LinuxMusicians

I'd suggest trying the GUI https://github.com/geoffreybennett/alsa-scarlett-gui to see if you can make it work that way. First off, THANK YOU!! For all the work you have done and continue to do, many of us would be lost without it. I run bullseye and, not wishing to upend my entire system for the s...

I would also suggest to start JACK with an higher RT priority (not too high!!!) like 50 or 60. Jack is being started with RT priority of 60 already :/ ALso have audio group given unlimited memlock and rt prior max of 85 in /etc/security/limits.conf If you have built in motherboard sound you could t...

I've got a Ryzen 3900x and my system is working well. I got it earlier this year and over the time I've had it the performance has improved. My explanation is that it's kernel updates and updates to amd-ucode . The 3900x came out in 2019. That implies it has taken the Linux kernel two years to full...

One thing I "discovered" recently to drastically reduce Xruns on my system is having Hyperthreading (aka SMT in kernel speaking) disabled. If your system uses it you can disable it: In the BIOS, look for Hyperthreading options in your CPU settings or At boot adding "nosmt" to th...

Your computer is certainly fast enough. You can get pretty decent latency out of a Raspberry Pi. If you are using an USB interface try another port. My Scarlett Solo works without xruns connected as a single device connected to USB 2.0 hub, but not on an USB 3 hub for some reason. Maybe some IRQ is...

I'm having very intrusive consistent xruns. ~50 over a couple minutes of playing back a simple loop. I have a very beefy build. 5900x and 32gb of ram at 3600mhz, which should be more than capable of playing back a single loop without xruns. I also have very generous jack settings. 48khz sample size,...

- Is a GUI planned for this sound-card, i mean like the Focusrite Control Center, for a more user-friendly management than the raw alsa mixer and the thousands of faders. ? I know how to use Qt kinda well and i might be able to recreate the same GUI as the original control software, but idk how to ...