I am surely a stupid boy
Moderators: MattKingUSA, khz, spamatica
-
- Established Member
- Posts: 117
- Joined: Sat Mar 02, 2019 5:10 am
- Been thanked: 4 times
I am surely a stupid boy
Hi everyone,
I am back after several covid-monthers with no music. I installed the last 3.1.1 version and I have several misunderstandings. Let note that I had recorded several songs with previous version of Muse.
1- MIDI: I success to heard sounds from my drum device, but not to record an only note. No mouvement onto the graph bar
2- Audio: I can heard audio track recorded and played with Muse, but impossible to record also.
3- The graph into Jack control is worse than chinese for me.
4- When I load a song from previous version I have a message saying it will be converted for the new Muse version. I click OK and back immediately to the desktop.
I join the Jack graph with just Muse opened. Could you tell me how to explain and connect all this stuff please ?
Thank you very much for your help.
Robert
I am back after several covid-monthers with no music. I installed the last 3.1.1 version and I have several misunderstandings. Let note that I had recorded several songs with previous version of Muse.
1- MIDI: I success to heard sounds from my drum device, but not to record an only note. No mouvement onto the graph bar
2- Audio: I can heard audio track recorded and played with Muse, but impossible to record also.
3- The graph into Jack control is worse than chinese for me.
4- When I load a song from previous version I have a message saying it will be converted for the new Muse version. I click OK and back immediately to the desktop.
I join the Jack graph with just Muse opened. Could you tell me how to explain and connect all this stuff please ?
Thank you very much for your help.
Robert
- Attachments
-
- JAck_Muse_open.png (189.29 KiB) Viewed 1204 times
-
- JAck_Muse.png (129.36 KiB) Viewed 1204 times
- oscillator
- Established Member
- Posts: 1127
- Joined: Sat Jan 17, 2015 6:07 pm
- Location: SWEDEN
- Has thanked: 725 times
- Been thanked: 298 times
- Contact:
Re: I am surely a stupid boy
That is one complicated graph!
Without knowing your setup, I would try to enable one thing at a time.
Let's start with
0. no connections
1. disable pulseaudio
See option 4 on https://jackaudio.org/faq/pulseaudio_and_jack.html
2. connect
system > capture_1 to Muse > input 1-0
Can you record anything now?
Without knowing your setup, I would try to enable one thing at a time.
Let's start with
0. no connections
1. disable pulseaudio
See option 4 on https://jackaudio.org/faq/pulseaudio_and_jack.html
2. connect
system > capture_1 to Muse > input 1-0
Can you record anything now?
MusE DAW running on Debian 11 Testing/XFCE4.
https://oscillator.se/musik
-
- Established Member
- Posts: 667
- Joined: Sat Sep 15, 2012 12:36 am
- Has thanked: 38 times
- Been thanked: 107 times
Re: I am surely a stupid boy
Can you run MusE in a terminal, include the -D command-line option (Debug), then make the crash happen and post the text?4- When I load a song from previous version I have a message saying it will be converted for the new Muse version. I click OK and back immediately to the desktop.
(If you know how to do it, a back-trace would help too. I think it works the best when MusE is compiled in Debug mode.)
And if possible, it would really help me if you could post the song, or enough of the song to cause the crash.
I will examine it to see what might be wrong.
Thanks.
Tim.
-
- Established Member
- Posts: 117
- Joined: Sat Mar 02, 2019 5:10 am
- Been thanked: 4 times
Re: I am surely a stupid boy
Thank for your help Tim,
Audio recording is OK. But MIDI recording no. About conversion, the problem occurs with some files, not all.
The setup is:
- Muse 3.1.1
- Edirol UA-25
- Keyboard Korg 5000
- Expander Yamaha CBX-T3
- drum device (a BandHero drum)
The MIDI connection are right.
UA-25 MIDI OUT -> YAMAHA MIDI IN
Keyboard and drum MIDI OUT -> UA-25 MIDI IN
I made the change into JackCtl: pasuspender -- jackd. However Pulseaudio still appears in the graph as you can notice. ????
Audio recording is OK. But MIDI recording no. About conversion, the problem occurs with some files, not all.
The setup is:
- Muse 3.1.1
- Edirol UA-25
- Keyboard Korg 5000
- Expander Yamaha CBX-T3
- drum device (a BandHero drum)
The MIDI connection are right.
UA-25 MIDI OUT -> YAMAHA MIDI IN
Keyboard and drum MIDI OUT -> UA-25 MIDI IN
I made the change into JackCtl: pasuspender -- jackd. However Pulseaudio still appears in the graph as you can notice. ????
- Attachments
-
- Breathe.med.zip
- (9.95 KiB) Downloaded 71 times
-
- Jack_Graph3.png (129.5 KiB) Viewed 1178 times
-
- debug.txt
- (8.38 KiB) Downloaded 67 times
-
- Established Member
- Posts: 667
- Joined: Sat Sep 15, 2012 12:36 am
- Has thanked: 38 times
- Been thanked: 107 times
Re: I am surely a stupid boy
Hi. Thank you for the posts. I am examining the files.
Apologies, I would like to request that you post one more file: The MusE configuration file.
This is found in your home directory under the hidden config folderr:
~/.config/MusE/MusE/MusE-seq.cfg
Thanks.
Tim.
Apologies, I would like to request that you post one more file: The MusE configuration file.
This is found in your home directory under the hidden config folderr:
~/.config/MusE/MusE/MusE-seq.cfg
Thanks.
Tim.
-
- Established Member
- Posts: 117
- Joined: Sat Mar 02, 2019 5:10 am
- Been thanked: 4 times
Re: I am surely a stupid boy
The requested file.
- Attachments
-
- MusE-seq.cfg.zip
- (8.23 KiB) Downloaded 65 times
-
- Established Member
- Posts: 667
- Joined: Sat Sep 15, 2012 12:36 am
- Has thanked: 38 times
- Been thanked: 107 times
Re: I am surely a stupid boy
Crash observed. Thank you!
It is caught in an endless loop inside my latency correction code,
calling Track 5 which calls device jack-midi-0 which calls Track 5 which calls device jack-midi-0... and repeat infinite until crash.
Unfortunately your MusE Settings are set to automatically open the last project when starting, which would always crash.
This will put it back to default, opening a template: Please edit the file MusE-seq.cfg so this line reads:
Optional work-around for now, to allow you to open the song:
Turn off all Latency Correction in Settings.
Bad I know, but it should work.
Please wait, much to do ...
I have filed a bug report for you
Thanks.
Tim.
It is caught in an endless loop inside my latency correction code,
calling Track 5 which calls device jack-midi-0 which calls Track 5 which calls device jack-midi-0... and repeat infinite until crash.
Unfortunately your MusE Settings are set to automatically open the last project when starting, which would always crash.
This will put it back to default, opening a template: Please edit the file MusE-seq.cfg so this line reads:
Code: Select all
<startMode>1</startMode>
Turn off all Latency Correction in Settings.
Bad I know, but it should work.
Please wait, much to do ...
I have filed a bug report for you
Thanks.
Tim.
-
- Established Member
- Posts: 117
- Joined: Sat Mar 02, 2019 5:10 am
- Been thanked: 4 times
Re: I am surely a stupid boy
Thank you Tim. I made the modification into the cfg Muse file.
And I managed to record and listen to the MIDI tracks. But I have to say that It is difficult to understand the MIDI connection into Muse, with MIDI-JACK0 or 2 or 3 ?
And I managed to record and listen to the MIDI tracks. But I have to say that It is difficult to understand the MIDI connection into Muse, with MIDI-JACK0 or 2 or 3 ?
-
- Established Member
- Posts: 667
- Joined: Sat Sep 15, 2012 12:36 am
- Has thanked: 38 times
- Been thanked: 107 times
Re: I am surely a stupid boy
Hi @saturnin51 sorry for the... ahem... delay. (Get it? Latency, delay? )
In git master now:
- Fixed bug 853: Crash in infinite loop in latency code.
Don't examine things connected TO a midi device if examining its 'capture' part.
- Latency code: Optimization of most loops, should be a bit faster now, depending.
Tested OK with your test file and configuration.
Reopen if any more problems, thanks for reporting!
In git master now:
- Fixed bug 853: Crash in infinite loop in latency code.
Don't examine things connected TO a midi device if examining its 'capture' part.
- Latency code: Optimization of most loops, should be a bit faster now, depending.
Tested OK with your test file and configuration.
Reopen if any more problems, thanks for reporting!