It looks like linVST does not pass channel data. I made a test in which MIDI keyboard pressure is configured on several devices. First there's the synth, ACE, native to Linux, Followed by OvertoneDSP RVB500 (native to linux), then Voxengo's Marvel GEQ (linVST), then RVB500 again. The data goes up to the Marvel GEQ and stops there.
UPDATE
The workaround, as far as Bitwig is concerned, is to use a Chain Container, put all types of devices in there but only have one modulation source at the container itself. The container will then distribute in parallel to each device the data, effectively bypassing the limitation of linVST.
linVST and channel data
Moderators: MattKingUSA, khz
-
- Established Member
- Posts: 315
- Joined: Mon Jan 02, 2017 9:46 am
- Has thanked: 1 time
- Been thanked: 5 times
Re: linVST and channel data
As far as I know, LinVst passes on all midi messages except for sysex.
Sysex is possible to pass on but it isn't implemented.
I don't know much about Bitwig's MPE but maybe
Right-click your MPE enabled instrument and select "Force MPE Mode".
Sysex is possible to pass on but it isn't implemented.
I don't know much about Bitwig's MPE but maybe
Right-click your MPE enabled instrument and select "Force MPE Mode".