KXStudio 10.04.2 is out!
Moderators: raboof, MattKingUSA, khz
-
- Established Member
- Posts: 3
- Joined: Tue Oct 26, 2010 1:48 am
Re: KXStudio 10.04.2 is out!
Should I wait for 'KXStudio 10.04.3' ?
10.04.2 Live is running quite fast on my system - so far everything I have tried is functional...including midi hardware w/ esi Juli@ card.
My plan is to just use KXStudio - upgrades are brutal sometimes tho - don't want to install .2 and have .3 visions at nite.
Thanks falkTX for this fine project you have endeavored !
10.04.2 Live is running quite fast on my system - so far everything I have tried is functional...including midi hardware w/ esi Juli@ card.
My plan is to just use KXStudio - upgrades are brutal sometimes tho - don't want to install .2 and have .3 visions at nite.
Thanks falkTX for this fine project you have endeavored !
asus Q6600 Quad Core 2.4 Ghz 4GB ram w/ esi Juli@ card
Midi
Hello,
It's just because I have no sound on Rosegarden, Kmid or Kmetronome...
I'm only musician, I like linux and use it always, but I have few Knowledge on informatics. I suppose it's easy to solve but I can't.
Great job, FalkTX, on Ubuntu Studio I was going crazy with sounds!
Any help?
PD: Someone has Kxstudio on a netbook? How is it?
Thanks a lot
It's just because I have no sound on Rosegarden, Kmid or Kmetronome...
I'm only musician, I like linux and use it always, but I have few Knowledge on informatics. I suppose it's easy to solve but I can't.
Great job, FalkTX, on Ubuntu Studio I was going crazy with sounds!
Any help?
PD: Someone has Kxstudio on a netbook? How is it?
Thanks a lot
Re: KXStudio 10.04.2 is out!
Hi Raul,
Rosegarden (and the other programs you mention but I know better rosegarden) is (mainly) a midi sequencer and it does not make sounds by itself. Their midi tracks need either an external synth (which can be either hardware or software) OR an instrument plugin.
Elaborating a bit: when you launch rosegarden for the first time, If you right click on a track you have three options:
1. General MIDI Device: This is a default name and it is used for external synths. In Studio -> Manage MIDI devices you can rename it and, above all, connect it to somewhere: Either the midi connection of your sond card if you plan to use a hard synth or the input of a soft synth such as qsynth or anything else.
2. Synth plugin: This is for dssi instruments and it is the easiest way to get sound from rosegarden. Push the button "No synth" and load a dssi plugin, such as hexter or anything.
3. Audio. This is for audio tracks. Not used in your case, I think.
Cheers! Pablo
Rosegarden (and the other programs you mention but I know better rosegarden) is (mainly) a midi sequencer and it does not make sounds by itself. Their midi tracks need either an external synth (which can be either hardware or software) OR an instrument plugin.
Elaborating a bit: when you launch rosegarden for the first time, If you right click on a track you have three options:
1. General MIDI Device: This is a default name and it is used for external synths. In Studio -> Manage MIDI devices you can rename it and, above all, connect it to somewhere: Either the midi connection of your sond card if you plan to use a hard synth or the input of a soft synth such as qsynth or anything else.
2. Synth plugin: This is for dssi instruments and it is the easiest way to get sound from rosegarden. Push the button "No synth" and load a dssi plugin, such as hexter or anything.
3. Audio. This is for audio tracks. Not used in your case, I think.
Cheers! Pablo
Midi
Thanks Pablo!
I've tried, no results, but in Kinfo centre I've found this:
Synth devices: NOT ENABLED IN CONFIG
Midi devices: NOT ENABLED IN CONFIG
Also,
On Qsynth, I have no Soundfounts... there is no sound. It's supposed that I have sound fonts somewhere on the computer?
I will use internal midi devices.
Thanks and apologizes because of my ignorance.
PD: In case that someone wants only hear a .mid file, is it possible to do this just on a media player (as on Windows with Windows media player)?
I've tried, no results, but in Kinfo centre I've found this:
Synth devices: NOT ENABLED IN CONFIG
Midi devices: NOT ENABLED IN CONFIG
Also,
On Qsynth, I have no Soundfounts... there is no sound. It's supposed that I have sound fonts somewhere on the computer?
I will use internal midi devices.
Thanks and apologizes because of my ignorance.
PD: In case that someone wants only hear a .mid file, is it possible to do this just on a media player (as on Windows with Windows media player)?
Re: KXStudio 10.04.2 is out!
Install the package "fluid-soundfont-gm" if you don't have it installed. In qsynth, load "FluidR3_GM.sf2" which is located in /usr/share/sounds/sf2/On Qsynth, I have no Soundfounts... there is no sound. It's supposed that I have sound fonts somewhere on the computer?
You can get more soundfonts from the internet.
I am not sure about the othe questions. I never use a general multimedia player to play midi files and I don't use KDE.
Cheers! Pablo
Midi
Yes! Now it works, thank you very much
Why VLC Media Player, e.g.., can play midi files on Windows and not in Linux? Is it?In case that someone wants only hear a .mid file, is it possible to do this just on a media player (as on Windows with Windows media player)?
Re: KXStudio 10.04.2 is out!
It is not exactly so, but anyway, here is a good explanation: http://ubuntuforums.org/showthread.php?t=1561490Why VLC Media Player, e.g.., can play midi files on Windows and not in Linux?
It could be that vlc in KXstudio is ready to play midi files, but I don't know for sure.
Cheers! Pablo
Re: KXStudio 10.04.2 is out!
Great work, FalkTX!
But now I've a little problem. Since last update the graphical driver doesn't work. Here the output:
If you don't understand the german parts, say it, and I try to translate.
I hope, you can help.
regards tubifex
But now I've a little problem. Since last update the graphical driver doesn't work. Here the output:
Code: Select all
$ sudo dpkg --configure -a
Richte fglrx ein (2:8.783-0ubuntu1+rt1) ...
update-initramfs: deferring update (trigger activated)
Removing old fglrx-8.783 DKMS files...
------------------------------
Deleting module version: 8.783
completely from the DKMS tree.
------------------------------
Done.
Loading new fglrx-8.783 DKMS files...
First Installation: checking all kernels...
Building only for 2.6.33-29-realtime
Building for architecture x86_64
Building initial module for 2.6.33-29-realtime
Error! Application of patch rt_preempt_33.patch failed.
Check /var/lib/dkms/fglrx/8.783/build/ for more information.
dpkg: Fehler beim Bearbeiten von fglrx (--configure):
Unterprozess installiertes post-installation-Skript gab den Fehlerwert 6 zurück
dpkg: Abhängigkeitsprobleme verhindern Konfiguration von fglrx-amdcccle:
fglrx-amdcccle hängt ab von fglrx; aber:
Paket fglrx ist noch nicht konfiguriert.
dpkg: Fehler beim Bearbeiten von fglrx-amdcccle (--configure):
Abhängigkeitsprobleme - lasse es unkonfiguriert
Richte linux-image-2.6.33-29-realtime ein (2.6.33-29.1) ...
Running depmod.
update-initramfs: Generating /boot/initrd.img-2.6.33-29-realtime
Not updating initrd symbolic links since we are being updated/reinstalled
(2.6.33-29.1 was configured last, according to dpkg)
Not updating image symbolic links since we are being updated/reinstalled
(2.6.33-29.1 was configured last, according to dpkg)
Running postinst hook script /usr/sbin/update-grub.
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-2.6.33-29-realtime
Found initrd image: /boot/initrd.img-2.6.33-29-realtime
Found linux image: /boot/vmlinuz-2.6.32-24-lowlatency
Found initrd image: /boot/initrd.img-2.6.32-24-lowlatency
Found memtest86+ image: /boot/memtest86+.bin
Found Ubuntu 10.04.1 LTS (10.04) on /dev/sda3
done
Examining /etc/kernel/postinst.d.
run-parts: executing /etc/kernel/postinst.d/dkms 2.6.33-29-realtime /boot/vmlinuz-2.6.33-29-realtime
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 2.6.33-29-realtime /boot/vmlinuz-2.6.33-29-realtime
run-parts: executing /etc/kernel/postinst.d/nvidia-common 2.6.33-29-realtime /boot/vmlinuz-2.6.33-29-realtime
run-parts: /etc/kernel/postinst.d/nvidia-common exited with return code 10
Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/linux-image-2.6.33-29-realtime.postinst line 1003.
dpkg: Fehler beim Bearbeiten von linux-image-2.6.33-29-realtime (--configure):
Unterprozess installiertes post-installation-Skript gab den Fehlerwert 2 zurück
dpkg: Abhängigkeitsprobleme verhindern Konfiguration von linux-image-realtime:
linux-image-realtime hängt ab von linux-image-2.6.33-29-realtime; aber:
Paket linux-image-2.6.33-29-realtime ist noch nicht konfiguriert.
dpkg: Fehler beim Bearbeiten von linux-image-realtime (--configure):
Abhängigkeitsprobleme - lasse es unkonfiguriert
dpkg: Abhängigkeitsprobleme verhindern Konfiguration von linux-realtime:
linux-realtime hängt ab von linux-image-realtime (= 2.6.33.29.1); aber:
Paket linux-image-realtime ist noch nicht konfiguriert.
dpkg: Fehler beim Bearbeiten von linux-realtime (--configure):
Abhängigkeitsprobleme - lasse es unkonfiguriert
dpkg: Abhängigkeitsprobleme verhindern Konfiguration von kxstudio-kernel-realtime-33:
kxstudio-kernel-realtime-33 hängt ab von linux-realtime; aber:
Paket linux-realtime ist noch nicht konfiguriert.
dpkg: Fehler beim Bearbeiten von kxstudio-kernel-realtime-33 (--configure):
Abhängigkeitsprobleme - lasse es unkonfiguriert
dpkg: Abhängigkeitsprobleme verhindern Konfiguration von kxstudio-kernel-realtime:
kxstudio-kernel-realtime hängt ab von kxstudio-kernel-realtime-33 | kxstudio-kernel-realtime-31; aber:
Paket kxstudio-kernel-realtime-33 ist noch nicht konfiguriert.
Paket kxstudio-kernel-realtime-31 ist nicht installiert.
dpkg: Fehler beim Bearbeiten von kxstudio-kernel-realtime (--configure):
Abhängigkeitsprobleme - lasse es unkonfiguriert
Verarbeite Trigger für python-gmenu ...
Rebuilding /usr/share/applications/desktop.de_DE.utf8.cache...
Verarbeite Trigger für initramfs-tools ...
update-initramfs: Generating /boot/initrd.img-2.6.33-29-realtime
Verarbeite Trigger für python-support ...
Fehler traten auf beim Bearbeiten von:
fglrx
fglrx-amdcccle
linux-image-2.6.33-29-realtime
linux-image-realtime
linux-realtime
kxstudio-kernel-realtime-33
kxstudio-kernel-realtime
$ uname -r
2.6.33-29-realtime
I hope, you can help.
regards tubifex
Re: KXStudio 10.04.2 is out!
I tried to install a package called 3gpwiz, which pulled in a bunch of QT dependencies. It failed to fully install and now I am stuck. KDE programs won't launch and I can't install or uninstall anything. How can I resolve this? It looks like a hiccup between your PPA and the regular Ubuntu packages.
Thanks,
Brian
brian@defiant:~$ sudo apt-get install -f
Reading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies... Done
The following extra packages will be installed:
libqt4-assistant libqt4-declarative libqt4-help libqt4-network libqt4-opengl libqt4-svg libqt4-test libqt4-xmlpatterns libqtassistantclient4 libqtcore4 libqtgui4
libqtwebkit-dev libqtwebkit4 qt4-qmake
Suggested packages:
qt4-qtconfig
The following packages will be REMOVED:
libqt4-multimedia
The following NEW packages will be installed:
libqt4-declarative libqtassistantclient4 libqtwebkit-dev libqtwebkit4
The following packages will be upgraded:
libqt4-assistant libqt4-help libqt4-network libqt4-opengl libqt4-svg libqt4-test libqt4-xmlpatterns libqtcore4 libqtgui4 qt4-qmake
10 upgraded, 4 newly installed, 1 to remove and 224 not upgraded.
19 not fully installed or removed.
Need to get 0B/15.4MB of archives.
After this operation, 23.7MB of additional disk space will be used.
Do you want to continue [Y/n]? Y
(Reading database ... 315880 files and directories currently installed.)
Preparing to replace libqt4-help 4:4.6.3-0ubuntu1 (using .../libqt4-help_4%3a4.7.0-0ubuntu2~lucid1~ppa1_i386.deb) ...
Unpacking replacement libqt4-help ...
dpkg: error processing /var/cache/apt/archives/libqt4-help_4%3a4.7.0-0ubuntu2~lucid1~ppa1_i386.deb (--unpack):
trying to overwrite '/usr/share/qt4/translations/qt_help_cs.qm', which is also in package libqtcore4 4:4.6.3-0ubuntu1
Errors were encountered while processing:
/var/cache/apt/archives/libqt4-help_4%3a4.7.0-0ubuntu2~lucid1~ppa1_i386.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
brian@defiant:~$
Thanks,
Brian
brian@defiant:~$ sudo apt-get install -f
Reading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies... Done
The following extra packages will be installed:
libqt4-assistant libqt4-declarative libqt4-help libqt4-network libqt4-opengl libqt4-svg libqt4-test libqt4-xmlpatterns libqtassistantclient4 libqtcore4 libqtgui4
libqtwebkit-dev libqtwebkit4 qt4-qmake
Suggested packages:
qt4-qtconfig
The following packages will be REMOVED:
libqt4-multimedia
The following NEW packages will be installed:
libqt4-declarative libqtassistantclient4 libqtwebkit-dev libqtwebkit4
The following packages will be upgraded:
libqt4-assistant libqt4-help libqt4-network libqt4-opengl libqt4-svg libqt4-test libqt4-xmlpatterns libqtcore4 libqtgui4 qt4-qmake
10 upgraded, 4 newly installed, 1 to remove and 224 not upgraded.
19 not fully installed or removed.
Need to get 0B/15.4MB of archives.
After this operation, 23.7MB of additional disk space will be used.
Do you want to continue [Y/n]? Y
(Reading database ... 315880 files and directories currently installed.)
Preparing to replace libqt4-help 4:4.6.3-0ubuntu1 (using .../libqt4-help_4%3a4.7.0-0ubuntu2~lucid1~ppa1_i386.deb) ...
Unpacking replacement libqt4-help ...
dpkg: error processing /var/cache/apt/archives/libqt4-help_4%3a4.7.0-0ubuntu2~lucid1~ppa1_i386.deb (--unpack):
trying to overwrite '/usr/share/qt4/translations/qt_help_cs.qm', which is also in package libqtcore4 4:4.6.3-0ubuntu1
Errors were encountered while processing:
/var/cache/apt/archives/libqt4-help_4%3a4.7.0-0ubuntu2~lucid1~ppa1_i386.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
brian@defiant:~$
Errors since upgrade to 10.04.3 or it's me?
Hello,
Gtklick worked properly before, but since Kxstudio 10.4.3 upgrade I have this message: Gtklick error: "timeout while waiting for klick to start" and nothing happens.
Now I've tryied to use kmetronome and when open Qsynth I've got this error message:
"Qsynth1: Failed to create the audio driver (jack).
Cannot continue without it".
Some help, please?
Gtklick worked properly before, but since Kxstudio 10.4.3 upgrade I have this message: Gtklick error: "timeout while waiting for klick to start" and nothing happens.
Now I've tryied to use kmetronome and when open Qsynth I've got this error message:
"Qsynth1: Failed to create the audio driver (jack).
Cannot continue without it".
Some help, please?
Re: KXStudio 10.04.2 is out!
Hello, today, after an update, Qsynth and gtklick works nice!
Updated: jack2-simple-config
Updated: jack2-simple-config
Re: jack connection refused
thank you thank you thank you. it finally works. in case others are reading. open Jack (it should open "stopped"). goto setup. change periods/buffer from 3 to 2. hit ok. press start on jack control. if it stays running, your good.