Playing around with SooperLooper I found that the loud noise my mic is producing is annoying.
It's connected to the PC with "the t.bone MicPlug USB Interface" (which also has a headphone output).
I read something about JAMin and live noise reduction and tried it out.
My plan is to use JACK to route the audio through JAMin, SooperLooper and into my headphones. Currently they are plugged into the output of my MicPlug USB Interface.
One thing I noticed that sometimes the PulseAudio JACK Sink/ Source appears in the connection window of QjackCtl. And it automatically connects to the system ins/ outs. I tried to kill it using the command pulseaudio --kill, but after some seconds it reappears and reconnects automatically. If I disconnect it manually it stays disconnected
Now I connected:
System out - JAMin in
JAMin out - SooperLooper in
SooperLooper out - System in
The audio arrives at SooperLooper, but not at my headphones.
Even if I connect them with my PC speaker output. And the internal speakers also stay silent.
I checked the PulseAudio audio mixer ("Volume Control") if the volume is turned up. Still nothing.
What did I do wrong?
In the QjackCtl setup I changed:
Driver: alsa
Interface: U0x11110x2222 (my MicPlug USB Interface)
Sample rate, frames/period, periods/buffer is set on the values of the USB Interface.
The rest is set on default.
I'd be glad if someone could help me.
Thanks in advance!
JACK Routing, JAMin live noise reduction, SooperLooper
Moderators: MattKingUSA, khz
- bluebell
- Established Member
- Posts: 1909
- Joined: Sat Sep 15, 2012 11:44 am
- Location: Saarland, Germany
- Has thanked: 111 times
- Been thanked: 116 times
Re: JACK Routing, JAMin live noise reduction, SooperLooper
Your chain should finally end in system:playback_1 and _2.
Program1 -> program2 -> program3 -> system:playback
Program1 -> program2 -> program3 -> system:playback
Linux – MOTU UltraLite AVB – Qtractor – http://suedwestlicht.saar.de/