0000:00:1f.3: reg 0x20: [mem 0x6204000000-0x62040fffff 64bit]
[    0.300692] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.301018] pci 0000:00:1f.4: [8086:51a3] type 00 class 0x0c0500
[    0.301041] pci 0000:00:1f.4: reg 0x10: [mem 0x6204148000-0x62041480ff 64bit]
[    0.301064] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.301210] pci 0000:00:1f.5: [8086:51a4] type 00 class 0x0c8000
[    0.301230] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    0.301359] pci 0000:01:00.0: [10de:2520] type 00 class 0x030000
[    0.301367] pci 0000:01:00.0: reg 0x10: [mem 0x81000000-0x81ffffff]
[    0.301374] pci 0000:01:00.0: reg 0x14: [mem 0x6000000000-0x61ffffffff 64bit pref]
[    0.301381] pci 0000:01:00.0: reg 0x1c: [mem 0x6200000000-0x6201ffffff 64bit pref]
[    0.301384] pci 0000:01:00.0: reg 0x24: [io  0x4000-0x407f]
[    0.301388] pci 0000:01:00.0: reg 0x30: [mem 0x82000000-0x8207ffff pref]
[    0.301434] pci 0000:01:00.0: PME# supported from D0 D3hot
[    0.301490] pci 0000:01:00.0: 126.024 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x8 link at 0000:00:01.0 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[    0.301569] pci 0000:01:00.1: [10de:228e] type 00 class 0x040300
[    0.301578] pci 0000:01:00.1: reg 0x10: [mem 0x82080000-0x82083fff]
[    0.301664] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.301666] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.301668] pci 0000:00:01.0:   bridge window [mem 0x81000000-0x820fffff]
[    0.301671] pci 0000:00:01.0:   bridge window [mem 0x6000000000-0x6201ffffff 64bit pref]
[    0.301719] pci 0000:00:06.0: PCI bridge to [bus 02]
[    0.301760] pci 0000:03:00.0: [1344:5407] type 00 class 0x010802
[    0.301771] pci 0000:03:00.0: reg 0x10: [mem 0x82400000-0x82403fff 64bit]
[    0.301796] pci 0000:03:00.0: enabling Extended Tags
[    0.301904] pci 0000:00:06.2: PCI bridge to [bus 03]
[    0.301906] pci 0000:00:06.2:   bridge window [mem 0x82400000-0x824fffff]
[    0.302523] pci 0000:04:00.0: [17a0:9750] type 00 class 0x080501
[    0.302553] pci 0000:04:00.0: reg 0x10: [mem 0x82300000-0x82300fff]
[    0.302756] pci 0000:04:00.0: supports D1 D2
[    0.302757] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.303550] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.303554] pci 0000:00:1c.0:   bridge window [mem 0x82300000-0x823fffff]
[    0.305040] pci 0000:05:00.0: [14c3:7961] type 00 class 0x028000
[    0.305790] pci 0000:05:00.0: reg 0x10: [mem 0x6202100000-0x62021fffff 64bit pref]
[    0.306235] pci 0000:05:00.0: reg 0x18: [mem 0x6202200000-0x6202203fff 64bit pref]
[    0.306643] pci 0000:05:00.0: reg 0x20: [mem 0x6202204000-0x6202204fff 64bit pref]
[    0.310336] pci 0000:05:00.0: supports D1 D2
[    0.310337] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.314247] pci 0000:00:1c.6: PCI bridge to [bus 05]
[    0.314255] pci 0000:00:1c.6:   bridge window [mem 0x6202100000-0x62022fffff 64bit pref]
[    0.314314] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
[    0.314335] pci 0000:06:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.314360] pci 0000:06:00.0: reg 0x18: [mem 0x82204000-0x82204fff 64bit]
[    0.314377] pci 0000:06:00.0: reg 0x20: [mem 0x82200000-0x82203fff 64bit]
[    0.314492] pci 0000:06:00.0: supports D1 D2
[    0.314492] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.314639] pci 0000:00:1c.7: PCI bridge to [bus 06]
[    0.314642] pci 0000:00:1c.7:   bridge window [io  0x3000-0x3fff]
[    0.314644] pci 0000:00:1c.7:   bridge window [mem 0x82200000-0x822fffff]
[    0.317764] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.317835] ACPI: PCI: Interrupt link LNKB configured for IRQ 1
[    0.317904] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.317973] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.318041] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.318110] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.318178] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.318247] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.659510] Low-power S0 idle used by default for system suspend
[    0.667355] ACPI: EC: interrupt unblocked
[    0.667355] ACPI: EC: event unblocked
[    0.667377] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.667377] ACPI: EC: GPE=0x6e
[    0.667378] ACPI: \_SB_.PC00.LPCB.EC0_: Boot DSDT EC initialization complete
[    0.667379] ACPI: \_SB_.PC00.LPCB.EC0_: EC: Used to handle transactions and events
[    0.667430] iommu: Default domain type: Translated 
[    0.667430] iommu: DMA domain TLB invalidation policy: lazy mode 
[    0.667506] EDAC MC: Ver: 3.0.0
[    0.669554] Registered efivars operations
[    0.669590] NetLabel: Initializing
[    0.669590] NetLabel:  domain hash size = 128
[    0.669591] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.669599] NetLabel:  unlabeled traffic allowed by default
[    0.669600] PCI: Using ACPI for IRQ routing
[    0.692242] PCI: pci_cache_line_size set to 64 bytes
[    0.693515] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window
[    0.695516] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.695517] e820: reserve RAM buffer [mem 0x6899c000-0x6bffffff]
[    0.695518] e820: reserve RAM buffer [mem 0x6a317000-0x6bffffff]
[    0.695518] e820: reserve RAM buffer [mem 0x6b8f0000-0x6bffffff]
[    0.695519] e820: reserve RAM buffer [mem 0x73f00000-0x73ffffff]
[    0.695520] e820: reserve RAM buffer [mem 0x47fc00000-0x47fffffff]
[    0.695547] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.695547] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.695547] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.695547] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.695547] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.695547] vgaarb: loaded
[    0.696162] clocksource: Switched to clocksource tsc-early
[    0.696162] VFS: Disk quotas dquot_6.6.0
[    0.696162] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.696162] AppArmor: AppArmor Filesystem Enabled
[    0.696162] pnp: PnP ACPI init
[    0.696162] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.696162] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.696162] system 00:01: [io  0x1854-0x1857] has been reserved
[    0.696280] pnp 00:03: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref]
[    0.696293] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
[    0.696295] system 00:03: [mem 0xfeda0000-0xfeda0fff] has been reserved
[    0.696295] system 00:03: [mem 0xfeda1000-0xfeda1fff] has been reserved
[    0.696296] system 00:03: [mem 0xfed20000-0xfed7ffff] could not be reserved
[    0.696297] system 00:03: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.696298] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
[    0.696298] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.698520] system 00:04: [io  0x2000-0x20fe] has been reserved
[    0.698913] system 00:05: [mem 0xfe03e008-0xfe03efff] has been reserved
[    0.698914] system 00:05: [mem 0xfe03f000-0xfe03ffff] has been reserved
[    0.699699] pnp: PnP ACPI: found 6 devices
[    0.704756] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.704795] NET: Registered PF_INET protocol family
[    0.704963] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.706669] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.706695] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.706777] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.706923] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.706960] TCP: Hash tables configured (established 131072 bind 65536)
[    0.707040] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.707076] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.707104] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.707144] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.707147] NET: Registered PF_XDP protocol family
[    0.707150] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2
[    0.707156] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffe8000 64bit pref] for e820 entry [mem 0x000a0000-0x000fffff]
[    0.707158] pci 0000:00:02.0: BAR 9: assigned [mem 0x4020000000-0x40ffffffff 64bit pref]
[    0.707160] clipped [mem size 0x00000000 64bit] to [mem size 0xfffffffffffe8000 64bit] for e820 entry [mem 0x000a0000-0x000fffff]
[    0.707162] pci 0000:00:02.0: BAR 7: assigned [mem 0x4010000000-0x4016ffffff 64bit]
[    0.707163] clipped [mem size 0x00000000 64bit] to [mem size 0xfffffffffffe8000 64bit] for e820 entry [mem 0x000a0000-0x000fffff]
[    0.707164] pci 0000:00:15.0: BAR 0: assigned [mem 0x4017000000-0x4017000fff 64bit]
[    0.707224] clipped [mem size 0x00020000] to [mem size 0xfffffffffffc0000] for e820 entry [mem 0x000a0000-0x000fffff]
[    0.707225] clipped [mem size 0x00008000] to [mem size 0xffffffffffff0000] for e820 entry [mem 0x000a0000-0x000fffff]
[    0.707226] pci 0000:00:1f.5: BAR 0: assigned [mem 0x80400000-0x80400fff]
[    0.707237] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.707238] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.707240] pci 0000:00:01.0:   bridge window [mem 0x81000000-0x820fffff]
[    0.707242] pci 0000:00:01.0:   bridge window [mem 0x6000000000-0x6201ffffff 64bit pref]
[    0.707245] pci 0000:00:06.0: PCI bridge to [bus 02]
[    0.707257] pci 0000:00:06.2: PCI bridge to [bus 03]
[    0.707259] pci 0000:00:06.2:   bridge window [mem 0x82400000-0x824fffff]
[    0.707262] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.707267] pci 0000:00:1c.0:   bridge window [mem 0x82300000-0x823fffff]
[    0.707273] pci 0000:00:1c.6: PCI bridge to [bus 05]
[    0.707278] pci 0000:00:1c.6:   bridge window [mem 0x6202100000-0x62022fffff 64bit pref]
[    0.707283] pci 0000:00:1c.7: PCI bridge to [bus 06]
[    0.707284] pci 0000:00:1c.7:   bridge window [io  0x3000-0x3fff]
[    0.707287] pci 0000:00:1c.7:   bridge window [mem 0x82200000-0x822fffff]
[    0.707294] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.707295] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]

  

To be continued...

Last edited by buonamorte.records on Thu Nov 24, 2022 8:38 am, edited 1 time in total.
buonamorte.records
Established Member
Posts: 69
Joined: Tue Apr 07, 2020 4:31 am
Has thanked: 8 times
Been thanked: 9 times

Re: Ultralite AVB

Post by buonamorte.records »

Code: Select all

[    0.707295] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.707296] pci_bus 0000:00: resource 7 [mem 0x000e8000-0x000effff window]
[    0.707297] pci_bus 0000:00: resource 8 [mem 0x80400000-0xbfffffff window]
[    0.707297] pci_bus 0000:00: resource 9 [mem 0x4000000000-0x7fffffffff window]
[    0.707298] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.707298] pci_bus 0000:01: resource 1 [mem 0x81000000-0x820fffff]
[    0.707299] pci_bus 0000:01: resource 2 [mem 0x6000000000-0x6201ffffff 64bit pref]
[    0.707300] pci_bus 0000:03: resource 1 [mem 0x82400000-0x824fffff]
[    0.707300] pci_bus 0000:04: resource 1 [mem 0x82300000-0x823fffff]
[    0.707301] pci_bus 0000:05: resource 2 [mem 0x6202100000-0x62022fffff 64bit pref]
[    0.707302] pci_bus 0000:06: resource 0 [io  0x3000-0x3fff]
[    0.707302] pci_bus 0000:06: resource 1 [mem 0x82200000-0x822fffff]
[    0.707683] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    0.716368] PCI: CLS 64 bytes, default 64
[    0.716419] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.716421] software IO TLB: mapped [mem 0x000000006220c000-0x000000006620c000] (64MB)
[    0.716451] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26bef67878b, max_idle_ns: 440795293631 ns
[    0.716517] Trying to unpack rootfs image as initramfs...
[    0.716522] clocksource: Switched to clocksource tsc
[    0.716533] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.716845] Initialise system trusted keyrings
[    0.716850] Key type blacklist registered
[    0.716874] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[    0.717380] zbud: loaded
[    0.717513] integrity: Platform Keyring initialized
[    0.717514] Key type asymmetric registered
[    0.717515] Asymmetric key parser 'x509' registered
[    1.846047] Freeing initrd memory: 103988K
[    1.848438] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[    1.848457] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    1.848481] io scheduler mq-deadline registered
[    1.850929] pcieport 0000:00:01.0: PME: Signaling with IRQ 122
[    1.851128] pcieport 0000:00:06.0: PME: Signaling with IRQ 123
[    1.851295] pcieport 0000:00:06.2: PME: Signaling with IRQ 124
[    1.851438] pcieport 0000:00:1c.0: PME: Signaling with IRQ 125
[    1.851604] pcieport 0000:00:1c.6: PME: Signaling with IRQ 126
[    1.851762] pcieport 0000:00:1c.7: PME: Signaling with IRQ 127
[    1.851840] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.855344] ACPI: thermal: [Firmware Bug]: Invalid critical threshold (0)
[    1.857722] thermal LNXTHERM:00: registered as thermal_zone0
[    1.857723] ACPI: thermal: Thermal Zone [TZ01] (40 C)
[    1.857927] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.858375] hpet_acpi_add: no address or irqs in _CRS
[    1.858401] Linux agpgart interface v0.103
[    1.863837] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[    1.865238] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.865240] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.866195] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.866324] mousedev: PS/2 mouse device common for all mice
[    1.866370] rtc_cmos rtc_cmos: RTC can wake from S4
[    1.867263] rtc_cmos rtc_cmos: registered as rtc0
[    1.867442] rtc_cmos rtc_cmos: setting system clock to 2022-11-24T08:08:56 UTC (1669277336)
[    1.867448] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
[    1.868364] intel_pstate: Intel P-state driver initializing
[    1.871840] intel_pstate: HWP enabled
[    1.872632] ledtrig-cpu: registered to indicate activity on CPUs
[    1.872711] efifb: probing for efifb
[    1.872719] efifb: framebuffer at 0x4000000000, using 3072k, total 3072k
[    1.872719] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    1.872720] efifb: scrolling: redraw
[    1.872720] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.872764] Console: switching to colour frame buffer device 128x48
[    1.873253] fb0: EFI VGA frame buffer device
[    1.878792] NET: Registered PF_INET6 protocol family
[    1.882168] Segment Routing with IPv6
[    1.882171] In-situ OAM (IOAM) with IPv6
[    1.882184] mip6: Mobile IPv6
[    1.882185] NET: Registered PF_PACKET protocol family
[    1.882305] mpls_gso: MPLS GSO support
[    1.884341] microcode: sig=0x906a3, pf=0x80, revision=0x41c
[    1.885164] microcode: Microcode Update Driver: v2.2.
[    1.886111] resctrl: L2 allocation detected
[    1.886114] IPI shorthand broadcast: enabled
[    1.886128] sched_clock: Marking stable (1879720319, 6383480)->(1989740357, -103636558)
[    1.886718] registered taskstats version 1
[    1.886722] Loading compiled-in X.509 certificates
[    1.899039] Loaded X.509 cert 'Build time autogenerated kernel key: 71bf0c6278317ed95cca089a209f1ea38e97907c'
[    1.900807] zswap: loaded using pool lzo/zbud
[    1.901315] Key type ._fscrypt registered
[    1.901316] Key type .fscrypt registered
[    1.901317] Key type fscrypt-provisioning registered
[    1.904213] Key type encrypted registered
[    1.904235] AppArmor: AppArmor sha1 policy hashing enabled
[    1.904621] integrity: Loading X.509 certificate: UEFI:db
[    1.904644] integrity: Loaded X.509 cert 'HP Inc.: HP UEFI Secure Boot DB 2017: d9c01b50cfcae89d3b05345c163aa76e5dd589e7'
[    1.904645] integrity: Loading X.509 certificate: UEFI:db
[    1.904662] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    1.904662] integrity: Loading X.509 certificate: UEFI:db
[    1.904677] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    1.905086] blacklist: Problem blacklisting hash (-13)
[    1.905098] blacklist: Problem blacklisting hash (-13)
[    1.905138] blacklist: Problem blacklisting hash (-13)
[    1.905167] blacklist: Problem blacklisting hash (-13)
[    1.905209] blacklist: Problem blacklisting hash (-13)
[    1.905234] blacklist: Problem blacklisting hash (-13)
[    1.905372] ima: Allocated hash algorithm: sha256
[    1.922596] ima: No architecture policies found
[    1.922628] evm: Initialising EVM extended attributes:
[    1.922629] evm: security.selinux
[    1.922631] evm: security.SMACK64 (disabled)
[    1.922632] evm: security.SMACK64EXEC (disabled)
[    1.922634] evm: security.SMACK64TRANSMUTE (disabled)
[    1.922635] evm: security.SMACK64MMAP (disabled)
[    1.922636] evm: security.apparmor
[    1.922637] evm: security.ima
[    1.922638] evm: security.capability
[    1.922640] evm: HMAC attrs: 0x1
[    1.940665] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.982152] Freeing unused decrypted memory: 2036K
[    1.982823] Freeing unused kernel image (initmem) memory: 2740K
[    1.991685] Write protecting the kernel read-only data: 24576k
[    1.992366] Freeing unused kernel image (text/rodata gap) memory: 2040K
[    1.992809] Freeing unused kernel image (rodata/data gap) memory: 1676K
[    1.997488] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.997492] Run /init as init process
[    1.997493]   with arguments:
[    1.997493]     /init
[    1.997494]     splash
[    1.997494]   with environment:
[    1.997495]     HOME=/
[    1.997496]     TERM=linux
[    1.997497]     BOOT_IMAGE=/boot/vmlinuz-6.0.5-zen1-custom
[    2.051003] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    2.051017] ACPI: button: Lid Switch [LID0]
[    2.051036] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    2.051068] ACPI: button: Power Button [PWRB]
[    2.051087] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    2.051113] ACPI: button: Power Button [PWRF]
[    2.057704] hid: raw HID events driver (C) Jiri Kosina
[    2.058111] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    2.058181] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    2.062300] cryptd: max_cpu_qlen set to 1000
[    2.077963] ACPI: battery: Slot [BAT0] (battery present)
[    2.083851] ACPI: bus type drm_connector registered
[    2.090048] sdhci: Secure Digital Host Controller Interface driver
[    2.090050] sdhci: Copyright(c) Pierre Ossman
[    2.091671] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003)
[    2.091902] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    2.091970] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    2.092475] AVX2 version of gcm_enc/dec engaged.
[    2.092648] AES CTR mode by8 optimization enabled
[    2.096810] ACPI: bus type USB registered
[    2.096836] usbcore: registered new interface driver usbfs
[    2.096844] usbcore: registered new interface driver hub
[    2.096859] usbcore: registered new device driver usb
[    2.097110] i2c i2c-0: 2/2 memory slots populated (from DMI)
[    2.097113] i2c i2c-0: Memory type 0x22 not supported yet, not instantiating SPD
[    2.098129] r8169 0000:06:00.0: enabling device (0000 -> 0003)
[    2.098236] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.099838] sdhci-pci 0000:04:00.0: SDHCI controller found [17a0:9750] (rev 1)
[    2.103307] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
[    2.106704] sdhci-pci 0000:04:00.0: enabling device (0000 -> 0002)
[    2.110492] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    2.111479] r8169 0000:06:00.0 eth0: RTL8168h/8111h, 84:69:93:56:11:7d, XID 541, IRQ 128
[    2.111481] r8169 0000:06:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    2.138867] mmc0: SDHCI controller on PCI [0000:04:00.0] using ADMA
[    2.170583] xhci_hcd 0000:00:0d.0: xHCI Host Controller
[    2.170604] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
[    2.171672] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
[    2.171815] xhci_hcd 0000:00:0d.0: xHCI Host Controller
[    2.171817] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
[    2.171819] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
[    2.171843] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00
[    2.171844] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.171845] usb usb1: Product: xHCI Host Controller
[    2.171846] usb usb1: Manufacturer: Linux 6.0.5-zen1-custom xhci-hcd
[    2.171846] usb usb1: SerialNumber: 0000:00:0d.0
[    2.171906] hub 1-0:1.0: USB hub found
[    2.171912] hub 1-0:1.0: 1 port detected
[    2.172045] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.00
[    2.172046] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.172047] usb usb2: Product: xHCI Host Controller
[    2.172048] usb usb2: Manufacturer: Linux 6.0.5-zen1-custom xhci-hcd
[    2.172048] usb usb2: SerialNumber: 0000:00:0d.0
[    2.172111] hub 2-0:1.0: USB hub found
[    2.172116] hub 2-0:1.0: 1 port detected
[    2.172376] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.172378] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    2.173470] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
[    2.173662] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.173663] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    2.173664] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    2.173679] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00
[    2.173680] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.173681] usb usb3: Product: xHCI Host Controller
[    2.173682] usb usb3: Manufacturer: Linux 6.0.5-zen1-custom xhci-hcd
[    2.173682] usb usb3: SerialNumber: 0000:00:14.0
[    2.173727] hub 3-0:1.0: USB hub found
[    2.173746] hub 3-0:1.0: 12 ports detected
[    2.174533] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.00
[    2.174534] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.174535] usb usb4: Product: xHCI Host Controller
[    2.174535] usb usb4: Manufacturer: Linux 6.0.5-zen1-custom xhci-hcd
[    2.174536] usb usb4: SerialNumber: 0000:00:14.0
[    2.174582] hub 4-0:1.0: USB hub found
[    2.174594] hub 4-0:1.0: 4 ports detected
[    2.275429] input: SYNA32CC:00 06CB:CE7D Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-SYNA32CC:00/0018:06CB:CE7D.0001/input/input4
[    2.275533] input: SYNA32CC:00 06CB:CE7D Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-SYNA32CC:00/0018:06CB:CE7D.0001/input/input5
[    2.275627] hid-generic 0018:06CB:CE7D.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA32CC:00 06CB:CE7D] on i2c-SYNA32CC:00
[    2.280251] nvme 0000:03:00.0: platform quirk: setting simple suspend
[    2.280279] nvme nvme0: pci function 0000:03:00.0
[    2.335380] nvme nvme0: 20/0/0 default/read/poll queues
[    2.339476]  nvme0n1: p1 p2 p3 p4 p5
[    2.382931] Console: switching to colour dummy device 80x25
[    2.382954] i915 0000:00:02.0: vgaarb: deactivate vga console
[    2.382990] i915 0000:00:02.0: [drm] Using Transparent Hugepages
[    2.383311] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    2.384943] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/adlp_dmc_ver2_16.bin (v2.16)
[    2.401544] i915 0000:00:02.0: [drm] GuC firmware i915/adlp_guc_70.1.1.bin version 70.1
[    2.401547] i915 0000:00:02.0: [drm] HuC firmware i915/tgl_huc_7.9.3.bin version 7.9
[    2.415347] i915 0000:00:02.0: [drm] HuC authenticated
[    2.415991] i915 0000:00:02.0: [drm] GuC submission enabled
[    2.415992] i915 0000:00:02.0: [drm] GuC SLPC enabled
[    2.416741] i915 0000:00:02.0: [drm] GuC RC: enabled
[    2.424632] usb 3-2: new full-speed USB device number 2 using xhci_hcd
[    2.553724] usb 3-2: New USB device found, idVendor=1c75, idProduct=0289, bcdDevice= 1.00
[    2.553746] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.553752] usb 3-2: Product: Arturia MiniLab mkII
[    2.553758] usb 3-2: Manufacturer: Arturia
[    2.670713] usb 3-3: new high-speed USB device number 3 using xhci_hcd
[    2.810914] usb 3-3: config 1 interface 6 altsetting 1 has a duplicate endpoint with address 0x9, skipping
[    2.810933] usb 3-3: config 1 interface 7 altsetting 1 has a duplicate endpoint with address 0x87, skipping
[    2.819916] usb 3-3: New USB device found, idVendor=07fd, idProduct=0005, bcdDevice= 2.00
[    2.819938] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.819945] usb 3-3: Product: UltraLite AVB
[    2.819951] usb 3-3: Manufacturer: MOTU
[    2.819956] usb 3-3: SerialNumber: 0001f2fffe014e16
[    2.946659] usb 3-6: new high-speed USB device number 4 using xhci_hcd
[    3.098599] usb 3-6: New USB device found, idVendor=05c8, idProduct=0b04, bcdDevice= 0.05
[    3.098621] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.098628] usb 3-6: Product: HP Wide Vision HD Camera
[    3.098634] usb 3-6: Manufacturer: Foxlink
[    3.098639] usb 3-6: SerialNumber: 01.00.00
[    3.223719] usb 3-7: new high-speed USB device number 5 using xhci_hcd
[    3.351930] usb 3-7: New USB device found, idVendor=13d3, idProduct=3567, bcdDevice= 1.00
[    3.351950] usb 3-7: New USB device strings: Mfr=5, Product=6, SerialNumber=7
[    3.351957] usb 3-7: Product: Wireless_Device
[    3.351963] usb 3-7: Manufacturer: MediaTek Inc.
[    3.351968] usb 3-7: SerialNumber: 000000000
[    3.572238] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[    3.572749] ACPI: video: [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    3.572780] ACPI: video: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    3.573376] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input7
[    3.575972] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.576510] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8
[    3.594423] fbcon: i915drmfb (fb0) is primary device
[    3.608920] Console: switching to colour frame buffer device 240x67
[    3.622341] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    3.694578] raid6: avx2x4   gen() 38229 MB/s
[    3.711578] raid6: avx2x2   gen() 44497 MB/s
[    3.728601] raid6: avx2x1   gen() 41263 MB/s
[    3.728602] raid6: using algorithm avx2x2 gen() 44497 MB/s
[    3.745557] raid6: .... xor() 29151 MB/s, rmw enabled
[    3.745558] raid6: using avx2x2 recovery algorithm
[    3.746599] xor: automatically using best checksumming function   avx       
[ 3.747365] async_tx: api initialized (async) [ 3.844801] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes [ 3.913148] PM: Image not found (code -22) [ 3.975373] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Quota mode: none. [ 4.005816] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 4.215789] ACPI: AC: AC Adapter [ADP1] (on-line) [ 4.490812] intel_pmc_core INT33A1:00: initialized [ 4.530857] input: Intel HID events as /devices/platform/INTC1070:00/input/input9 [ 4.530914] intel-hid INTC1070:00: platform supports 5 button array [ 4.530925] input: Intel HID 5 button array as /devices/platform/INTC1070:00/input/input10 [ 4.782348] proc_thermal_pci 0000:00:04.0: enabling device (0000 -> 0002) [ 4.782457] proc_thermal_pci 0000:00:04.0: error: proc_thermal_add, will continue [ 4.782480] intel_rapl_common: Found RAPL domain package [ 4.782597] Consider using thermal netlink events interface [ 4.872516] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 4.908763] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 [ 4.908840] snd_hda_intel 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver [ 4.908883] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002) [ 4.908935] snd_hda_intel 0000:01:00.1: Disabling MSI [ 4.908938] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 4.910610] iTCO_vendor_support: vendor-support=0 [ 4.912052] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400) [ 4.912105] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 4.924250] input: SYNA32CC:00 06CB:CE7D Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-SYNA32CC:00/0018:06CB:CE7D.0001/input/input11 [ 4.924320] input: SYNA32CC:00 06CB:CE7D Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-SYNA32CC:00/0018:06CB:CE7D.0001/input/input12 [ 4.924377] hid-multitouch 0018:06CB:CE7D.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA32CC:00 06CB:CE7D] on i2c-SYNA32CC:00 [ 4.961188] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.961288] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.962389] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 4.969360] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input14 [ 4.969379] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input15 [ 4.969393] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input16 [ 4.969408] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input17 [ 4.969420] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input18 [ 5.051139] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 [ 5.051244] sof-audio-pci-intel-tgl 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver [ 5.051257] sof-audio-pci-intel-tgl 0000:00:1f.3: enabling device (0000 -> 0002) [ 5.051380] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100 [ 5.051434] sof-audio-pci-intel-tgl 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 5.053666] mt7921e 0000:05:00.0: enabling device (0000 -> 0002) [ 5.058250] sof-audio-pci-intel-tgl 0000:00:1f.3: use msi interrupt mode [ 5.078553] mt7921e 0000:05:00.0: ASIC revision: 79610010 [ 5.085262] sof-audio-pci-intel-tgl 0000:00:1f.3: hda codecs found, mask 5 [ 5.085264] sof-audio-pci-intel-tgl 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now [ 5.085266] sof-audio-pci-intel-tgl 0000:00:1f.3: DMICs detected in NHLT tables: 2 [ 5.086887] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 2:2:0-57864 [ 5.086888] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:22:1 Kernel ABI 3:23:0 [ 5.086890] sof-audio-pci-intel-tgl 0000:00:1f.3: unknown sof_ext_man header type 3 size 0x30 [ 5.156566] mt7921e 0000:05:00.0: HW/SW Version: 0x8a108a10, Build Time: 20220908210919a [ 5.161255] wl: loading out-of-tree module taints kernel. [ 5.161257] wl: module license 'MIXED/Proprietary' taints kernel. [ 5.161257] Disabling lock debugging due to kernel taint [ 5.163330] wl: module verification failed: signature and/or required key missing - tainting kernel [ 5.167313] mt7921e 0000:05:00.0: WM Firmware Version: ____010000, Build Time: 20220908211021 [ 5.183055] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 2:2:0-57864 [ 5.183058] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:22:1 Kernel ABI 3:23:0 [ 5.246478] typec port0: bound usb3-port4 (ops connector_ops [usbcore]) [ 5.246500] typec port0: bound usb4-port4 (ops connector_ops [usbcore]) [ 5.908840] mc: Linux media interface: v0.10 [ 5.916139] usb 3-3: samplerate = 88200, queue_length = 21, midi = 1, vendor = 1 [ 5.916143] usb 3-3: probing interface 1 [ 5.916156] usb 3-3: probing interface 2 [ 5.916163] usb 3-3: probing interface 5 [ 5.916168] usb 3-3: probing interface 4 [ 5.916174] usb 3-3: probing interface 6 [ 5.916179] usb 3-3: probing interface 7 [ 5.916184] usb 3-3: probing interface 3 [ 5.916189] usb 3-3: probing interfaces sucessful [ 5.916190] usb 3-3: invalid capture endpoint [ 5.916242] usbcore: registered new interface driver motu [ 6.066867] videodev: Linux video capture interface: v2.00 [ 6.070419] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 6.156806] Bluetooth: Core ver 2.22 [ 6.156848] NET: Registered PF_BLUETOOTH protocol family [ 6.156849] Bluetooth: HCI device and connection manager initialized [ 6.156855] Bluetooth: HCI socket layer initialized [ 6.156858] Bluetooth: L2CAP socket layer initialized [ 6.156861] Bluetooth: SCO socket layer initialized [ 6.171330] usb 3-6: Found UVC 1.50 device HP Wide Vision HD Camera (05c8:0b04) [ 6.180257] usbcore: registered new interface driver btusb [ 6.202613] input: HP Wide Vision HD Camera: HP Wi as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/input/input19 [ 6.202653] usbcore: registered new interface driver uvcvideo [ 6.238209] pstore: Using crash dump compression: deflate [ 6.242157] input: HP WMI hotkeys as /devices/virtual/input/input20 [ 6.250627] pstore: Registered efi as persistent store backend [ 6.312869] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 6.312872] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 6.312872] RAPL PMU: hw unit of domain package 2^-14 Joules [ 6.312873] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 6.312873] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 6.316968] Bluetooth: hci0: Device setup in 133426 usecs [ 6.316974] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [ 6.870120] intel_rapl_msr: PL4 support detected. [ 6.870141] intel_rapl_common: Found RAPL domain package [ 6.870142] intel_rapl_common: Found RAPL domain core [ 6.870143] intel_rapl_common: Found RAPL domain uncore [ 6.870144] intel_rapl_common: Found RAPL domain psys [ 6.887609] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [ 6.902702] sof-audio-pci-intel-tgl 0000:00:1f.3: Topology: ABI 3:22:1 Kernel ABI 3:23:0 [ 6.902852] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Parent card not yet available, widget card binding deferred [ 6.922794] snd_hda_codec_realtek ehdaudio0D0: autoconfig for ALC245: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 6.922797] snd_hda_codec_realtek ehdaudio0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 6.922798] snd_hda_codec_realtek ehdaudio0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 6.922799] snd_hda_codec_realtek ehdaudio0D0: mono: mono_out=0x0 [ 6.922800] snd_hda_codec_realtek ehdaudio0D0: inputs: [ 6.922800] snd_hda_codec_realtek ehdaudio0D0: Mic=0x19 [ 6.962392] snd_hda_codec_realtek ehdaudio0D0: ASoC: sink widget AIF1TX overwritten [ 6.962409] snd_hda_codec_realtek ehdaudio0D0: ASoC: source widget AIF1RX overwritten [ 6.962691] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi3 overwritten [ 6.962702] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi2 overwritten [ 6.962710] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi1 overwritten [ 6.962718] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Codec Output Pin1 overwritten [ 6.962725] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Codec Input Pin1 overwritten [ 6.962736] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Analog Codec Playback overwritten [ 6.962748] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Digital Codec Playback overwritten [ 6.962759] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Alt Analog Codec Playback overwritten [ 6.962773] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Analog Codec Capture overwritten [ 6.962783] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Digital Codec Capture overwritten [ 6.962794] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Alt Analog Codec Capture overwritten [ 6.962817] skl_hda_dsp_generic skl_hda_dsp_generic: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 3 [ 6.982897] input: sof-hda-dsp Mic as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card3/input21 [ 6.983040] input: sof-hda-dsp Headphone as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card3/input22 [ 6.983170] input: sof-hda-dsp HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card3/input23 [ 6.983267] input: sof-hda-dsp HDMI/DP,pcm=4 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card3/input24 [ 6.983425] input: sof-hda-dsp HDMI/DP,pcm=5 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card3/input25 [ 10.806546] usb 3-3: clock source 1 is not valid, cannot use [ 16.510717] usb 3-3: clock source 1 is not valid, cannot use [ 17.336792] usbcore: registered new interface driver snd-usb-audio [ 18.531548] Adding 15614968k swap on /dev/nvme0n1p4. Priority:-2 extents:1 across:15614968k SSFS [ 18.546050] EXT4-fs (nvme0n1p2): re-mounted. Quota mode: none. [ 18.727611] lp: driver loaded but no devices found [ 18.730974] ppdev: user-space parallel port driver [ 18.739723] loop: module loaded [ 18.866875] EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Quota mode: none. [ 18.868802] EXT4-fs (nvme0n1p5): mounted filesystem with ordered data mode. Quota mode: none. [ 18.879046] FAT-fs (nvme0n1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 19.103323] networking done [ 19.203220] RPC: Registered named UNIX socket transport module. [ 19.203222] RPC: Registered udp transport module. [ 19.203222] RPC: Registered tcp transport module. [ 19.203222] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 19.210272] FS-Cache: Loaded [ 19.356775] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input26 [ 20.530894] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.530897] Bluetooth: BNEP filters: protocol multicast [ 20.530899] Bluetooth: BNEP socket layer initialized [ 20.531734] Bluetooth: MGMT ver 1.22 [ 20.534232] NET: Registered PF_ALG protocol family [ 20.576568] Generic FE-GE Realtek PHY r8169-0-600:00: attached PHY driver (mii_bus:phy_addr=r8169-0-600:00, irq=MAC) [ 20.717686] r8169 0000:06:00.0 eth0: Link is Down [ 20.784476] Bluetooth: hci0: Device setup in 138860 usecs [ 20.784483] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [ 20.864034] Bluetooth: hci0: Bad flag given (0x1) vs supported (0x0) [ 22.276603] r8169 0000:06:00.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 22.276614] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 28.071095] Bluetooth: RFCOMM TTY layer initialized [ 28.071105] Bluetooth: RFCOMM socket layer initialized [ 28.071109] Bluetooth: RFCOMM ver 1.11 [ 28.142428] usb 3-3: clock source 1 is not valid, cannot use [ 28.962984] usb 3-3: clock source 1 is not valid, cannot use [ 28.975338] usb 3-3: clock source 1 is not valid, cannot use [ 28.990998] usb 3-3: clock source 1 is not valid, cannot use [ 29.002701] usb 3-3: clock source 1 is not valid, cannot use [ 29.014798] usb 3-3: clock source 1 is not valid, cannot use [ 29.026806] usb 3-3: clock source 1 is not valid, cannot use [ 29.038607] usb 3-3: clock source 1 is not valid, cannot use [ 29.053768] usb 3-3: clock source 1 is not valid, cannot use [ 29.065882] usb 3-3: clock source 1 is not valid, cannot use [ 29.077818] usb 3-3: clock source 1 is not valid, cannot use [ 29.089754] usb 3-3: clock source 1 is not valid, cannot use [ 29.101827] usb 3-3: clock source 1 is not valid, cannot use [ 29.116995] usb 3-3: clock source 1 is not valid, cannot use [ 29.128803] usb 3-3: clock source 1 is not valid, cannot use [ 29.140629] usb 3-3: clock source 1 is not valid, cannot use [ 29.152555] usb 3-3: clock source 1 is not valid, cannot use [ 29.167904] usb 3-3: clock source 1 is not valid, cannot use [ 29.180330] usb 3-3: clock source 1 is not valid, cannot use [ 29.192243] usb 3-3: clock source 1 is not valid, cannot use [ 29.203891] usb 3-3: clock source 1 is not valid, cannot use [ 29.218348] usb 3-3: clock source 1 is not valid, cannot use [ 29.236719] usb 3-3: clock source 1 is not valid, cannot use [ 29.250880] usb 3-3: clock source 1 is not valid, cannot use [ 29.265365] usb 3-3: clock source 1 is not valid, cannot use [ 29.279741] usb 3-3: clock source 1 is not valid, cannot use [ 29.296362] usb 3-3: clock source 1 is not valid, cannot use [ 29.309178] MOTU Patch [ 29.318655] usb 3-3: clock source 1 is not valid, cannot use [ 29.331026] MOTU Patch [ 33.565773] Bluetooth: hci0: ACL packet for unknown connection handle 512 [ 34.099669] input: ERGO M575 Mouse as /devices/virtual/misc/uhid/0005:046D:B027.0002/input/input27 [ 34.101133] hid-generic 0005:046D:B027.0002: input,hidraw1: BLUETOOTH HID v0.09 Mouse [ERGO M575] on 14:13:33:c7:3c:e4 [ 65.811792] Bluetooth: hci0: ACL packet for unknown connection handle 512 [ 66.328489] input: ERGO M575 Mouse as /devices/virtual/misc/uhid/0005:046D:B027.0003/input/input29 [ 66.328920] hid-generic 0005:046D:B027.0003: input,hidraw1: BLUETOOTH HID v0.09 Mouse [ERGO M575] on 14:13:33:c7:3c:e4 [ 110.405831] fuse: init (API version 7.36) [ 149.108580] wlan0: authenticate with 90:9a:4a:3a:10:1d [ 149.123935] wlan0: Invalid HE elem, Disable HE [ 149.157569] wlan0: send auth to 90:9a:4a:3a:10:1d (try 1/3) [ 149.168895] wlan0: authenticated [ 149.176954] wlan0: associate with 90:9a:4a:3a:10:1d (try 1/3) [ 149.227907] wlan0: RX AssocResp from 90:9a:4a:3a:10:1d (capab=0x1811 status=0 aid=2) [ 149.408723] wlan0: associated [ 150.431208] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 366.577984] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 366.578009] device-mapper: uevent: version 1.0.3 [ 366.578049] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 367.841890] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled [ 367.847158] JFS: nTxBlock = 8192, nTxLock = 65536 [ 367.863295] QNX4 filesystem 0.2.3 registered. [ 474.480219] MOTU Patch [ 475.756699] process 'opt/Mixbus32C-8.1.378/bin/xjremote' started with executable stack [ 544.550278] MOTU Patch [ 673.580369] MOTU Patch

I've opened a recording project, put an ava legacyq on the kick and the sound start crackling. Than dmesg. Than...it works...

Last edited by buonamorte.records on Thu Nov 24, 2022 12:18 pm, edited 1 time in total.
baptiste
Established Member
Posts: 19
Joined: Sat Oct 06, 2018 7:18 am
Has thanked: 5 times
Been thanked: 6 times

Re: Ultralite AVB

Post by baptiste »

AudioNarwhal wrote: Wed Nov 23, 2022 3:26 pm

@baptiste How frequently does the babble error occur?

When decimating-shifting begins, every 2 to 3 mintutes

AudioNarwhal wrote: Wed Nov 23, 2022 3:26 pm

Did it occur randomly in the middle of the stream or was it immediately following a stream stop/start?

Audio was already playing.

AudioNarwhal wrote: Wed Nov 23, 2022 3:26 pm

I'm running youtube at 44.1k, but haven't seen anything yet. Although, surprisingly, this computer was actually quite stable even without the patch :roll: so I'm not sure this is the best test system. I'll keep it running to see if anything turns up.

It took more than 48h to appear :D

AudioNarwhal wrote: Wed Nov 23, 2022 3:26 pm

If you are able, some other good data points would be the behavior under the following conditions:

  • Different USB cable (preferably try a couple USB-IF certified cables)

  • Different USB port

  • With a USB hub between the computer and UL

  • Without a USB hub between the computer and UL

  • Being the only USB device (other than keyboard/mouse) connected to the computer

I don't have a hub, but i can try different usb ports. I'll try other cables. I usually only have the UL and a radio receiver for my mouse plugged in.

shellwalker
Established Member
Posts: 57
Joined: Sun Jan 03, 2021 1:54 pm
Has thanked: 17 times
Been thanked: 7 times

Re: Ultralite AVB

Post by shellwalker »

AudioNarwhal wrote: Tue Nov 22, 2022 10:05 pm

A few caveats... The current state of the patch appears to introduce 12ms of latency on output, and it doesn't seem to be completely reliable for those who have tested so far. That said, more testing is definitely welcomed and it will help to understand the complete scope of the problems.

In addition to applying this patch, you'll also need to remove the Drumfix patch.

As you are testing it will be helpful if you can enable the dynamic logs (instructions in an earlier post) and provide copies of those logs with the feedback.

Just a heads-up from my end:
I've successfully patched against an Ubuntu 5.15.0-53-generic kernel. No low-latency or similar stuff. MOTU Firmware is 1.4.0+90954 on my 828es.

I then did some manual testing with Ardour, using Alsa directly.
Though my 828es was more stable than before, it did not last long and I soon got distortions, but no channel-hopping.
Currently I don't have the time to do more testing at my end :( .
But I'm wondering: does anyone have an idea how we organize this whole patching & debugging information and the test-results in a better way? I'm afraid we'll soon lose overview... :roll:
Suggestions are welcome!

MOTU 828mk3, MOTU 828ES, Cakewalk by Bandlab, Kubuntu 20.04
nandoll
Established Member
Posts: 13
Joined: Mon Jul 29, 2019 10:29 pm

Re: Ultralite AVB

Post by nandoll »

@AudioNarwhal: returning to this thread after quite a while, so insanely GOOD to have you here! I'll jump in, first with my current status (sorry for the long post), then some questions in a subsequent post...

=== Current status:

== @ home:
motu: 8M + 16A combo (AVB connected), currently running firmware 1.3.5+1434 on both (very briefly tried 1.4*, quickly went back as it seemed to have more problems but did not test for long). Each one is connected (USB2) to a computer running Linux.
distro: Fedora 36
kernel: currently 5.19.12 running PREEMPT=full - Fedora kernel built from .src.rpm with added patch so that it does not complain about duplicated endpoints
driver: drumfix usb avb driver (current git), loaded as a dkms module with samplerate=48000, midi=0, vendor=1

Results:
Running at @48KHz with a 256 sample buffer, jackd v2, 64 I/O channels over USB2 in so called "vendor mode" (using the motu endpoints, not the class compliant ones). The main software (four threads of SuperCollider supernova server audio processing) is running in four "isolated" cores of the eight available (small fanless Ryzen 8 core/16 thread computer based on an Asus PN51 nuc), other jack software in other threads (speaker processor, ambisonics decoder, etc).

After a reboot, or when coming back from sleep, I run the magic curl code that turns the Motu audio interface into vendor=1 mode (from the class compliant mode it switches to when the Linux driver connects).

Once I get the jackd server started it runs fine. Initial startup is tricky. The input channels usually start with an 8xn offset from where they should be, I think output channels are normally fine (I check inputs only initially). Restarting jackd several times eventually gets them right, and after that I do not see channel hopping (at least it has never happened while I have been performing with the system). Very very occasionally I have seen weird distortion (high pitched periodic noise) which is one of the failure modes I have seen. Again, never seen that while performing (lucky, I guess). I perform at home (through the internet), or take the whole system to a venue where I interface using AVB to the speaker array.

== @ ccrma (Stanford University)

This is complicated. I designed/maintain two big systems that use Motu hardware

== Stage: this is in our small concert hall and drives a quite complex 56.8 speaker array (in a full dome over the audience area). We have 9 Motu audio interfaces running the show and a computer that boots into the working system. The selection of Motu relied on being able to run 64 channels over USB using the class compliant driver in Linux, which appeared at some point with a firmware upgrade (tested and worked fine). I came to regret this as that option was taken away in a subsequent firmware upgrade.

The two audio interfaces that connect to Linux computers (main control computer and regular desktop workstation for user interaction) are running very ancient firmware (1.2.8, I would have to check, usually 16A hardware), class compliant drivers, and run at 48KHz/44.1KHz, 64 channels, 256 or 128 sample buffers. The other audio interfaces, including the ones where users can connect to the system through USB are mostly upgraded to the latest firmware (usually Mac laptops). Performance is "adequate". Sometimes the whole system can get into a bad state (symptom: periodic high frequency buzzing in some of the outputs, loud clicks sometimes), and the only way out is a reboot of the Motu hardware - sometimes a couple of interfaces is enough if it is localized, most times all Motu hardware, including the AVB switches, needs to be restarted. Depending on the problems sometimes a reboot of the control computer is enough.

== Listening Room: a specialized full 3d (speakers below a grid floor) 22.8 system in a medium sized studio. Migrated from an RME system to make it easier to connect user's computers (only USB needed with the proper Motu drivers, same as in the Stage above). Same characteristics as the Stage system, only four Motu audio interfaces. Same issues.

Plus:
== GRAIL: this is a "portable" speaker array we take to other venues to play concerts. Depending on the particular concert we can deploy up to 32 speakers with 8 subs. We use a mix of Motu audio interfaces, number depends on requirements (at least 6 in most cases). Startup of the system is "manual" and we still rely, as in the other systems, on Motu hardware that can run firmware 1.2.8 for the interfaces that connect to Linux computers (16A hardware)...

Long term very problematic, as new Motu hardware cannot be downgraded to 1.2.8...

So....
I have been using my home system as the "testing ground" for a solution that does not rely on the class compliant driver AND can run 64 channels over USB. Drumfix's solution comes quite close and I am using it all the time, but it is not something that I could migrate to at ccrma due to the startup problems I encounter. I guess I could find a way to script the startup process (ie: start, test loopback, retry if channels are wrong) but it would be a hack...

One more datapoint:
I encountered this in our Listening Room system. A user with a Mac laptop, updated Motu drivers, and bad problems with channel hopping and noises of all kinds. I had never witnessed this with someone running OSX. Other users (different computers) did not report problems. The exact same hardware had been running for a long time. Replacing the USB cables fixed it! So, this points, as outlined before in the thread, to problems in Motu's firmware where it cannot recover from USB error conditions on its own (ie: problems are not only experienced in Linux).

nandoll
Established Member
Posts: 13
Joined: Mon Jul 29, 2019 10:29 pm

Re: Ultralite AVB

Post by nandoll »

nandoll wrote: Thu Nov 24, 2022 11:50 pm

@AudioNarwhal: returning to this thread after quite a while, so insanely GOOD to have you here! I'll jump in, first with my current status (sorry for the long post), then some questions in a subsequent post...

=== Current status:

Adding one more data point to the current status:

Just yesterday (before re-reading this thread!) I did some tests with a Motu Ultralite AVB (the original? Does not say mk anything). I connected it to the same system that is normally connected to the 8M (as in the previous post). This is again using Drumfix's driver ("motu"):

vendor=1 midi=1 samplerate=48000:
(64 channels) I managed to get output going fine, input was again offset modulo 8 but I was not able to restart jackd and get inputs to align correctly. I eventually gave up (this was a test to see if I could use this hardware for a more "mobile" version of my performance setup). The channel numbering was wrong but I did not notice channel hopping (I left it running for a couple of hours and when I checked it was fine - of course it could have hopped away and back again :-)

vendor=0 midi=1 samplerate=48000:
Restricted to 24 channels by the Motu firmware, this seemed to work fine, both input and output were correctly aligned and I did not get any channel hopping, but my test was not that long in this mode.

nandoll
Established Member
Posts: 13
Joined: Mon Jul 29, 2019 10:29 pm

Re: Ultralite AVB

Post by nandoll »

nandoll wrote: Thu Nov 24, 2022 11:50 pm

@AudioNarwhal: ... then some questions in a subsequent post...

After re-reading the last few pages of this (fantastic!) thread, I see a couple of issues being addressed:

a) channel hopping and other glitchy behavior in class compliant mode:
there is a potential improvement when running a kernel with the snd-usb-audio-printk-6.0.3.patch, this would just use the snd-usb-audio driver
(latest version here: https://drive.google.com/file/d/1-00_qF ... v-rNr/view). This would also limit the channel count to what the current max is for the Motu firmware (24 channels), and potentially introduce a 12mS output latency penalty - to perhaps be solved in the future.

b) better recovery from usb error conditions inside the Motu audio interface:
there may be test firmware images we could use, I would be happy to test those, time permitting (I can test on a Motu 8M or a 16A easily, while I could test on an UltraLite AVB this is not what I currently use).

I could test a) and b), but this would not be really useful to me in "production" as...
Not addressed (yet? - cross fingers on this!) on this thread:

c) being able to use Motu hardware under Linux with full 64 channel I/O using USB @ 44.1 or 48KHz sampling rate. I can currently do this with quite a bit of success using Drumfix's "motu" driver (with "vendor=1" and the curl incantation). I can also do this currently with old 1.2.8 versions of the firmware on old hardware, in class compliant mode.

Is my assessment correct?

nandoll
Established Member
Posts: 13
Joined: Mon Jul 29, 2019 10:29 pm

Re: Ultralite AVB

Post by nandoll »

nandoll wrote: Fri Nov 25, 2022 1:31 am
nandoll wrote: Thu Nov 24, 2022 11:50 pm

@AudioNarwhal: ... then some questions in a subsequent post...

Not addressed (yet? - cross fingers on this!) on this thread:

c) being able to use Motu hardware under Linux with full 64 channel I/O using USB @ 44.1 or 48KHz sampling rate. ...

If a) and b) solve (or ameliorate) the problems we see in class compliant mode, I imagine it would be possible to add the proper quirks to the kernel driver to point to the alternate endpoints that allow 64 channel transfers - module the patch in the kernel so that it does not complain about duplicated endpoints (I was doing that before using the full "motu" driver by Drumfix)...

jkohls
Established Member
Posts: 3
Joined: Sat Jan 26, 2019 12:58 am
Been thanked: 1 time

Re: Ultralite AVB

Post by jkohls »

shellwalker wrote: Thu Nov 24, 2022 8:13 pm

But I'm wondering: does anyone have an idea how we organize this whole patching & debugging information and the test-results in a better way? I'm afraid we'll soon lose overview... :roll:
Suggestions are welcome!

I was thinking exactly the same thing. I ended up going out of town for Thanksgiving but now I'm back and still have time and motivation to contribute to this. My suggestion is we use any existing issue management system @AudioNarwhal is already using (if available to us) or whatever the Narwhal prefers.

Here's my suggestion.

I'd create a dedicated repository for testing, tracking issues, and collecting test results. It could potentially contain the patch but I'd not check it in unless given the okay to do so. The readme would contain instructions that pull together from the various comments here on how to compile, install, and enable the required logging. There should be a script to harvest environment info (software versions, hardware IDs, etc), dump logs, etc. Automated and manual tests would be contained so we have a head start on documenting steps to reproduce issues.

It seems like there's at least three of us up and running with this patch and logging so I'm guessing it won't be long before we've all got some amount of feedback and ideas. A dedicated space for those discussions will do a lot to prevent this thread from getting out of control. I can think of a few places where something like this could live (Drumfix repo or Shellwalker wiki) but I can see an advantage to a dedicated repo as well.

Unless someone else has already started or people are fine with what we have already I volunteer to pull something together.

shellwalker
Established Member
Posts: 57
Joined: Sun Jan 03, 2021 1:54 pm
Has thanked: 17 times
Been thanked: 7 times

Re: Ultralite AVB

Post by shellwalker »

jkohls wrote: Fri Nov 25, 2022 10:13 pm

....

It seems like there's at least three of us up and running with this patch and logging so I'm guessing it won't be long before we've all got some amount of feedback and ideas. A dedicated space for those discussions will do a lot to prevent this thread from getting out of control. I can think of a few places where something like this could live (Drumfix repo or Shellwalker wiki) but I can see an advantage to a dedicated repo as well.

Unless someone else has already started or people are fine with what we have already I volunteer to pull something together.

Great!! I was thinking along the same line. Maybe just rigging a Github repo would be sufficient, assuming we can use Githubs issue management system. My own repo is just a fork of Drumfix one, so probably not the right place.
Also I'm not sure whether everyone involved here also has a Github account in order to contribute on Guthub platform. Needs to be checked.

AudioNarwhal needs to state whether it's ok to stage the patch there and should state the license (which I am assuming to be GPL in order to be compliant with the kernel...).

MOTU 828mk3, MOTU 828ES, Cakewalk by Bandlab, Kubuntu 20.04
AudioNarwhal
Established Member
Posts: 18
Joined: Thu Apr 29, 2021 12:43 pm
Been thanked: 12 times

Re: Ultralite AVB

Post by AudioNarwhal »

@buonamorte.records Thank you for the logs. Unfortunately, the dynamic-debug information seems to be missing from them. (The dynamic debug control file has to get re-written on each boot-up.) Could you share your lspci too?

@baptiste I was able to reproduce a babble here, although it was related to a sampling rate change. Basically, if I use the front panel to set the UltraLite to a higher sampling rate than ALSA thinks is set while audio is streaming, I see babble errors. I had this happen to me once when ALSA had driven the change, but I wasn't able to reproduce it. I need to dig more into this aspect of the issue.

@shellwalker @nandoll @jkohls and anyone I missed, interesting discussions here! I don't have time to address everything right now as I have been concentrating on making a firmware build, but I will write back soon.

I wanted to share this UltraLite firmware (1.4.3+92494) to see if it makes any difference for the better. This firmware attempts to put a watchdog on the USB read-write delta for playback only. For now, this will only have an impact on the playback direction and on normal class compliant operation (24 channels). There is a potential issue when the stream stops, where the watchdog thinks the stopping stream is an error condition, and may fail to mute the USB channels properly, I haven't seen it cause any major issues yet in my testing, but just something to look out for. This isn't fully tested, so please treat it as a beta build. Let me know how it goes. (If this seems like an improvement for the UltraLite it should be straightforward to bring to the other products)

The firmware:
MOTU AVB 1.4.3+92494 for UltraLite AVB and Stage-B16.update

supereb
Established Member
Posts: 78
Joined: Fri Aug 17, 2018 10:55 pm
Has thanked: 21 times
Been thanked: 4 times

Re: Ultralite AVB

Post by supereb »

AudioNarwhal wrote: Sun Nov 27, 2022 2:42 am

I wanted to share this UltraLite firmware (1.4.3+92494) to see if it makes any difference for the better. This firmware attempts to put a watchdog on the USB read-write delta for playback only.

I have an 8pre-ES, and I don't believe I've ever had a problem on the input side. I've noticed that whenever I've lost playback/play through my daw, the input meters and master bus are showing signals - the problem is always going out of the daw. Thanks for working on this. I suspect what ever solves this issue on on the Ultralite will be applicable to your other interfaces, but if there is any way I could be of help using my 8pre-ES, let me know.

shellwalker
Established Member
Posts: 57
Joined: Sun Jan 03, 2021 1:54 pm
Has thanked: 17 times
Been thanked: 7 times

Re: Ultralite AVB

Post by shellwalker »

AudioNarwhal wrote: Sun Nov 27, 2022 2:42 am

...
The firmware:
MOTU AVB 1.4.3+92494 for UltraLite AVB and Stage-B16.update

Hi Dylan,
Thanks for sharing this.
Does this beta FW go together with your kernel patch or can one use it without the kernel patch?

Cheers!

MOTU 828mk3, MOTU 828ES, Cakewalk by Bandlab, Kubuntu 20.04
stanlea
Established Member
Posts: 658
Joined: Wed Apr 25, 2012 9:49 pm
Has thanked: 10 times
Been thanked: 9 times

Re: Ultralite AVB

Post by stanlea »

Could this firmware go for the 828ES ?

AudioNarwhal
Established Member
Posts: 18
Joined: Thu Apr 29, 2021 12:43 pm
Been thanked: 12 times

Re: Ultralite AVB

Post by AudioNarwhal »

shellwalker wrote: Tue Nov 29, 2022 7:02 am

Does this beta FW go together with your kernel patch or can one use it without the kernel patch?

You can use the firmware with or without the patch. The firmware makes the device recover from dropped usb packets and the patch reduces the number of dropped usb packets. So both together should have the best performance, but you can use the firmware alone.

Post Reply