Carla Error and close DAW
Moderators: MattKingUSA, khz
Carla Error and close DAW
Hello, I have a problem with Carla for which I have not found a solution.
When I try to load a windows vst this screen appears.
I noticed that she mainly does this with the sessions I saved before formatting the pc, but sometimes she does it with new sessions as well.
Other times it loads the vst but then when I try to open it the DAW closes.
Only a few times I load the vst without problems.
Has anyone had the same problem? Eventually how is it resolved?
When I try to load a windows vst this screen appears.
I noticed that she mainly does this with the sessions I saved before formatting the pc, but sometimes she does it with new sessions as well.
Other times it loads the vst but then when I try to open it the DAW closes.
Only a few times I load the vst without problems.
Has anyone had the same problem? Eventually how is it resolved?
- marbangens
- Established Member
- Posts: 56
- Joined: Fri Nov 16, 2018 8:39 pm
- Been thanked: 6 times
Re: Carla Error and close DAW
try https://github.com/robbert-vdh/yabridge
I think and hope carla will detect the plugins use by carla bridge with yabridge
Depending on what wine version and what kernel and configurations windows vst's work fine for me.
I think and hope carla will detect the plugins use by carla bridge with yabridge
Depending on what wine version and what kernel and configurations windows vst's work fine for me.
Re: Carla Error and close DAW
Thanks, I also thought about using yabridge but I'm not being able to load it into Ardour.marbangens wrote: ↑Sat Jul 10, 2021 12:37 pm try https://github.com/robbert-vdh/yabridge
I think and hope carla will detect the plugins use by carla bridge with yabridge
Depending on what wine version and what kernel and configurations windows vst's work fine for me.
That said, I still hope to be able to find the solution to the problem in a way that doesn't happen to anyone else.
-
- Established Member
- Posts: 219
- Joined: Mon Mar 01, 2021 10:56 pm
- Has thanked: 51 times
- Been thanked: 92 times
- Contact:
Re: Carla Error and close DAW
Did you follow the instructions from the readme? So, the Usage section up through the Automatic Setup section. Did yabridgectl report any warnings or errors when you ran `yabridgectl sync`?
Re: Carla Error and close DAW
robbert-vdh wrote: ↑Tue Jul 13, 2021 10:53 amDid you follow the instructions from the readme? So, the Usage section up through the Automatic Setup section. Did yabridgectl report any warnings or errors when you ran `yabridgectl sync`?
Yes, I get the message:
"zsh: command not found: yabridgectl"
-
- Established Member
- Posts: 219
- Joined: Mon Mar 01, 2021 10:56 pm
- Has thanked: 51 times
- Been thanked: 92 times
- Contact:
Re: Carla Error and close DAW
It's mentioned in the second paragraph here: https://github.com/robbert-vdh/yabridge ... ecommended
If you run just `yabridgectl` in your terminal, your shell (Zsh in your case) will look through the search path directories defined using the PATH environment variable. Because ~/.local/share/yabridge probably isn't part of that environment variable, it cannot find yabridgectl. You need to run ~/.local/share/yabridge/yabridgectl instead, or you can add ~/.local/share/yabridge to your PATH.
Re: Carla Error and close DAW
Ok thanks, I had read wrong.robbert-vdh wrote: ↑Tue Jul 13, 2021 12:44 pmIt's mentioned in the second paragraph here: https://github.com/robbert-vdh/yabridge ... ecommended
If you run just `yabridgectl` in your terminal, your shell (Zsh in your case) will look through the search path directories defined using the PATH environment variable. Because ~/.local/share/yabridge probably isn't part of that environment variable, it cannot find yabridgectl. You need to run ~/.local/share/yabridge/yabridgectl instead, or you can add ~/.local/share/yabridge to your PATH.
Now it doesn't give me errors, I try to set it up and then let you know.
Re: Carla Error and close DAW
I tried, I added the .vst and .vst3 folders as directories but Ardour only sees the vst of the second one.
What could it be?
What could it be?
-
- Established Member
- Posts: 219
- Joined: Mon Mar 01, 2021 10:56 pm
- Has thanked: 51 times
- Been thanked: 92 times
- Contact:
Re: Carla Error and close DAW
Did you force a rescan? Ardour's plugin scanning can be a bit of an adventure of its own at times. Otherwise, make sure the plugins actually show up in `yabridgectl status`, and try rerunning Ardour with `env YABRIDGE_DEBUG_LOG=/tmp/yabridge.log ardour6`, clear the blacklisted plugins, force a rescan, and then check /tmp/yabridge.log.
Re: Carla Error and close DAW
With 'yabridge status' the plugins are all seen, I did as you said but Ardor still can't find them. In /tmp/yabridge.log what exactly should I check?robbert-vdh wrote: ↑Thu Jul 15, 2021 2:35 pmDid you force a rescan? Ardour's plugin scanning can be a bit of an adventure of its own at times. Otherwise, make sure the plugins actually show up in `yabridgectl status`, and try rerunning Ardour with `env YABRIDGE_DEBUG_LOG=/tmp/yabridge.log ardour6`, clear the blacklisted plugins, force a rescan, and then check /tmp/yabridge.log.
-
- Established Member
- Posts: 219
- Joined: Mon Mar 01, 2021 10:56 pm
- Has thanked: 51 times
- Been thanked: 92 times
- Contact:
Re: Carla Error and close DAW
The contents of the file, either Wine or yabridge probably prints some obvious error or warning there. You can just upload the file to https://hastebin.com/ or something and post the link here!-Lera- wrote: ↑Sat Jul 17, 2021 1:57 pmWith 'yabridge status' the plugins are all seen, I did as you said but Ardor still can't find them. In /tmp/yabridge.log what exactly should I check?robbert-vdh wrote: ↑Thu Jul 15, 2021 2:35 pmDid you force a rescan? Ardour's plugin scanning can be a bit of an adventure of its own at times. Otherwise, make sure the plugins actually show up in `yabridgectl status`, and try rerunning Ardour with `env YABRIDGE_DEBUG_LOG=/tmp/yabridge.log ardour6`, clear the blacklisted plugins, force a rescan, and then check /tmp/yabridge.log.
Re: Carla Error and close DAW
Forgive me, I've been trying for 3 days but I can't upload the file.robbert-vdh wrote: ↑Sat Jul 17, 2021 7:19 pmThe contents of the file, either Wine or yabridge probably prints some obvious error or warning there. You can just upload the file to https://hastebin.com/ or something and post the link here!-Lera- wrote: ↑Sat Jul 17, 2021 1:57 pmWith 'yabridge status' the plugins are all seen, I did as you said but Ardor still can't find them. In /tmp/yabridge.log what exactly should I check?robbert-vdh wrote: ↑Thu Jul 15, 2021 2:35 pm
Did you force a rescan? Ardour's plugin scanning can be a bit of an adventure of its own at times. Otherwise, make sure the plugins actually show up in `yabridgectl status`, and try rerunning Ardour with `env YABRIDGE_DEBUG_LOG=/tmp/yabridge.log ardour6`, clear the blacklisted plugins, force a rescan, and then check /tmp/yabridge.log.
However I partially solved it by adding the .vst folder to the vst2 directories of Ardour, bbut it still doesn't see all vst.
PS = Thanks a lot for the concussion anyway.
-
- Established Member
- Posts: 219
- Joined: Mon Mar 01, 2021 10:56 pm
- Has thanked: 51 times
- Been thanked: 92 times
- Contact:
Re: Carla Error and close DAW
As mentioned in the readme, you'll need to add the VstPlugins directory in your Wineprefix that you also added to yabridgectl to Ardour's plugin VST2 plugin paths. Otherwise Ardour doesn't know where to search for them.
Re: Carla Error and close DAW
The point is just that, I added the directory to Ardor but it doesn't see them anyway.robbert-vdh wrote: ↑Thu Jul 22, 2021 11:05 am As mentioned in the readme, you'll need to add the VstPlugins directory in your Wineprefix that you also added to yabridgectl to Ardour's plugin VST2 plugin paths. Otherwise Ardour doesn't know where to search for them.
-
- Established Member
- Posts: 219
- Joined: Mon Mar 01, 2021 10:56 pm
- Has thanked: 51 times
- Been thanked: 92 times
- Contact:
Re: Carla Error and close DAW
Are the plugins actually there? Did `yabridgectl sync` print any warnings or errors, and do the plugins show up when you run `yabridgectl status`? And are they in Ardour's blacklist, or did Ardour not scan them at all? If they're in the blacklist, make sure you downlaoded the correct yabridge verison for your system. If you're using an older distro, like Debian 10, Ubuntu 18.04, Linux Mint 19, or AV-Linux 2021, then you should download the version of yabridge that ends with -ubuntu-18.04.-Lera- wrote: ↑Fri Jul 23, 2021 2:02 pmThe point is just that, I added the directory to Ardor but it doesn't see them anyway.robbert-vdh wrote: ↑Thu Jul 22, 2021 11:05 am As mentioned in the readme, you'll need to add the VstPlugins directory in your Wineprefix that you also added to yabridgectl to Ardour's plugin VST2 plugin paths. Otherwise Ardour doesn't know where to search for them.