Netjack with a ethernet crossover cable
Moderators: MattKingUSA, khz
Netjack with a ethernet crossover cable
something removed later
Last edited by studio32 on Mon Jul 27, 2020 4:28 am, edited 1 time in total.
-
- Established Member
- Posts: 2059
- Joined: Tue Feb 16, 2016 6:56 am
- Location: Kangasala, Finland
- Has thanked: 375 times
- Been thanked: 209 times
- Contact:
Re: Netjack with a ethernet crossover cable
Crossover cable is just way to implement your network. So for netjack, it does not matter is there crossover cable or both machines with normal cable connected to switch.
Linux veteran & Novice musician
Latest track: https://www.youtube.com/watch?v=ycVrgGtrBmM
Re: Netjack with a ethernet crossover cable
something removed later
Last edited by studio32 on Mon Jul 27, 2020 4:29 am, edited 1 time in total.
-
- Established Member
- Posts: 2059
- Joined: Tue Feb 16, 2016 6:56 am
- Location: Kangasala, Finland
- Has thanked: 375 times
- Been thanked: 209 times
- Contact:
Re: Netjack with a ethernet crossover cable
It has some advantages:
- Cheap, cheapest possible
- Full bandwith in use, because there is nobody else on same line distrubing
- Simple, no error prone electronics
- Cheap, cheapest possible
- Full bandwith in use, because there is nobody else on same line distrubing
- Simple, no error prone electronics
Linux veteran & Novice musician
Latest track: https://www.youtube.com/watch?v=ycVrgGtrBmM
Re: Netjack with a ethernet crossover cable
something removed later
Last edited by studio32 on Mon Jul 27, 2020 4:29 am, edited 1 time in total.
Re: Netjack with a ethernet crossover cable
Netjack2 works via wifi, but can't get it work with the crossover cable. Network is unreachable.
I was able to ping both manual ip addresses. (10.0.0.1 and 10.0.0.2)
edit: zita-j2n is working though using the crossover cable
I was able to ping both manual ip addresses. (10.0.0.1 and 10.0.0.2)
edit: zita-j2n is working though using the crossover cable
-
- Established Member
- Posts: 2059
- Joined: Tue Feb 16, 2016 6:56 am
- Location: Kangasala, Finland
- Has thanked: 375 times
- Been thanked: 209 times
- Contact:
Re: Netjack with a ethernet crossover cable
For netjack, you may need to configure it to use correct network. When you have more than one network connected, it maybe picks the one which is default?studio32 wrote:Netjack2 works via wifi, but can't get it work with the crossover cable. Network is unreachable.
I was able to ping both manual ip addresses. (10.0.0.1 and 10.0.0.2)
edit: zita-j2n is working though using the crossover cable
Linux veteran & Novice musician
Latest track: https://www.youtube.com/watch?v=ycVrgGtrBmM