Guitarix 0.35.0 released
Moderators: raboof, MattKingUSA, khz
-
- Established Member
- Posts: 2348
- Joined: Mon Jul 01, 2013 8:13 am
- Has thanked: 9 times
- Been thanked: 468 times
Guitarix 0.35.0 released
The Guitarix developers proudly present
Guitarix release 0.35.0
Guitarix is a tube amplifier simulation for
jack (Linux), with an additional mono and a stereo effect rack.
Guitarix includes a large list of plugins[*] and support LADSPA / LV2 plugs as well.
The guitarix engine is designed for LIVE usage, and feature ultra fast, glitch and click free, preset switching, full Midi and/or remote controllable (Web UI not included in the distributed tar ball).
This release introduce the new GUI design by Markus Schmidt aka. boomshop
Beside that, it comes with a couple of fixes and some new plugins.
Also included be the MOD UI's for the LV2 plugins used by the MOD[*]
For all changes, please check out the changelog.
Please refer to our project page for more information:
http://guitarix.sourceforge.net/
Download Site:
http://sourceforge.net/projects/guitarix/
Forum:
http://guitarix.sourceforge.net/forum/
Please consider visiting our forum or leaving a message on
guitarix-developer@lists.sourceforge.net <mailto:guitarix-developer@lists.sourceforge.net>
regards
hermann
[*] http://moddevices.com/
Guitarix release 0.35.0
Guitarix is a tube amplifier simulation for
jack (Linux), with an additional mono and a stereo effect rack.
Guitarix includes a large list of plugins[*] and support LADSPA / LV2 plugs as well.
The guitarix engine is designed for LIVE usage, and feature ultra fast, glitch and click free, preset switching, full Midi and/or remote controllable (Web UI not included in the distributed tar ball).
This release introduce the new GUI design by Markus Schmidt aka. boomshop
Beside that, it comes with a couple of fixes and some new plugins.
Also included be the MOD UI's for the LV2 plugins used by the MOD[*]
For all changes, please check out the changelog.
Please refer to our project page for more information:
http://guitarix.sourceforge.net/
Download Site:
http://sourceforge.net/projects/guitarix/
Forum:
http://guitarix.sourceforge.net/forum/
Please consider visiting our forum or leaving a message on
guitarix-developer@lists.sourceforge.net <mailto:guitarix-developer@lists.sourceforge.net>
regards
hermann
[*] http://moddevices.com/
On the road again.
- magicalex
- Established Member
- Posts: 193
- Joined: Sun Jan 24, 2016 6:34 pm
- Has thanked: 132 times
- Been thanked: 7 times
- Contact:
Re: Guitarix 0.35.0 released
Great news! I've been using the git version for the last week and the GUI is really beautiful. Brilliant work. Thank you!
Various Guitarix bits and pieces here: https://youtube.com/playlist?list=PLt_SkqlUjG1LSjcd2SfTIjE1c24OLw7GA
Re: Guitarix 0.35.0 released
Just home from playing a church-gig, with Guitarix up and running of course: I got comments how good my instrument sounded.
So thank you Guitarix-team!
Hans
So thank you Guitarix-team!
Hans
The Quintar Project:
- Popularizing an all fifths tuning for guitarlike instruments
- Youtube: Playing and Building
- Files: Sourceforge
- Popularizing an all fifths tuning for guitarlike instruments
- Youtube: Playing and Building
- Files: Sourceforge
-
- Established Member
- Posts: 564
- Joined: Thu Mar 12, 2015 8:41 am
- Has thanked: 44 times
- Been thanked: 8 times
-
- Established Member
- Posts: 821
- Joined: Thu Mar 21, 2013 12:55 am
- Location: Vladivostok
- Has thanked: 65 times
- Been thanked: 124 times
Re: Guitarix 0.35.0 released
New gui is great.
Sadly, I stuck in build with --faust :
Sadly, I stuck in build with --faust :
I suggest my faust installation is broken or dmth else.....
../src/faust/impulseresponse.dsp parameters in faust dsp not used in ../src/faust/impulseresponse_ui.glade: 0x00.peak, 0x00.freq, 0x00.auto_freq, 0x00.bandwidth
../src/faust/impulseresponse.dsp:error: parameters in ../src/faust/impulseresponse_ui.glade not found in faust dsp: IR.bandwidth, IR.freq, IR.auto_freq, IR.peak
../src/faust/compressor.dsp parameters in faust dsp not used in ../src/faust/compressor_ui.glade: 0x00.threshold, 0x00.knee, 0x00.ratio, 0x00.v1, 0x00.release, 0x00.attack
...
-
- Established Member
- Posts: 2348
- Joined: Mon Jul 01, 2013 8:13 am
- Has thanked: 9 times
- Been thanked: 468 times
Re: Guitarix 0.35.0 released
Properly not, the --faust flag in guitarix configure is a plain developers flag, it's meant to try if a updated faust version works with the guitarix build scripts. The last known version which works with guitarix is faust-0.9.65.Kott wrote:I suggest my faust installation is broken or dmth else.
guitarix build will use faust automatically when a usable faust version is found, otherwise we provide the pre-generated files, so no faust is needed to build guitarix.
regards
hermann
On the road again.
-
- Established Member
- Posts: 2348
- Joined: Mon Jul 01, 2013 8:13 am
- Has thanked: 9 times
- Been thanked: 468 times
Re: Guitarix 0.35.0 released
Hi
I've just prepared our sources so that you could use now also faust-0.9.73 to regenerate the faust sources.
True, you've to build from git then.
regards
hermann
I've just prepared our sources so that you could use now also faust-0.9.73 to regenerate the faust sources.
True, you've to build from git then.
regards
hermann
On the road again.
-
- Established Member
- Posts: 564
- Joined: Thu Mar 12, 2015 8:41 am
- Has thanked: 44 times
- Been thanked: 8 times
Re: Guitarix 0.35.0 released
Just made a quick try on Arch with Faust 0.9.73 from AUR, and it apparently has problems with the syntax:
Code: Select all
Waf: Entering directory `/home/gimmeapill/Software/AUR/guitarix-git/src/guitarix/trunk/build'
[ 173/1034] dsp: src/faust/jconv_post_mono.dsp -> build/default/src/faust/jconv_post_mono.cc build/default/src/faust/jconv_post_mono.h
[ 174/1034] dsp: src/faust/presence_level.dsp -> build/default/src/faust/presence_level.cc build/default/src/faust/presence_level.h
[ 175/1034] dsp: src/faust/cabinet_impulse_former.dsp -> build/default/src/faust/cabinet_impulse_former.cc build/default/src/faust/cabinet_impulse_former.h
[ 176/1034] dsp: src/faust/preamp_impulse_former.dsp -> build/default/src/faust/preamp_impulse_former.cc build/default/src/faust/preamp_impulse_former.h
File "../tools/dsp2cc", line 308
print self.toplevel
File "../tools/dsp2cc", line 308
print self.toplevel
^
SyntaxError: Missing parentheses in call to 'print'
^
SyntaxError: Missing parentheses in call to 'print'
File "../tools/dsp2cc", line 308
File "../tools/dsp2cc", line 308
print self.toplevel
^
print self.toplevel
SyntaxError: Missing parentheses in call to 'print'
^
SyntaxError: Missing parentheses in call to 'print'
Waf: Leaving directory `/home/gimmeapill/Software/AUR/guitarix-git/src/guitarix/trunk/build'
Build failed:
-> task failed (err #1):
{task: dsp presence_level.dsp -> presence_level.cc,presence_level.h}
-> task failed (err #1):
{task: dsp jconv_post_mono.dsp -> jconv_post_mono.cc,jconv_post_mono.h}
-> task failed (err #1):
{task: dsp preamp_impulse_former.dsp -> preamp_impulse_former.cc,preamp_impulse_former.h}
-> task failed (err #1):
{task: dsp cabinet_impulse_former.dsp -> cabinet_impulse_former.cc,cabinet_impulse_former.h}
==> ERROR: A failure occurred in build().
Aborting...
-
- Established Member
- Posts: 2348
- Joined: Mon Jul 01, 2013 8:13 am
- Has thanked: 9 times
- Been thanked: 468 times
Re: Guitarix 0.35.0 released
Still you need to use python2.
This is a error message from python3
regards
hermann
This is a error message from python3
However, thanks for reporting, as this print stance is a relict from a debugging session which I've forgotten to remove, I've removed it now.gimmeapill wrote:SyntaxError: Missing parentheses in call to 'print'
regards
hermann
On the road again.