Jack doesn't works

Unofficial support for the KXStudio Linux distribution and applications.
More info at http://kxstudio.linuxaudio.org/

Moderators: MattKingUSA, khz

Post Reply
carlos
Established Member
Posts: 9
Joined: Sun Nov 25, 2012 8:18 pm

Jack doesn't works

Post by carlos »

Hi, I'm on KXStudio 12.04, Linux kxstudio32 3.8.0-32-lowlatency #24-Ubuntu SMP PREEMPT Tue Oct 15 20:28:21 UTC 2013 i686 athlon i386 GNU/Linux

Everything was working flawlessly, but lately, after some updates, jack doesn't works at all. I've tried to configure it in cadence, but non of all the options I've tried had success.

My sound card is a Terratec DMX6Fire

Code: Select all

 cat /proc/asound/cards /proc/asound/modules 
 0 [DMX6Fire       ]: ICE1712 - TerraTec DMX6Fire
                      TerraTec DMX6Fire at 0xe800, irq 17
 1 [Loopback       ]: Loopback - Loopback
                      Loopback 1
 0 snd_ice1712
 1 snd_aloop

Here is the log:


Code: Select all

Mon Aug  4 21:20:23 2014: Controller deactivated.
Mon Aug  4 21:20:24 2014: ------------------
Mon Aug  4 21:20:24 2014: Controller activated. Version 1.9.10 (0+) built on Thu May  8 19:44:16 2014
Mon Aug  4 21:20:24 2014: Loading settings from "/home/carlos/.config/jack/conf.xml" using expat_2.0.1 ...
Mon Aug  4 21:20:24 2014: setting parameter 'engine':'driver':'(null)' to value "alsa"
Mon Aug  4 21:20:24 2014: setting parameter 'drivers':'alsa':'device' to value "hw:DMX6Fire,0"
Mon Aug  4 21:20:24 2014: setting parameter 'drivers':'alsa':'rate' to value "44100"
Mon Aug  4 21:20:24 2014: Listening for D-Bus messages
Mon Aug  4 21:20:24 2014: Starting jack server...
Mon Aug  4 21:20:24 2014: JACK server starting in realtime mode with priority 10
Mon Aug  4 21:20:24 2014: self-connect-mode is "Don't restrict self connect requests"
Mon Aug  4 21:20:24 2014: Acquired audio card Audio0
Mon Aug  4 21:20:24 2014: creating alsa driver ... hw:DMX6Fire,0|hw:DMX6Fire,0|1024|2|44100|0|0|nomon|swmeter|-|32bit
Mon Aug  4 21:20:24 2014: Using ALSA driver ICE1712 running on card 0 - TerraTec DMX6Fire at 0xe800, irq 17
Mon Aug  4 21:20:24 2014: configuring for 44100Hz, period = 1024 frames (23.2 ms), buffer = 2 periods
Mon Aug  4 21:20:24 2014: ALSA: final selected sample format for capture: 32bit integer little-endian
Mon Aug  4 21:20:24 2014: ALSA: use 2 periods for capture
Mon Aug  4 21:20:24 2014: ALSA: final selected sample format for playback: 32bit integer little-endian
Mon Aug  4 21:20:24 2014: ALSA: use 2 periods for playback
Mon Aug  4 21:20:29 2014: ERROR: JackPosixProcessSync::LockedTimedWait error usec = 5000000 err = Connection timed out
Mon Aug  4 21:20:29 2014: ERROR: Driver is not running
Mon Aug  4 21:20:29 2014: ERROR: Cannot open client name = dbusapi
Mon Aug  4 21:20:29 2014: ERROR: failed to create dbusapi jack client
Mon Aug  4 21:20:34 2014: ERROR: JackPosixProcessSync::LockedTimedWait error usec = 5000000 err = Connection timed out
Mon Aug  4 21:20:34 2014: ERROR: Driver is not running
Mon Aug  4 21:20:34 2014: ERROR: Cannot create new client
Mon Aug  4 21:20:36 2014: ------------------
Mon Aug  4 21:20:36 2014: Controller activated. Version 1.9.10 (0+) built on Thu May  8 19:44:16 2014
Mon Aug  4 21:20:36 2014: Loading settings from "/home/carlos/.config/jack/conf.xml" using expat_2.0.1 ...
Mon Aug  4 21:20:36 2014: setting parameter 'engine':'driver':'(null)' to value "alsa"
Mon Aug  4 21:20:36 2014: setting parameter 'drivers':'alsa':'device' to value "hw:DMX6Fire,0"
Mon Aug  4 21:20:36 2014: setting parameter 'drivers':'alsa':'rate' to value "44100"
Mon Aug  4 21:20:36 2014: Listening for D-Bus messages
Mon Aug  4 21:20:36 2014: Starting jack server...
Mon Aug  4 21:20:36 2014: JACK server starting in realtime mode with priority 10
Mon Aug  4 21:20:36 2014: self-connect-mode is "Don't restrict self connect requests"
Mon Aug  4 21:20:37 2014: Acquired audio card Audio0
Mon Aug  4 21:20:37 2014: creating alsa driver ... hw:DMX6Fire,0|hw:DMX6Fire,0|1024|2|44100|0|0|nomon|swmeter|-|32bit
Mon Aug  4 21:20:37 2014: Using ALSA driver ICE1712 running on card 0 - TerraTec DMX6Fire at 0xe800, irq 17
Mon Aug  4 21:20:37 2014: configuring for 44100Hz, period = 1024 frames (23.2 ms), buffer = 2 periods
Mon Aug  4 21:20:37 2014: ALSA: final selected sample format for capture: 32bit integer little-endian
Mon Aug  4 21:20:37 2014: ALSA: use 2 periods for capture
Mon Aug  4 21:20:37 2014: ALSA: final selected sample format for playback: 32bit integer little-endian
Mon Aug  4 21:20:37 2014: ALSA: use 2 periods for playback
Mon Aug  4 21:20:42 2014: ERROR: JackPosixProcessSync::LockedTimedWait error usec = 5000000 err = Connection timed out
Mon Aug  4 21:20:42 2014: ERROR: Driver is not running
Mon Aug  4 21:20:42 2014: ERROR: Cannot open client name = dbusapi
Mon Aug  4 21:20:42 2014: ERROR: failed to create dbusapi jack client
Mon Aug  4 21:21:11 2014: ERROR: ALSA: poll time out, polled for 34828036 usecs
Mon Aug  4 21:21:11 2014: ERROR: JackAudioDriver::ProcessAsync: read error, stopping...
Mon Aug  4 21:21:11 2014: Released audio card Audio0
Mon Aug  4 21:22:16 2014: Saving settings to "/home/carlos/.config/jack/conf.xml" ...
Mon Aug  4 21:22:52 2014: Saving settings to "/home/carlos/.config/jack/conf.xml" ...
Mon Aug  4 21:22:53 2014: Starting jack server...
Mon Aug  4 21:22:53 2014: JACK server starting in realtime mode with priority 10
Mon Aug  4 21:22:53 2014: self-connect-mode is "Don't restrict self connect requests"
Mon Aug  4 21:22:53 2014: Acquired audio card Audio0
Mon Aug  4 21:22:53 2014: creating alsa driver ... hw:DMX6Fire,0|hw:DMX6Fire,0|1024|2|44100|0|0|nomon|swmeter|-|32bit
Mon Aug  4 21:22:53 2014: Using ALSA driver ICE1712 running on card 0 - TerraTec DMX6Fire at 0xe800, irq 17
Mon Aug  4 21:22:53 2014: configuring for 44100Hz, period = 1024 frames (23.2 ms), buffer = 2 periods
Mon Aug  4 21:22:53 2014: ALSA: final selected sample format for capture: 32bit integer little-endian
Mon Aug  4 21:22:53 2014: ALSA: use 2 periods for capture
Mon Aug  4 21:22:53 2014: ALSA: final selected sample format for playback: 32bit integer little-endian
Mon Aug  4 21:22:53 2014: ALSA: use 2 periods for playback
Mon Aug  4 21:22:58 2014: ERROR: JackPosixProcessSync::LockedTimedWait error usec = 5000000 err = Connection timed out
Mon Aug  4 21:22:58 2014: ERROR: Driver is not running
Mon Aug  4 21:22:58 2014: ERROR: Cannot open client name = dbusapi
Mon Aug  4 21:22:58 2014: ERROR: failed to create dbusapi jack client
Mon Aug  4 21:23:28 2014: ERROR: ALSA: poll time out, polled for 34828043 usecs
Mon Aug  4 21:23:28 2014: ERROR: JackAudioDriver::ProcessAsync: read error, stopping...
Mon Aug  4 21:23:28 2014: Released audio card Audio0
Mon Aug  4 21:23:32 2014: Saving settings to "/home/carlos/.config/jack/conf.xml" ...
Mon Aug  4 21:25:17 2014: Starting jack server...
Mon Aug  4 21:25:17 2014: ERROR: `default' server already active
Mon Aug  4 21:25:17 2014: ERROR: Failed to open server
Mon Aug  4 21:25:18 2014: Saving settings to "/home/carlos/.config/jack/conf.xml" ...
Mon Aug  4 21:25:21 2014: Starting jack server...
Mon Aug  4 21:25:21 2014: JACK server starting in realtime mode with priority 10
Mon Aug  4 21:25:21 2014: self-connect-mode is "Don't restrict self connect requests"
Mon Aug  4 21:25:21 2014: Acquired audio card Audio0
Mon Aug  4 21:25:21 2014: creating alsa driver ... hw:DMX6Fire,0|hw:DMX6Fire,0|1024|2|44100|0|0|nomon|swmeter|-|32bit
Mon Aug  4 21:25:21 2014: Using ALSA driver ICE1712 running on card 0 - TerraTec DMX6Fire at 0xe800, irq 17
Mon Aug  4 21:25:21 2014: configuring for 44100Hz, period = 1024 frames (23.2 ms), buffer = 2 periods
Mon Aug  4 21:25:21 2014: ALSA: final selected sample format for capture: 32bit integer little-endian
Mon Aug  4 21:25:21 2014: ALSA: use 2 periods for capture
Mon Aug  4 21:25:21 2014: ALSA: final selected sample format for playback: 32bit integer little-endian
Mon Aug  4 21:25:21 2014: ALSA: use 2 periods for playback
Mon Aug  4 21:25:26 2014: ERROR: JackPosixProcessSync::LockedTimedWait error usec = 5000000 err = Connection timed out
Mon Aug  4 21:25:26 2014: ERROR: Driver is not running
Mon Aug  4 21:25:26 2014: ERROR: Cannot open client name = dbusapi
Mon Aug  4 21:25:26 2014: ERROR: failed to create dbusapi jack client
Mon Aug  4 21:25:53 2014: ERROR: JackPosixProcessSync::LockedTimedWait error usec = 5000000 err = Connection timed out
Mon Aug  4 21:25:53 2014: ERROR: Driver is not running
Mon Aug  4 21:25:53 2014: ERROR: Cannot create new client
Mon Aug  4 21:25:56 2014: ERROR: ALSA: poll time out, polled for 34828027 usecs
Mon Aug  4 21:25:56 2014: ERROR: JackAudioDriver::ProcessAsync: read error, stopping...
Mon Aug  4 21:25:56 2014: Released audio card Audio0
Mon Aug  4 21:25:56 2014: Saving settings to "/home/carlos/.config/jack/conf.xml" ...
Mon Aug  4 21:28:41 2014: Saving settings to "/home/carlos/.config/jack/conf.xml" ...
Mon Aug  4 21:30:04 2014: Saving settings to "/home/carlos/.config/jack/conf.xml" ...

I've tried to do everything I could, as i'm just a musician... :(

Thank you very much in advance.
CAdence-1.png
CAdence-1.png (90.35 KiB) Viewed 422 times
Cadence-2.png
Cadence-2.png (78.57 KiB) Viewed 422 times
Cadence-3.png
Cadence-3.png (71.81 KiB) Viewed 422 times
Top
carlos
Established Member
Posts: 9
Joined: Sun Nov 25, 2012 8:18 pm

Re: Jack doesn't works (SOLVED)

Post by carlos »

Ok, couldn't fine other solution than reinstalling. Now everything is working again.
Top
bazsound
Established Member
Posts: 480
Joined: Sat Aug 03, 2013 11:46 am

Re: Jack doesn't works (SOLVED)

Post by bazsound »

carlos wrote:Ok, couldn't fine other solution than reinstalling. Now everything is working again.

eh realtime priority 10?

Not sure if it would make a difference but thats pretty low. MIne is 85

also waht about input and output device which are set to none.
Top
carlos
Established Member
Posts: 9
Joined: Sun Nov 25, 2012 8:18 pm

Re: Jack doesn't works

Post by carlos »

bazsound wrote: eh realtime priority 10?

Not sure if it would make a difference but thats pretty low. MIne is 85
Yeah, I did try a lot of settings here, none of it worked, even 85,
this is default cadence setup, If i'm not wrong.
I know 10 is pretty low, it was the last one I tried.
bazsound wrote: also waht about input and output device which are set to none.
As far as I know this is the default setup for using inputs and outputs from selected device.
Anyway, I have a Lubuntu-14.04 installation, with KXStudio repos, working beautifuly again :)

Thanks for your response, bazsound.
Top
Post Reply

Return to “KXStudio Discussion”