LinuxMusicians

How do you deal with that ? I put something like this in autostart or run it with qjackctl just before I start jack: #!/bin/bash if [ $(curl -s 192.168.1.xx/datastore/ext/configuredRate| jq '.value') != 44100 ]; then curl --data 'json={"value":44100}' 192.168.1.xx/datastore/avb/0001f2fffe011ff4/cfg...

Unfortunately after starting jackd the Ultralite forgets my enabled EQ in the mixer. AFAIR, it's better to set the sample-rate in a script as well, since the interface keeps it's settings/presets somehow sample-rate specific. For me, the Interface changes samplerate to 192kHz when booting up a USB-...

v1.3.5+626 is out. http://motu.com/techsupport/technotes/firmwarechangelog/ Implemented low bandwidth mode when both computer input and output channel count is set to 32 or lower. This will help USB compatibility with x99 chipset based systems. Hope that it solves something even without using x99 ch...

The delay when switching samplerates seems to be manly due to the internal mixer reinitialization taking so long, so AVB won't help here. I had the hope that the interface handles it's own settings different when used with AVB. I'm wondering if there's anything in the AVB-spec which deals with samp...

Started development of an AVB driver for my intel i210 ethernet controller. Today i was successfully playing/recording my first 8 in/ 8 out AVB stream with my 16A. :D Cool. I've compiled your patches in already, just have to find the time to update the interface to 1.3+ and try it out. Any chance t...

I just had a peek at http://motu.com/avb/index.html#avb-down ... -resources and saw that MOTU downgraded the "latest" firmware on that site to 1.2.9+479.
http://motu.com/techsupport/technotes/f ... changelog/ still shows the 1.3+ firmwares...

Also, can anyone explain what exactly the host safety buffer is? Does it have to be related to the buffer size set in jack, or is it completely independent? https://cdn-data.motu.com/manuals/avb/MOTU%20Pro%20Audio%20Driver%20Read%20Me.pdf This setting allows you to fine tune host latency. Larger of...

https://www.gearslutz.com/board/music-computers/943494-motu-1248-8m-16a-thunderbolt-interface-87.html Originally Posted by Rafter Man There's a new update available. 1.2.7, but it appears the only changes are for Windows users adding the "Host Safety Offset" setting, aka USB Streaming Mode. Why onl...

Looking at this thread http://www.motunation.com/forum/viewtopic.php?f=14&t=65037 , there might even be other layers of problems or misconfigurations, like powersaving in particular, even on windows. Have you guys with the new firmware tried setting (usb host controllers) tunables of powertop to "ba...

Just found out that I can switch the web interface into a mode where I can adjust the host buffer size and host safety offset. Via JSON, there are parameters like: "host/os":"mac", "host/win/buffer_sizes_1x":"16:32:64:128:256:512:1024", "host/win/safety_offsets_1x":"16:24:32:48:64:128:256", "host/wi...

Ah Ok. I do not have any buffer setting adjustment in my web interface, 1.3.4. But in the screenshot there's TouchConsole :wink: Just found out that there's "/ext/obank/4/ch/63" via json. Counting from 0 that's 64 channels at least at some point internally. http://motu.com/techsupport/technotes/fir...

according to the Ultralite AVB specs: 64 in/out @ 44.1 or 48kHz, 32 in/out 88.2 or 96kHz I thought it was limited to 24/24... If I remember correctly it is limited to 24 via USB (for windows/mac users as well?). 64 channels is USB/Hardware combined with AVB/Hardware (1.20+128 extended USB channel c...

How long does it work for you? The most I get out of my 8pre-ES is about 20 seconds (a rough guess) before it swaps to the next bank of channels, It "works" forever without problems (single crack when switching samplerate of course) here, because I'm practically using it as a mixer with web fronten...

Unfortunately version 1.3.2 is not available for the 8pre-ES, only the 828es even though they share the three most recent firmware versions available. It does work "successfully" ;) (for a certain time...) for most of us here. 1.3.2 or 1.3.4 (but the newest 2 versions) don't make a difference regar...

Over here the cheapest i210 based card is 35-40€. As long as the device is directly connected to the computer with no switch in between even a non-avb capable NIC should work. This certainly requires writing a trivial userspace AVB driver first. The hades-canyon NUCs seem to have i210 chips as well...