AV Linux 2020.1.14 Release Candidate for testing only

Discuss anything new and newsworthy! See http://planet.linuxaudio.org for more Linux Audio News!

Announcements of proprietary software may fit better in the Marketplace.

Moderators: raboof, MattKingUSA, khz

User avatar
GMaq
Established Member
Posts: 1478
Joined: Fri Sep 25, 2009 1:42 pm

Re: AV Linux 2020.1.14 Release Candidate for testing only

Post by GMaq »

@thetotalchaos

Thanks very much for taking the time to check that out and reply with your findings! There have been a lot more fixes and improvements and I'm hoping to upload another RC soon to find any last issues before the final release..

Rodney
Established Member
Posts: 52
Joined: Mon May 28, 2018 3:56 pm

Re: AV Linux 2020.1.14 Release Candidate for testing only

Post by Rodney »

Meanwhile the RC2 is not out, I recorded this attempt of simulating the JCM 800 using guitarix plugins with Avlinux RC1. https://drive.google.com/open?id=1kyfev ... EyvMeYI5RN sounds and feels great to me :D . Can´t wait for the final release with the new kernel by trulan. THat will be wild!

THanks a lot again Glenn!

PS: I looked again but I couldn´t find linvst.so unfortunately, I don´t why it´s not at /usr/local/lib/vst. I´ll just wait for RC2 to see if it´s there.

Att.: Rodney

GordonS
Established Member
Posts: 29
Joined: Tue Dec 04, 2012 6:13 pm

Re: AV Linux 2020.1.14 Release Candidate for testing only

Post by GordonS »

GMaq wrote:
GordonS wrote:This is regarding supported hardware and is off topic here really, but I should post somewhere.

I use AVLinux with a touch-screen and a SoundCraft Ui24R and the combination all seems to work pretty flawlesly, subject too the screen being only single-touch.

The Ui24R works beautifully as a mixer for live work and also includes raw recording to USB drive (and possibly to a DAW, I think), so that I can record performances and then later mix-down using Mixbus. It works as a generic USB audio device, so just drops neatly into AVL via Jack, so I can also use it as a soundcard

I've been delighted with the whole setup.

Gordon.
Hi Gordon!

Nice to hear from you, glad you've got a setup that is working well. Can you tell me what the make and model of screen you're using is? I don't know of anyone using AVL in this way.

Thanks, Glen
Hi Glen,

Yes, of course. It's an IIyama ProLite T2452MTS, which I've owned for a few years now. The touch-screen part plugs into a USB port and works like a mouse. Touch accuracy might be a tiny bit out, but I just became used to it. It's only maybe 1/8 inch at the screen extremities may actually be more to do with my large fingers than the screen itself. These days I use my pinky in the corners and things feel OK.

Occasionally I forget the limitation and try to move faders on the Ui24R in pairs. I very quickly remember ... Doh! :-)

korakios
Established Member
Posts: 85
Joined: Thu Feb 14, 2013 6:00 pm

Re: AV Linux 2020.1.14 Release Candidate for testing only

Post by korakios »

I tried to download twice ,to test in Virtualbox and couldn't install (systemback error) ,plus it was very slow.
Fortunately didn't spend much time because I checked the hash of the download and doesn't much .
Could you check it Glen ,or someone else plz?

MrEen
Posts: 1
Joined: Sun Apr 01, 2018 2:57 am

Re: AV Linux 2020.1.14 Release Candidate for testing only

Post by MrEen »

Hi korakios.

I just downloaded the ISO and the sha256 matched. Maybe you're having Internet hiccups?

korakios
Established Member
Posts: 85
Joined: Thu Feb 14, 2013 6:00 pm

Re: AV Linux 2020.1.14 Release Candidate for testing only

Post by korakios »

MrEen wrote:
Wed Mar 04, 2020 3:31 am
Hi korakios.

I just downloaded the ISO and the sha256 matched. Maybe you're having Internet hiccups?
Maybe, because today I tried again and it's ok now :)

Edit: It seems impossible to boot with UEFI in both hardware and virtualbox :(

User avatar
GMaq
Established Member
Posts: 1478
Joined: Fri Sep 25, 2009 1:42 pm

Re: AV Linux 2020.1.14 Release Candidate for testing only

Post by GMaq »

korakios wrote:
Wed Mar 04, 2020 4:15 pm
MrEen wrote:
Wed Mar 04, 2020 3:31 am
Hi korakios.

I just downloaded the ISO and the sha256 matched. Maybe you're having Internet hiccups?
Maybe, because today I tried again and it's ok now :)

Edit: It seems impossible to boot with UEFI in both hardware and virtualbox :(
Hi,

I just built a brand new computer and the ISO boots in UEFI from Unetbootin and an install from the ISO booted up no problems with the default Gigabyte UEFI Utility settings... This is the first time I ever tried an AV Linux ISO on a new UEFI computer so I can say at least some UEFI machines work.. To be fair I haven't tried in my Virtualbox UEFI VM yet..

Do you have any error messages or anything to provide a clue to what is going on?

BTW a lot of things have been fixed and improved since RC-1, I have made no changes to Systemback or any of it's dependencies.

korakios
Established Member
Posts: 85
Joined: Thu Feb 14, 2013 6:00 pm

Re: AV Linux 2020.1.14 Release Candidate for testing only

Post by korakios »

I tried to use dd for quick creating a usb live ,but my machine didn't like it.
Unetbootin works :)

Post Reply