automation with zynaddsubfx | yoshimi
Moderators: MattKingUSA, khz
automation with zynaddsubfx | yoshimi
Hi,
I tried doing automation with qtractor (svn) and zynaddsubfx, but I didn't got it working. Maybe someone has experience with it?
(http://zynaddsubfx.sourceforge.net/doc_3.html)
I tried doing automation with qtractor (svn) and zynaddsubfx, but I didn't got it working. Maybe someone has experience with it?
(http://zynaddsubfx.sourceforge.net/doc_3.html)
- autostatic
- Established Member
- Posts: 1994
- Joined: Wed Dec 09, 2009 5:26 pm
- Location: Beverwijk, The Netherlands
- Has thanked: 32 times
- Been thanked: 104 times
- Contact:
Re: automation with zynaddsubfx | yoshimi
What do you want to automate? I have some experience with it so shoot!
Re: automation with zynaddsubfx | yoshimi
Doesn't matter, volume, ... , whatever...AutoStatic wrote:What do you want to automate? I have some experience with it so shoot!
Just to be able to do it.
- autostatic
- Established Member
- Posts: 1994
- Joined: Wed Dec 09, 2009 5:26 pm
- Location: Beverwijk, The Netherlands
- Has thanked: 32 times
- Been thanked: 104 times
- Contact:
Re: automation with zynaddsubfx | yoshimi
For volume, add a MIDI track and record your Volume MIDI CC-messages. You can then edit them in the Piano Roll by selecting Controller in the second selection box and 7 - Volume (coarse) in the third selection box. Afterwards you should be able to copy and paste this automated volume MIDI part in an existing MIDI track.
- Attachments
-
- MIDI - Volume automation - Qtractor.png (113.41 KiB) Viewed 2822 times
Re: automation with zynaddsubfx | yoshimi
thanks
And what should I do in zynaddsubfx? Is there an easy way to check if it works. Do I have to see knobs moving in zyn for example?
Don't understand this part ^Afterwards you should be able to copy and paste this automated volume MIDI part in an existing MIDI track.
And what should I do in zynaddsubfx? Is there an easy way to check if it works. Do I have to see knobs moving in zyn for example?
- autostatic
- Established Member
- Posts: 1994
- Joined: Wed Dec 09, 2009 5:26 pm
- Location: Beverwijk, The Netherlands
- Has thanked: 32 times
- Been thanked: 104 times
- Contact:
Re: automation with zynaddsubfx | yoshimi
Did some testing but with Qtractor 0.4.5 neither Yoshimi or PHASEX pick up the controller CC's. But it did work with Qtractor 0.4.3. Weird.
Re: automation with zynaddsubfx | yoshimi
I hope they'll release a new zynaddsubfx version soon. Automation works very nicely in the zynaddsubfx vst, and I think the regular version will have the same functionality in the next release.
- autostatic
- Established Member
- Posts: 1994
- Joined: Wed Dec 09, 2009 5:26 pm
- Location: Beverwijk, The Netherlands
- Has thanked: 32 times
- Been thanked: 104 times
- Contact:
Re: automation with zynaddsubfx | yoshimi
I've been recording some new ideas so I haven't had the time to look into this studio32. No one else has any pointers btw?
- rncbc
- Established Member
- Posts: 1071
- Joined: Mon Apr 19, 2010 12:20 pm
- Has thanked: 45 times
- Been thanked: 279 times
- Contact:
Re: automation with zynaddsubfx | yoshimi
as a matter of fact, midi cc7 (volume) and cc10 (pan) were being trapped internally by qtractor, so that main mixer strip controls would prevail at all times instead.
reasons for this (mis-)feature are lost in time. weird thing is that it was present in 0.4.3 and probably several iterations before.
ntl, it is "fixed" on svn trunk (qtractor 0.4.5.1555+)
thanks && enjoy
reasons for this (mis-)feature are lost in time. weird thing is that it was present in 0.4.3 and probably several iterations before.
ntl, it is "fixed" on svn trunk (qtractor 0.4.5.1555+)
thanks && enjoy
- autostatic
- Established Member
- Posts: 1994
- Joined: Wed Dec 09, 2009 5:26 pm
- Location: Beverwijk, The Netherlands
- Has thanked: 32 times
- Been thanked: 104 times
- Contact:
- autostatic
- Established Member
- Posts: 1994
- Joined: Wed Dec 09, 2009 5:26 pm
- Location: Beverwijk, The Netherlands
- Has thanked: 32 times
- Been thanked: 104 times
- Contact:
Re: automation with zynaddsubfx | yoshimi
Code: Select all
Checked out revision 1549.
- autostatic
- Established Member
- Posts: 1994
- Joined: Wed Dec 09, 2009 5:26 pm
- Location: Beverwijk, The Netherlands
- Has thanked: 32 times
- Been thanked: 104 times
- Contact: