[solved] Hydrogen : post-fader outputs don't work

Support & discussion regarding DAWs and MIDI sequencers.

Moderators: khz, MattKingUSA

Post Reply
juki
Established Member
Posts: 67
Joined: Sun Mar 29, 2009 10:45 pm

[solved] Hydrogen : post-fader outputs don't work

Post by juki »

Hi. I use Hydrogen 0.9.6 on Debian Jessie with KXStudio repos.

I want to set the outputs on post-fader, but it's impossible. Each time it's coming back to the pre-fader setting.

I saw the same problem here :

https://bugs.launchpad.net/ubuntu/+sour ... bug/559586

But no solution is given. Any idea ?
Last edited by juki on Fri Mar 06, 2015 5:06 pm, edited 1 time in total.

juki
Established Member
Posts: 67
Joined: Sun Mar 29, 2009 10:45 pm

Re: Hydrogen : post-fader outputs don't work

Post by juki »

Nobody else using Hydrogen on Debian Jessie ? Am i the only one to have this problem ?

juki
Established Member
Posts: 67
Joined: Sun Mar 29, 2009 10:45 pm

Re: Hydrogen : post-fader outputs don't work

Post by juki »

I already did. :(

juki
Established Member
Posts: 67
Joined: Sun Mar 29, 2009 10:45 pm

Re: Hydrogen : post-fader outputs don't work

Post by juki »

And i did well cause you were right, I had an answer from Mauser :
This is a bug :) Can you try the following: Start hydrogen from commandline with "LANG=EN hydrogen". This sets the language to english. I think we're checking the string in the combo box against the string "Post-Fader", not the locally translated version of "Post-Fader".
And it works indeed. Problem solved. :)

oosathiray
Posts: 1
Joined: Fri Mar 06, 2015 12:33 pm

Re: Hydrogen : post-fader outputs don't work

Post by oosathiray »

the program jack_midi_dump is installed with jack and just puts all midi message to you console, once you connect the jack port.
_____________________
You can try out our Testking network+ certification and latest testking to get high gre test in final passguide and pittstate exams. Our Northwood University is also very useful tool.

Post Reply