VCV Rack 1.0 released
Moderators: raboof, MattKingUSA, khz
- sysrqer
- Established Member
- Posts: 2523
- Joined: Thu Nov 14, 2013 11:47 pm
- Has thanked: 320 times
- Been thanked: 152 times
- Contact:
VCV Rack 1.0 released
Finally, the long awaited v1 has been released - https://vcvrack.com/Rack.html
The changelog is rather large but most notable changes are listed here - https://community.vcvrack.com/t/an-unof ... -changelog
There is a huge performance boost for me, not only in the multithreading (I was already using the Rcomian fork with this feature) but also the visuals and graphics. Now Rack opens very quickly and is so much more responsive.
The changelog is rather large but most notable changes are listed here - https://community.vcvrack.com/t/an-unof ... -changelog
There is a huge performance boost for me, not only in the multithreading (I was already using the Rcomian fork with this feature) but also the visuals and graphics. Now Rack opens very quickly and is so much more responsive.
- lilith
- Established Member
- Posts: 1698
- Joined: Fri May 27, 2016 11:41 pm
- Location: bLACK fOREST
- Has thanked: 117 times
- Been thanked: 57 times
- Contact:
- sysrqer
- Established Member
- Posts: 2523
- Joined: Thu Nov 14, 2013 11:47 pm
- Has thanked: 320 times
- Been thanked: 152 times
- Contact:
Re: VCV Rack 1.0 released
Not all of them have been ported yet but most of the popular ones are on the way as far as I know. If you look on the vcvrack library page and sort by updated you can see which are already available in v1.lilith wrote:I'm not up to date, but is also the plugin Version updated?
- milo
- Established Member
- Posts: 1242
- Joined: Wed Sep 06, 2017 2:55 am
- Location: Southern Utah, USA
- Has thanked: 275 times
- Been thanked: 218 times
- Contact:
Re: VCV Rack 1.0 released
I downloaded this and played around with it last night, and it is pretty cool. The interface is definitely better than the prerelease version I had been using before. I couldn't get polyphony working, though. I enabled polyphony on the midi input, and the cables got fatter to show visually that it was enabled, but it would still only play one note at a time from my midi controller. Not sure what I was doing wrong, and I tried changing every related polyphony setting. I'll play with it again tonight and see if maybe I was just doing something wrong.
- lilith
- Established Member
- Posts: 1698
- Joined: Fri May 27, 2016 11:41 pm
- Location: bLACK fOREST
- Has thanked: 117 times
- Been thanked: 57 times
- Contact:
Re: VCV Rack 1.0 released
Thanks, if I have a little bit more time I'll check it up. Have to make some new music atm.sysrqer wrote:Not all of them have been ported yet but most of the popular ones are on the way as far as I know. If you look on the vcvrack library page and sort by updated you can see which are already available in v1.lilith wrote:I'm not up to date, but is also the plugin Version updated?
Re: VCV Rack 1.0 released
Hi i have a download version for gnu linux 64 bit...i Start vcv demo mode on debian buster and uses keyboard computer for generic play note,but ' don't recognized audio with setting on jack driver...
gennaro
Hp Elite 8200 3,1 Ghz - 16 Giga Ram Hd 2 Terabyte - Mx Linux 19.4-Ardour 6.8 - Mixbus 7
Asus X54c - Mx Linux 19.4-Ardour 6.8- Mixbus 7-RPI3 + Raspbian Buster- Rpi4 (4giga ram)
Asus X54c - Mx Linux 19.4-Ardour 6.8- Mixbus 7-RPI3 + Raspbian Buster- Rpi4 (4giga ram)
- davephillips
- Established Member
- Posts: 592
- Joined: Sat Aug 15, 2015 1:05 pm
- Has thanked: 35 times
- Been thanked: 23 times
Re: VCV Rack 1.0 released
If you're trying to run the patch in your screenshot you need to select a device in the Audio module. Click where it says No Device, select your interface device, and you should be ready to rock.gennargiu wrote:...i Start vcv demo mode on debian buster and uses keyboard computer for generic play note,but ' don't recognized audio with setting on jack driver...
Best,
dp
Re: VCV Rack 1.0 released
Hi i select jack audio and from no device i have selected my maudio firewire solo,but don't out audio......davephillips wrote:If you're trying to run the patch in your screenshot you need to select a device in the Audio module. Click where it says No Device, select your interface device, and you should be ready to rock.gennargiu wrote:...i Start vcv demo mode on debian buster and uses keyboard computer for generic play note,but ' don't recognized audio with setting on jack driver...
Best,
dp
Hp Elite 8200 3,1 Ghz - 16 Giga Ram Hd 2 Terabyte - Mx Linux 19.4-Ardour 6.8 - Mixbus 7
Asus X54c - Mx Linux 19.4-Ardour 6.8- Mixbus 7-RPI3 + Raspbian Buster- Rpi4 (4giga ram)
Asus X54c - Mx Linux 19.4-Ardour 6.8- Mixbus 7-RPI3 + Raspbian Buster- Rpi4 (4giga ram)
- milo
- Established Member
- Posts: 1242
- Joined: Wed Sep 06, 2017 2:55 am
- Location: Southern Utah, USA
- Has thanked: 275 times
- Been thanked: 218 times
- Contact:
Re: VCV Rack 1.0 released
Polyphony worked last night. Not sure what I did differently, but whatever. This 1.0 release is nice!milo wrote:I downloaded this and played around with it last night, and it is pretty cool. The interface is definitely better than the prerelease version I had been using before. I couldn't get polyphony working, though. I enabled polyphony on the midi input, and the cables got fatter to show visually that it was enabled, but it would still only play one note at a time from my midi controller. Not sure what I was doing wrong, and I tried changing every related polyphony setting. I'll play with it again tonight and see if maybe I was just doing something wrong.
Re: VCV Rack 1.0 released
ok, i have solved problem out audio after setting my audio card firewire solo and jack driver and after konnect in qjack virtual cable It's a beautiful experimental rack modules.
gennaro
gennaro
Hp Elite 8200 3,1 Ghz - 16 Giga Ram Hd 2 Terabyte - Mx Linux 19.4-Ardour 6.8 - Mixbus 7
Asus X54c - Mx Linux 19.4-Ardour 6.8- Mixbus 7-RPI3 + Raspbian Buster- Rpi4 (4giga ram)
Asus X54c - Mx Linux 19.4-Ardour 6.8- Mixbus 7-RPI3 + Raspbian Buster- Rpi4 (4giga ram)
- khz
- Established Member
- Posts: 1648
- Joined: Thu Apr 17, 2008 6:29 am
- Location: German
- Has thanked: 42 times
- Been thanked: 92 times
Re: VCV Rack 1.0 released
The Valley developer uses Linux.
SYNTHFEST 2019 - VCVRack Updates And More To Come - https://youtu.be/mcWfMVgp9xY?t=144
SYNTHFEST 2019 - VCVRack Updates And More To Come - https://youtu.be/mcWfMVgp9xY?t=144
. . . FZ - Does humor belongs in Music?
. . GNU/LINUX@AUDIO ~ /Wiki $ Howto.Info && GNU/Linux Debian installing >> Linux Audio Workstation LAW
. . GNU/LINUX@AUDIO ~ /Wiki $ Howto.Info && GNU/Linux Debian installing >> Linux Audio Workstation LAW
- I don't care about the freedom of speech because I have nothing to say.
-
- Established Member
- Posts: 108
- Joined: Sun Sep 01, 2019 12:58 pm
- Has thanked: 21 times
- Been thanked: 11 times
Re: VCV Rack 1.0 released
The Valley reverb sounds sooo good!khz wrote:The Valley developer uses Linux.
SYNTHFEST 2019 - VCVRack Updates And More To Come - https://youtu.be/mcWfMVgp9xY?t=144
OS: Manjaro
Amp: Echolette M40 / NG51S Tape Echo
Strings: Martin D15M, Yamaha FG-180, Alhambra 5P, Yamaha Revstar
Amp: Echolette M40 / NG51S Tape Echo
Strings: Martin D15M, Yamaha FG-180, Alhambra 5P, Yamaha Revstar