Boss RC-300 Audio interface appears but Jack does not work with it
Moderators: MattKingUSA, khz
Boss RC-300 Audio interface appears but Jack does not work with it
Hey guys,
I got a new RC-300 Loop Station...Nice Looper!
But now I want to you use the Audio-interface of it and have some problems. If I do the following:
cat /proc/asound/cards /proc/asound/module
0 [VirMIDI ]: VirMIDI - VirMIDI
Virtual MIDI Card 1
1 [Loopback ]: Loopback - Loopback
Loopback 1
2 [HDMI ]: HDA-Intel - HDA Intel HDMI
HDA Intel HDMI at 0xf7b14000 irq 36
3 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xf7b10000 irq 35
4 [RC300 ]: USB-Audio - RC-300
BOSS RC-300 at usb-0000:00:14.0-2, high speed
The RC300 appears in Jack. But I can't get it as Audio-Source for Jack. Everytime when I select the RC300 as input jack crashes.
And also in my Patch-Bay the Audio Source/Sink of the RC300 does not appear....only the Midi is available
I took some screenshots for you in my Attachments, cause of my bad explanations
Maybe my configuration is totally wrong :-)Can somebody help me? I'm actually not a Ubuntu/Linux pro...
I got a new RC-300 Loop Station...Nice Looper!
But now I want to you use the Audio-interface of it and have some problems. If I do the following:
cat /proc/asound/cards /proc/asound/module
0 [VirMIDI ]: VirMIDI - VirMIDI
Virtual MIDI Card 1
1 [Loopback ]: Loopback - Loopback
Loopback 1
2 [HDMI ]: HDA-Intel - HDA Intel HDMI
HDA Intel HDMI at 0xf7b14000 irq 36
3 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xf7b10000 irq 35
4 [RC300 ]: USB-Audio - RC-300
BOSS RC-300 at usb-0000:00:14.0-2, high speed
The RC300 appears in Jack. But I can't get it as Audio-Source for Jack. Everytime when I select the RC300 as input jack crashes.
And also in my Patch-Bay the Audio Source/Sink of the RC300 does not appear....only the Midi is available
I took some screenshots for you in my Attachments, cause of my bad explanations
Maybe my configuration is totally wrong :-)Can somebody help me? I'm actually not a Ubuntu/Linux pro...
- Attachments
-
- Catia_PatchBay.png (246.69 KiB) Viewed 2079 times
-
- Screenshot_JackConfig.png (178.45 KiB) Viewed 2079 times
- English Guy
- Established Member
- Posts: 525
- Joined: Wed Oct 17, 2012 7:28 pm
- Location: England
- Has thanked: 8 times
- Been thanked: 7 times
Re: Boss RC-300 Audio interface appears but Jack does not work with it
Usually for USB set periods, buffer to 3.
Re: Boss RC-300 Audio interface appears but Jack does not work with it
thanks for your help.
But for me it didn't work. Jack is still crashing.
But for me it didn't work. Jack is still crashing.
- English Guy
- Established Member
- Posts: 525
- Joined: Wed Oct 17, 2012 7:28 pm
- Location: England
- Has thanked: 8 times
- Been thanked: 7 times
Re: Boss RC-300 Audio interface appears but Jack does not work with it
Force 16 bit is ticked, is that deliberate?
- English Guy
- Established Member
- Posts: 525
- Joined: Wed Oct 17, 2012 7:28 pm
- Location: England
- Has thanked: 8 times
- Been thanked: 7 times
Re: Boss RC-300 Audio interface appears but Jack does not work with it
Also I would set input and output device to none and choose your interface in the device/interface drop down list instead
Re: Boss RC-300 Audio interface appears but Jack does not work with it
Hi,
thanks for your help.
Actually I don't think that the Jack configuration is the problem.
I read something about a missing entry @ quirks-table.h but I don't think that this is my problem. Cause when i enter aplay -l my RC-300 is listet:
aplay -l
Maybe it's the same problem as in this topic....but there is no solution
viewtopic.php?f=4&t=16394&p=76258&hilit ... ace#p76258
now I've found something that could be the reason.
In this code, the USB-Adress of RC-300 is usb-0000:00:14.0-1. But in lsusb I have:
could this be the reason?
Has anybody an other idea?
thanks for your help.
Actually I don't think that the Jack configuration is the problem.
I read something about a missing entry @ quirks-table.h but I don't think that this is my problem. Cause when i enter aplay -l my RC-300 is listet:
aplay -l
Code: Select all
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 1: RC300 [RC-300], Gerät 0: USB Audio [USB Audio]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 2: HDMI [HDA Intel HDMI], Gerät 3: HDMI 0 [HDMI 0]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 2: HDMI [HDA Intel HDMI], Gerät 7: HDMI 1 [HDMI 1]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 2: HDMI [HDA Intel HDMI], Gerät 8: HDMI 2 [HDMI 2]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 3: PCH [HDA Intel PCH], Gerät 0: ALC892 Analog [ALC892 Analog]
Sub-Geräte: 0/1
Sub-Gerät #0: subdevice #0
Karte 3: PCH [HDA Intel PCH], Gerät 1: ALC892 Digital [ALC892 Digital]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 4: Loopback [Loopback], Gerät 0: Loopback PCM [Loopback PCM]
Sub-Geräte: 8/8
Sub-Gerät #0: subdevice #0
Sub-Gerät #1: subdevice #1
Sub-Gerät #2: subdevice #2
Sub-Gerät #3: subdevice #3
Sub-Gerät #4: subdevice #4
Sub-Gerät #5: subdevice #5
Sub-Gerät #6: subdevice #6
Sub-Gerät #7: subdevice #7
Karte 4: Loopback [Loopback], Gerät 1: Loopback PCM [Loopback PCM]
Sub-Geräte: 8/8
Sub-Gerät #0: subdevice #0
Sub-Gerät #1: subdevice #1
Sub-Gerät #2: subdevice #2
Sub-Gerät #3: subdevice #3
Sub-Gerät #4: subdevice #4
Sub-Gerät #5: subdevice #5
Sub-Gerät #6: subdevice #6
Sub-Gerät #7: subdevice #7
viewtopic.php?f=4&t=16394&p=76258&hilit ... ace#p76258
now I've found something that could be the reason.
Code: Select all
cat /proc/asound/cards
0 [VirMIDI ]: VirMIDI - VirMIDI
Virtual MIDI Card 1
1 [RC300 ]: USB-Audio - RC-300
BOSS RC-300 at usb-0000:00:14.0-1, high speed
2 [HDMI ]: HDA-Intel - HDA Intel HDMI
HDA Intel HDMI at 0xf7b14000 irq 36
3 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xf7b10000 irq 35
4 [Loopback ]: Loopback - Loopback
Loopback 1
Code: Select all
Bus 003 Device 008: ID 0582:0138 Roland Corp. Boss RC-300 (Audio mode)
Has anybody an other idea?
Re: Boss RC-300 Audio interface appears but Jack does not work with it
Looks like nobody has any idea....
Re: Boss RC-300 Audio interface appears but Jack does not work with it
Try starting jack from the command line with the default settings and look for relevant info in the terminal output
Code: Select all
jackd -dalsa -dhw:RC300
-
- Established Member
- Posts: 10
- Joined: Wed Jun 07, 2017 11:06 pm
Re: Boss RC-300 Audio interface appears but Jack does not work with it
i have exact same problem and will do whatever troubleshooting is needed to resolve the issue
if the original poster has given up.
here is lsusb -v (EDIT: forgot to run with sudo first time ;-P )
any input on this is highly appreciated !
Peace
if the original poster has given up.
here is my output from that commandTry starting jack from the command line with the default settings and look for relevant info in the terminal output
Code: Select all
Code: Select all jackd -dalsa -dhw:RC300
Code: Select all
$ jackd -dalsa -dhw:RC300
jackdmp 1.9.10
Copyright 2001-2005 Paul Davis and others.
Copyright 2004-2014 Grame.
jackdmp comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
no message buffer overruns
no message buffer overruns
no message buffer overruns
JACK server starting in realtime mode with priority 10
self-connect-mode is "Don't restrict self connect requests"
audio_reservation_init
Acquire audio card Audio1
creating alsa driver ... hw:RC300|hw:RC300|1024|2|48000|0|0|nomon|swmeter|-|32bit
configuring for 48000Hz, period = 1024 frames (21.3 ms), buffer = 2 periods
ALSA: final selected sample format for capture: 32bit integer little-endian
ALSA: use 2 periods for capture
ALSA: final selected sample format for playback: 32bit integer little-endian
ALSA: use 2 periods for playback
ALSA: poll time out, polled for 34828295 usecs
JackAudioDriver::ProcessAsync: read error, stopping...
Code: Select all
Bus 002 Device 006: ID 0582:0138 Roland Corp. Boss RC-300 (Audio mode)
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 0
bDeviceProtocol 255
bMaxPacketSize0 64
idVendor 0x0582 Roland Corp.
idProduct 0x0138 Boss RC-300 (Audio mode)
bcdDevice 0.00
iManufacturer 1 BOSS
iProduct 2 RC-300
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 176
bNumInterfaces 4
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 0
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 2
bInterfaceProtocol 2
iInterface 0
** UNRECOGNIZED: 06 24 f1 01 00 00
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 2
bInterfaceProtocol 2
iInterface 0
** UNRECOGNIZED: 07 24 01 01 00 01 00
** UNRECOGNIZED: 0b 24 02 01 02 04 18 01 44 ac 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x0d EP 13 OUT
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0038 1x 56 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 2
bInterfaceProtocol 1
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 2
bInterfaceProtocol 1
iInterface 0
** UNRECOGNIZED: 07 24 01 07 00 01 00
** UNRECOGNIZED: 0b 24 02 01 02 04 18 01 44 ac 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x8e EP 14 IN
bmAttributes 37
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Implicit feedback Data
wMaxPacketSize 0x0038 1x 56 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 3
bInterfaceProtocol 0
iInterface 0
** UNRECOGNIZED: 06 24 f1 02 01 01
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEcan't get debug descriptor: Resource temporarily unavailable
ndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 3
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 0
bDeviceProtocol 255
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 4.09
iManufacturer 3 Linux 4.9.30-1-lts ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1d.7
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 6
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x60
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
can't get device qualifier: Resource temporarily unavailable
can't get debug descriptor: Resource temporarily unavailable
can't get debug descriptor: Resource temporarily unavailable
Port 3: 0000.0100 power
Port 4: 0000.0503 highspeed power enable connect
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 4.09
iManufacturer 3 Linux 4.9.30-1-lts uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x06
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 4.09
iManufacturer 3 Linux 4.9.30-1-lts uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 millcan't get debug descriptor: Resource temporarily unavailable
can't get debug descriptor: Resource temporarily unavailable
i seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 4.09
iManufacturer 3 Linux 4.9.30-1-lts uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 4.09
iManufacturer 3 Linux 4.9.30-1-lts ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1a.7
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 6
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protecan't get device qualifier: Resource temporarily unavailable
can't get debug descriptor: Resource temporarily unavailable
can't get debug descriptor: Resource temporarily unavailable
ction
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x7c
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 005 Device 003: ID 0b97:7772 O2 Micro, Inc. OZ776 CCID Smartcard Reader
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0b97 O2 Micro, Inc.
idProduct 0x7772 OZ776 CCID Smartcard Reader
bcdDevice 1.10
iManufacturer 1 O2
iProduct 2 O2Micro CCID SC Reader
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 93
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 11 Chip/SmartCard
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0003 1x 3 bytes
bInterval 255
ChipCard Interface Descriptor:
bLength 54
bDescriptorType 33
bcdCCID 1.00
nMaxSlotIndex 0
bVoltageSupport 7 5.0V 3.0V 1.8V
dwProtocols 3 T=0 T=1
dwDefaultClock 4000
dwMaxiumumClock 4000
bNumClockSupported 0
dwDataRate 9600 bps
dwMaxDataRate 307200 bps
bNumDataRatesSupp. 0
dwMaxIFSD 254
dwSyncProtocols 00000000
dwMechanical 00000000
dwFeatures 00000030
Auto clock change
Auto baud rate change
dwMaxCCIDMsgLen 271
bClassGetResponse 00
bClassEnvelope 00
wlcdLayout none
bPINSupport 0
bMaxCCIDBusySlots 1
Device Status: 0x0001
Self Powered
Bus 005 Device 002: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 8
idVendor 0x0b97 O2 Micro, Inc.
idProduct 0x7761 Oz776 1.1 Hub
bcdDevice 1.10
iManufacturer 0
iProduct 0
iSecan't get debug descriptor: Resource temporarily unavailable
can't get debug descriptor: Resource temporarily unavailable
rial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 4
wHubCharacteristic 0x000d
Per-port power switching
Compound device
Per-port overcurrent protection
bPwrOn2PwrGood 50 * 2 milli seconds
bHubContrCurrent 100 milli Ampere
DeviceRemovable 0x04
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0103 power enable connect
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 4.09
iManufacturer 3 Linux 4.9.30-1-lts uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1a.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x06
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0103 power enable connect
Port 2: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 004 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 224 Wireless
bDeviceSubClass 1 Radio Frequency
bDeviceProtocol 1 Bluetooth
bMaxPacketSize0 64
idVendor 0x0a12 Cambridge Silicon Radio, Ltd
idProduct 0x0001 Bluetooth Dongle (HCI mode)
bcdDevice 48.39
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 177
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0009 1x 9 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0009 1x 9 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 2
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0011 1x 17 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0011 1x 17 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 3
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0019 1x 25 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0019 1x 25 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 4
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0021 1x 33 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0021 1x 33 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 5
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0031 can't get device qualifier: Resource temporarily unavailable
can't get debug descriptor: Resource temporarily unavailable
can't get debug descriptor: Resource temporarily unavailable
1x 49 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0031 1x 49 bytes
bInterval 1
Device Status: 0x0001
Self Powered
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 4.09
iManufacturer 3 Linux 4.9.30-1-lts uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1a.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x06
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0103 power enable connect
Device Status: 0x0001
Self Powered
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 4.09
iManufacturer 3 Linux 4.9.30-1-lts uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1a.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Dcan't get debug descriptor: Resource temporarily unavailable
ata
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x04
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0001
Self Powered
Peace
Last edited by digikwondo on Sat Jun 10, 2017 12:44 pm, edited 1 time in total.
- autostatic
- Established Member
- Posts: 1994
- Joined: Wed Dec 09, 2009 5:26 pm
- Location: Beverwijk, The Netherlands
- Has thanked: 32 times
- Been thanked: 104 times
- Contact:
Re: Boss RC-300 Audio interface appears but Jack does not work with it
Hello digikwondo, what system is that on? Which kernel version?
-
- Established Member
- Posts: 10
- Joined: Wed Jun 07, 2017 11:06 pm
Re: Boss RC-300 Audio interface appears but Jack does not work with it
AutoStatic wrote:Hello digikwondo, what system is that on? Which kernel version?
hello AutoStatic im on 4.9.30-1-lts
-
- Established Member
- Posts: 10
- Joined: Wed Jun 07, 2017 11:06 pm
Re: Boss RC-300 Audio interface appears but Jack does not work with it
arch linux , i might forgott to mention that
-
- Established Member
- Posts: 10
- Joined: Wed Jun 07, 2017 11:06 pm
Re: Boss RC-300 Audio interface appears but Jack does not work with it
so spent a bit more time investigating this, but first i want to admit im no real programmer or linux driver guru.
but i think i have found something. to keep things simple my aim is to simple stream from the RC-300 over
usb into my old trusty (and beer smelling) laptop where i record through ardour or audacity.
but my first test does not use jack at all. as per bellow screenshots just simply tried to rout the sound from my rc300 over usb and out into my connected creative bluetooth speakers.
i have tried both the analog and digital Boss options but no sound through my speakers.
digging arround in the /proc folder i found this
could the "Status: stop" be the cause here ?
bellow is some more info
i have never sued the windows driver for this thing but could it be that these is some
kind of software "switch" built into it that enables and disables (open/closes) the stream ports "pcm0p" and "pcm0c".
as im not an expert in any way i would appreciate if someone could tell me if im totaly wrong here.
as i dont want to go down the wrong rabbit hole
peace
digikwondo
but i think i have found something. to keep things simple my aim is to simple stream from the RC-300 over
usb into my old trusty (and beer smelling) laptop where i record through ardour or audacity.
but my first test does not use jack at all. as per bellow screenshots just simply tried to rout the sound from my rc300 over usb and out into my connected creative bluetooth speakers.
i have tried both the analog and digital Boss options but no sound through my speakers.
digging arround in the /proc folder i found this
Code: Select all
$cat /proc/asound/card1/stream0
BOSS RC-300 at usb-0000:00:1d.7-4, high speed : USB Audio
Playback:
Status: Stop
Interface 1
Altset 1
Format: S32_LE
Channels: 2
Endpoint: 13 OUT (ASYNC)
Rates: 44100
Data packet interval: 125 us
Capture:
Status: Stop
Interface 2
Altset 1
Format: S32_LE
Channels: 2
Endpoint: 14 IN (ASYNC)
Rates: 44100
Data packet interval: 125 us
bellow is some more info
Code: Select all
$cat /proc/asound/card1/pcm0p/sub0/status
closed
$cat /proc/asound/card1/pcm0p/sub0/sw_params
closed
$cat /proc/asound/card1/pcm0p/sub0/hw_params
closed
$cat /proc/asound/card1/pcm0p/sub0/info
card: 1
device: 0
subdevice: 0
stream: PLAYBACK
id: USB Audio
name: USB Audio
subname: subdevice #0
class: 0
subclass: 0
subdevices_count: 1
subdevices_avail: 1
$ls -halR /proc/asound/RC300/*
-r--r--r-- 1 root root 0 10 jun 11.19 /proc/asound/RC300/id
-r--r--r-- 1 root root 0 10 jun 11.19 /proc/asound/RC300/midi0
-r--r--r-- 1 root root 0 10 jun 11.19 /proc/asound/RC300/stream0
-r--r--r-- 1 root root 0 10 jun 11.19 /proc/asound/RC300/usbbus
-r--r--r-- 1 root root 0 10 jun 11.19 /proc/asound/RC300/usbid
/proc/asound/RC300/pcm0c:
totalt 0
dr-xr-xr-x 3 root root 0 10 jun 11.19 .
dr-xr-xr-x 4 root root 0 10 jun 11.19 ..
-r--r--r-- 1 root root 0 10 jun 11.19 info
dr-xr-xr-x 2 root root 0 10 jun 11.19 sub0
/proc/asound/RC300/pcm0c/sub0:
totalt 0
dr-xr-xr-x 2 root root 0 10 jun 11.19 .
dr-xr-xr-x 3 root root 0 10 jun 11.19 ..
-r--r--r-- 1 root root 0 10 jun 11.19 hw_params
-r--r--r-- 1 root root 0 10 jun 11.19 info
-r--r--r-- 1 root root 0 10 jun 11.19 status
-r--r--r-- 1 root root 0 10 jun 11.19 sw_params
/proc/asound/RC300/pcm0p:
totalt 0
dr-xr-xr-x 3 root root 0 10 jun 11.19 .
dr-xr-xr-x 4 root root 0 10 jun 11.19 ..
-r--r--r-- 1 root root 0 10 jun 11.19 info
dr-xr-xr-x 2 root root 0 10 jun 11.19 sub0
/proc/asound/RC300/pcm0p/sub0:
totalt 0
dr-xr-xr-x 2 root root 0 10 jun 11.19 .
dr-xr-xr-x 3 root root 0 10 jun 11.19 ..
-r--r--r-- 1 root root 0 10 jun 11.19 hw_params
-r--r--r-- 1 root root 0 10 jun 11.19 info
-r--r--r-- 1 root root 0 10 jun 11.19 status
-r--r--r-- 1 root root 0 10 jun 11.19 sw_params
kind of software "switch" built into it that enables and disables (open/closes) the stream ports "pcm0p" and "pcm0c".
as im not an expert in any way i would appreciate if someone could tell me if im totaly wrong here.
as i dont want to go down the wrong rabbit hole
peace
digikwondo
-
- Established Member
- Posts: 10
- Joined: Wed Jun 07, 2017 11:06 pm
Re: Boss RC-300 Audio interface appears but Jack does not work with it
maby this topic should be moved to viewforum.php?f=6 ?