No sorry. Whenever I run trace with Ardour, it crashes, never loads all plugins etc. Even as this being a fresh install of Arch.Michael Willis wrote:Aww, I thought I fixed the crash on exit. Thanks for testing it, I'll see what I can find out. Did you happen to capture any more information when it crashed, like a stack trace or terminal output?funkmuscle wrote:Just tried in Mixbus 32C and it crashed Mixbus when I tried closing plugin. Same deal with Ardour. Both lv2 and VST tried.
I'm on Arch.
Dragonfly Hall Reverb
Moderators: MattKingUSA, khz
- funkmuscle
- Established Member
- Posts: 2813
- Joined: Mon Jun 02, 2008 2:30 pm
- Has thanked: 132 times
- Been thanked: 34 times
Re: Dragonfly Hall Reverb
- Michael Willis
- Established Member
- Posts: 1460
- Joined: Mon Oct 03, 2016 3:27 pm
- Location: Rocky Mountains, North America
- Has thanked: 71 times
- Been thanked: 169 times
- Contact:
Re: Dragonfly Hall Reverb
Ok, thanks again for reporting the crash. Let's see what happens for other people. I tested the mac VST and LV2 rather extensively in Ardour and didn't experience the crash, but I only tested the Linux version in Carla. Both the Linux VST and LV2 versions worked there without crashing. I'll try both of the Linux ones in Ardour over the weekend.funkmuscle wrote:No sorry. Whenever I run trace with Ardour, it crashes, never loads all plugins etc. Even as this being a fresh install of Arch.
Last edited by Michael Willis on Fri Apr 06, 2018 5:39 pm, edited 1 time in total.
- funkmuscle
- Established Member
- Posts: 2813
- Joined: Mon Jun 02, 2008 2:30 pm
- Has thanked: 132 times
- Been thanked: 34 times
Re: Dragonfly Hall Reverb
Sweet! Thanx again for the awesome work y'all are doing.Michael Willis wrote:Ok, thanks again for reporting the crash. Let's see what happens for other people. I tested the mac version rather extensively in Ardour and didn't experience the crash, but I only tested the Linux version in Carla. Both the Linux VST and LV2 versions worked there without crashing. I'll try both of the Linux ones in Ardour over the weekend.funkmuscle wrote:No sorry. Whenever I run trace with Ardour, it crashes, never loads all plugins etc. Even as this being a fresh install of Arch.
-
- Established Member
- Posts: 528
- Joined: Thu Sep 01, 2011 9:07 pm
- Has thanked: 88 times
- Been thanked: 23 times
Re: Dragonfly Hall Reverb
OK, I've tried (the LV2) and indeed it crashes on exit. (It sounded and looked good before that, though!)Michael Willis wrote:Aww, I thought I fixed the crash on exit. Thanks for testing it, I'll see what I can find out. Did you happen to capture any more information when it crashed, like a stack trace or terminal output?funkmuscle wrote:Just tried in Mixbus 32C and it crashed Mixbus when I tried closing plugin. Same deal with Ardour. Both lv2 and VST tried.
I'm on Arch.
Here are messages on the terminal:
Code: Select all
[snip]
WARNING: this host does not send sample-rate information for LV2 UIs, using 44100 as fallback (this could be wrong)
double free or corruption (out)
Aborted
Code: Select all
recvmsg(7, {msg_name=NULL, msg_namelen=0, msg_iov=[{iov_base="\241 G\1e\21\340\7\220\1\0\0\0\0\0\0\5\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., iov_len=4096}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 64
recvmsg(7, {msg_namelen=0}, 0) = -1 EAGAIN (Resource temporarily unavailable)
futex(0x563bbe764414, FUTEX_WAKE_PRIVATE, 2147483647) = 1
futex(0x563bbe764418, FUTEX_UNLOCK_PI_PRIVATE) = 0
writev(2, [{iov_base="double free or corruption (out)", iov_len=31}, {iov_base="\n", iov_len=1}], 2double free or corruption (out)
) = 32
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0c8c000000
rt_sigprocmask(SIG_UNBLOCK, [ABRT], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, ~[RTMIN RT_1], [PIPE], 8) = 0
getpid() = 16551
gettid() = 16551
tgkill(16551, 16551, SIGABRT) = 0
rt_sigprocmask(SIG_SETMASK, [PIPE], NULL, 8) = 0
--- SIGABRT {si_signo=SIGABRT, si_code=SI_TKILL, si_pid=16551, si_uid=1000} ---
+++ killed by SIGABRT +++
- Michael Willis
- Established Member
- Posts: 1460
- Joined: Mon Oct 03, 2016 3:27 pm
- Location: Rocky Mountains, North America
- Has thanked: 71 times
- Been thanked: 169 times
- Contact:
Re: Dragonfly Hall Reverb
Thanks Finotti!finotti wrote:OK, I've tried (the LV2) and indeed it crashes on exit. (It sounded and looked good before that, though!)
I made another update that I think might fix the crash on exit. I don't have access to my Linux machine right now, but it still works on the Mac. If anybody is inclined to compile the latest and test it on linux, please let me know how it goes. I'll try it on Linux later today, if it goes well I'll put another release up on github.
- funkmuscle
- Established Member
- Posts: 2813
- Joined: Mon Jun 02, 2008 2:30 pm
- Has thanked: 132 times
- Been thanked: 34 times
Re: Dragonfly Hall Reverb
did a fresh pull from git and the lv2 crashes Ardour but the VST is fine so far. No crashing of Ardour when exiting the VST.Michael Willis wrote:Thanks Finotti!finotti wrote:OK, I've tried (the LV2) and indeed it crashes on exit. (It sounded and looked good before that, though!)
I made another update that I think might fix the crash on exit. I don't have access to my Linux machine right now, but it still works on the Mac. If anybody is inclined to compile the latest and test it on linux, please let me know how it goes. I'll try it on Linux later today, if it goes well I'll put another release up on github.
The only thing is the VST doesn't have the presets but the lv2 does. Dunno if that was mentioned earlier in this thread.
- funkmuscle
- Established Member
- Posts: 2813
- Joined: Mon Jun 02, 2008 2:30 pm
- Has thanked: 132 times
- Been thanked: 34 times
Re: Dragonfly Hall Reverb
oh ok falkTX. thanxfalkTX wrote:In DPF, presets for VST are not exported. Too much hassle to make it work per spec.
- Michael Willis
- Established Member
- Posts: 1460
- Joined: Mon Oct 03, 2016 3:27 pm
- Location: Rocky Mountains, North America
- Has thanked: 71 times
- Been thanked: 169 times
- Contact:
Re: Dragonfly Hall Reverb
Thanks for testing it again, I'll have to spend more time on the lv2 in Linux.funkmuscle wrote: did a fresh pull from git and the lv2 crashes Ardour but the VST is fine so far. No crashing of Ardour when exiting the VST.
The only thing is the VST doesn't have the presets but the lv2 does. Dunno if that was mentioned earlier in this thread.
Rghvdberg did implement a feature that allows you to select presets from the GUI... isn't that working in the VST?
- funkmuscle
- Established Member
- Posts: 2813
- Joined: Mon Jun 02, 2008 2:30 pm
- Has thanked: 132 times
- Been thanked: 34 times
Re: Dragonfly Hall Reverb
no and according to falkTXMichael Willis wrote:Thanks for testing it again, I'll have to spend more time on the lv2 in Linux.funkmuscle wrote: did a fresh pull from git and the lv2 crashes Ardour but the VST is fine so far. No crashing of Ardour when exiting the VST.
The only thing is the VST doesn't have the presets but the lv2 does. Dunno if that was mentioned earlier in this thread.
Rghvdberg did implement a feature that allows you to select presets from the GUI... isn't that working in the VST?
falkTX wrote:
In DPF, presets for VST are not exported. Too much hassle to make it work per spec.
- funkmuscle
- Established Member
- Posts: 2813
- Joined: Mon Jun 02, 2008 2:30 pm
- Has thanked: 132 times
- Been thanked: 34 times
Re: Dragonfly Hall Reverb
ok now I understand. So Michael, only the default preset is there in the VST. On the LV2 it's all there but as mentioned, crashes on exit.falkTX wrote:exported presets are different from changing values from the UI.
the UI preset stuff should work on all plugin versions.
- Michael Willis
- Established Member
- Posts: 1460
- Joined: Mon Oct 03, 2016 3:27 pm
- Location: Rocky Mountains, North America
- Has thanked: 71 times
- Been thanked: 169 times
- Contact:
Re: Dragonfly Hall Reverb
Ok, for real this time! This weekend I tested on Linux to find the cause of the crash-on-exit (off-by-one error, rawr ). I made a new release with Linux VST, LV2, and the standalone Jack app: https://github.com/michaelwillis/dragon ... /tag/0.9.0
Funkmuscle, I'm not sure about presets and VST, the behavior of DPF's preset mechanism is different between VST and LV2 versions. For what it's worth, now that I've fixed the bug I recommend the LV2 version.
Funkmuscle, I'm not sure about presets and VST, the behavior of DPF's preset mechanism is different between VST and LV2 versions. For what it's worth, now that I've fixed the bug I recommend the LV2 version.
- funkmuscle
- Established Member
- Posts: 2813
- Joined: Mon Jun 02, 2008 2:30 pm
- Has thanked: 132 times
- Been thanked: 34 times
Re: Dragonfly Hall Reverb
All is well now!! I removed anything to do with the DragonFly and reinstalled. Both VST and LV2 are fineMichael Willis wrote:Ok, for real this time! This weekend I tested on Linux to find the cause of the crash-on-exit (off-by-one error, rawr ). I made a new release with Linux VST, LV2, and the standalone Jack app: https://github.com/michaelwillis/dragon ... /tag/0.9.0
Funkmuscle, I'm not sure about presets and VST, the behavior of DPF's preset mechanism is different between VST and LV2 versions. For what it's worth, now that I've fixed the bug I recommend the LV2 version.
- Michael Willis
- Established Member
- Posts: 1460
- Joined: Mon Oct 03, 2016 3:27 pm
- Location: Rocky Mountains, North America
- Has thanked: 71 times
- Been thanked: 169 times
- Contact:
Re: Dragonfly Hall Reverb
Woohoo! Great success! Unless somebody else has trouble, I think all that's left is to make proper credits and cut a 1.0 release.funkmuscle wrote:All is well now!! I removed anything to do with the DragonFly and reinstalled. Both VST and LV2 are fine
- funkmuscle
- Established Member
- Posts: 2813
- Joined: Mon Jun 02, 2008 2:30 pm
- Has thanked: 132 times
- Been thanked: 34 times
Re: Dragonfly Hall Reverb
Sweet!! thanx again guys!Michael Willis wrote:Woohoo! Great success! Unless somebody else has trouble, I think all that's left is to make proper credits and cut a 1.0 release.funkmuscle wrote:All is well now!! I removed anything to do with the DragonFly and reinstalled. Both VST and LV2 are fine
-
- Established Member
- Posts: 528
- Joined: Thu Sep 01, 2011 9:07 pm
- Has thanked: 88 times
- Been thanked: 23 times
Re: Dragonfly Hall Reverb
Working great here! Thanks for all your work!Michael Willis wrote:Ok, for real this time! This weekend I tested on Linux to find the cause of the crash-on-exit (off-by-one error, rawr ). I made a new release with Linux VST, LV2, and the standalone Jack app: https://github.com/michaelwillis/dragon ... /tag/0.9.0
Funkmuscle, I'm not sure about presets and VST, the behavior of DPF's preset mechanism is different between VST and LV2 versions. For what it's worth, now that I've fixed the bug I recommend the LV2 version.