USB tethering is where the tablet or phone acts as a USB ethernet device to the computer, providing network access and acting like the router for the computer. I'm not sure if that would work either but I thought it might be worth a try.
I notice that the computer is x.x.1.x and the tablet is x.x.3.x. which puts them on different subnets. I'm guessing then that the computer is using ethernet instead of wifi. One thing to try if possible would be to get a usb wifi card or something so they are on the same subnet. Another to try is sending the OSC from the computer to the tablet using oscsend.
I'm just trying to come up with ideas. I haven't experienced this before and I'm not really a networking expert.
Got TouchDAW working with Ardour
Moderators: MattKingUSA, khz
Re: Got TouchDAW working with Ardour
_ssj71
music: https://soundcloud.com/ssj71
My plugins are Infamous! http://ssj71.github.io/infamousPlugins
I just want to get back to making music!
music: https://soundcloud.com/ssj71
My plugins are Infamous! http://ssj71.github.io/infamousPlugins
I just want to get back to making music!
Re: Got TouchDAW working with Ardour
Yes, the computer is on Ethernet, but it has a Wifi card. I tried connecting the computer and the tablet to another router over Wifi, and it still didn't work.
I would like to try sending OSC from the computer to the tablet, but how is the tablet supposed to receive it? I don't suppose I can install osc2midi on Android.
I would like to try sending OSC from the computer to the tablet, but how is the tablet supposed to receive it? I don't suppose I can install osc2midi on Android.
-
- Established Member
- Posts: 197
- Joined: Fri Mar 13, 2015 10:52 pm
- Has thanked: 10 times
- Been thanked: 19 times
Re: Got TouchDAW working with Ardour
You didn't say anything about making the JACK connections. When I use TouchDaw and Ardour I refer to this page to remind me on how to set it up.
http://swampyankeesound.com/touchdaw.html
http://swampyankeesound.com/touchdaw.html
Re: Got TouchDAW working with Ardour
Well, right now we're having trouble with the OSC part which is completely independent of jack.CraigPid wrote:You didn't say anything about making the JACK connections.
You should be able to send a value to control or ardroid and move a slider or knob or toggle a button or whatever from the computer. So you'll have to make sure you format the message properly for the widget.Luc wrote:I would like to try sending OSC from the computer to the tablet, but how is the tablet supposed to receive it? I don't suppose I can install osc2midi on Android.
_ssj71
music: https://soundcloud.com/ssj71
My plugins are Infamous! http://ssj71.github.io/infamousPlugins
I just want to get back to making music!
music: https://soundcloud.com/ssj71
My plugins are Infamous! http://ssj71.github.io/infamousPlugins
I just want to get back to making music!
Re: Got TouchDAW working with Ardour
Some newer wifi routers block igmp between the wired and wifi networks. In particular the verizon/frontier actiontec(s).
http://superuser.com/questions/730288/w ... o-wireless
https://forums.verizon.com/t5/Fios-Inte ... d-p/461359
At one point there was a deep (unreachable unless you knew the URL) admin screen to set this on or off but they have totally eliminated that
I had TouchDAW going fine until a verizon upgrade where it was very difficult to discover the issue.
In my case I've gone to using an older netgear wifi router that I just use for the studio setup.
YMMV
http://superuser.com/questions/730288/w ... o-wireless
https://forums.verizon.com/t5/Fios-Inte ... d-p/461359
At one point there was a deep (unreachable unless you knew the URL) admin screen to set this on or off but they have totally eliminated that
I had TouchDAW going fine until a verizon upgrade where it was very difficult to discover the issue.
In my case I've gone to using an older netgear wifi router that I just use for the studio setup.
YMMV
fdaw: Fedora 24, AMD FX - 9590, 32 GB, 2x256GB SSD, 1x6TB HDD, Presonus FP10, JACK, Ardour5, MixBus, Qtractor, MIXXX, TouchDAW
-
- Established Member
- Posts: 363
- Joined: Sat Nov 17, 2012 3:36 pm
Re: Got TouchDAW working with Ardour
Hi
Back to the original topic. I tried to connect TouchDAW to Ardour (currently Ardour 4), following the instructions of the first couple of mails. But the issues that were mentioned about feedback seem to persist on my setup. I get no feedback whatsoever to TouchDAW. I link qmidinet in and out of Ardour, I enable feedback from the Ardour Mackie properties, but... nothing. Also, the feedback setting refuses to get saved in the Ardour file. Any suggestions?
Back to the original topic. I tried to connect TouchDAW to Ardour (currently Ardour 4), following the instructions of the first couple of mails. But the issues that were mentioned about feedback seem to persist on my setup. I get no feedback whatsoever to TouchDAW. I link qmidinet in and out of Ardour, I enable feedback from the Ardour Mackie properties, but... nothing. Also, the feedback setting refuses to get saved in the Ardour file. Any suggestions?
Vox, Selmer, Yamaha and Leslie amplifiers. Rickenbacker, Epiphone, Ibanez, Washburn, Segovia, Yamaha and Fender guitars. Hammond, Moog, Roland, Korg, Yamaha, Crumar, Ensoniq and Mellotron keyboards. Xubuntu+KXStudio recording setup.