12.04 ams64 : cannot install festige

[falkTX]

lol, please read the text I put there... it's written for a reason
(or maybe you didn't understood it?)

anyway, replace 'VERSION' with your installed ubuntu/kxstudio version, which in this case I assume it's "precise".

after that, reload the source again (apt-get update, or whatever method you use), and 'wineasio' will be installable.

[slowpick]

In case it is useful info, the fst command works to load Absynth 5, CMFuzz, and other vsts,
and then if I launch a vst from festige, that fails, and when I close Festige,
it closes the apps that were running with fst.

[stanlea]

lol, please read the text I put there... it's written for a reason
(or maybe you didn't understood it?)

anyway, replace 'VERSION' with your installed ubuntu/kxstudio version, which in this case I assume it's "precise".

after that, reload the source again (apt-get update, or whatever method you use), and 'wineasio' will be installable.

I *did* replace VERSION with precise... (see my error message), but still it doesn't load.

[bassndrumboy20]

A dependency is missing (I though gtk2 and jack were enough, guess they are not).
Please run:

Code: Select all

ldd /usr/share/festige/fst/fst.exe.so

and post the output here.
That will be the final step to (finally) make festige work.

As requested!

Code: Select all

   linux-gate.so.1 =>  (0xf7740000)
   libgtk-x11-2.0.so.0 => /usr/lib/i386-linux-gnu/libgtk-x11-2.0.so.0 (0xf72a0000)
   libgdk-x11-2.0.so.0 => /usr/lib/i386-linux-gnu/libgdk-x11-2.0.so.0 (0xf71f1000)
   libatk-1.0.so.0 => /usr/lib/i386-linux-gnu/libatk-1.0.so.0 (0xf71d0000)
   libgobject-2.0.so.0 => /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 (0xf7181000)
   libglib-2.0.so.0 => /lib/i386-linux-gnu/libglib-2.0.so.0 (0xf7088000)
   libjack.so.0 => /usr/lib/i386-linux-gnu/libjack.so.0 (0xf7039000)
   libpthread.so.0 => /lib/i386-linux-gnu/libpthread.so.0 (0xf701e000)
   libX11.so.6 => /usr/lib/i386-linux-gnu/libX11.so.6 (0xf6ee9000)
   libwine.so.1 => /usr/lib/i386-linux-gnu/libwine.so.1 (0xf6da7000)
   libm.so.6 => /lib/i386-linux-gnu/libm.so.6 (0xf6d7b000)
   libc.so.6 => /lib/i386-linux-gnu/libc.so.6 (0xf6bd6000)
   libpangocairo-1.0.so.0 => /usr/lib/i386-linux-gnu/libpangocairo-1.0.so.0 (0xf6bc9000)
   libXfixes.so.3 => /usr/lib/i386-linux-gnu/libXfixes.so.3 (0xf6bc2000)
   libcairo.so.2 => /usr/lib/i386-linux-gnu/libcairo.so.2 (0xf6af7000)
   libgdk_pixbuf-2.0.so.0 => /usr/lib/i386-linux-gnu/libgdk_pixbuf-2.0.so.0 (0xf6ad6000)
   libgio-2.0.so.0 => /usr/lib/i386-linux-gnu/libgio-2.0.so.0 (0xf697e000)
   libpangoft2-1.0.so.0 => /usr/lib/i386-linux-gnu/libpangoft2-1.0.so.0 (0xf6952000)
   libpango-1.0.so.0 => /usr/lib/i386-linux-gnu/libpango-1.0.so.0 (0xf6907000)
   libfontconfig.so.1 => /usr/lib/i386-linux-gnu/libfontconfig.so.1 (0xf68d3000)
   libXext.so.6 => /usr/lib/i386-linux-gnu/libXext.so.6 (0xf68c1000)
   libXrender.so.1 => /usr/lib/i386-linux-gnu/libXrender.so.1 (0xf68b7000)
   libXinerama.so.1 => /usr/lib/i386-linux-gnu/libXinerama.so.1 (0xf68b3000)
   libXi.so.6 => /usr/lib/i386-linux-gnu/libXi.so.6 (0xf68a2000)
   libXrandr.so.2 => /usr/lib/i386-linux-gnu/libXrandr.so.2 (0xf6899000)
   libXcursor.so.1 => /usr/lib/i386-linux-gnu/libXcursor.so.1 (0xf688e000)
   libXcomposite.so.1 => /usr/lib/i386-linux-gnu/libXcomposite.so.1 (0xf688a000)
   libXdamage.so.1 => /usr/lib/i386-linux-gnu/libXdamage.so.1 (0xf6886000)
   libffi.so.6 => /usr/lib/i386-linux-gnu/libffi.so.6 (0xf687e000)
   libpcre.so.3 => /lib/i386-linux-gnu/libpcre.so.3 (0xf6842000)
   librt.so.1 => /lib/i386-linux-gnu/librt.so.1 (0xf6839000)
   libstdc++.so.6 => /usr/lib/i386-linux-gnu/libstdc++.so.6 (0xf6754000)
   libdl.so.2 => /lib/i386-linux-gnu/libdl.so.2 (0xf674f000)
   libgcc_s.so.1 => /lib/i386-linux-gnu/libgcc_s.so.1 (0xf6730000)
   /lib/ld-linux.so.2 (0xf7741000)
   libxcb.so.1 => /usr/lib/i386-linux-gnu/libxcb.so.1 (0xf670f000)
   libfreetype.so.6 => /usr/lib/i386-linux-gnu/libfreetype.so.6 (0xf6675000)
   libpixman-1.so.0 => /usr/lib/i386-linux-gnu/libpixman-1.so.0 (0xf65dd000)
   libpng12.so.0 => /lib/i386-linux-gnu/libpng12.so.0 (0xf65b3000)
   libxcb-shm.so.0 => /usr/lib/i386-linux-gnu/libxcb-shm.so.0 (0xf65ae000)
   libxcb-render.so.0 => /usr/lib/i386-linux-gnu/libxcb-render.so.0 (0xf65a4000)
   libz.so.1 => /lib/i386-linux-gnu/libz.so.1 (0xf658e000)
   libgmodule-2.0.so.0 => /usr/lib/i386-linux-gnu/libgmodule-2.0.so.0 (0xf6589000)
   libselinux.so.1 => /lib/i386-linux-gnu/libselinux.so.1 (0xf656a000)
   libresolv.so.2 => /lib/i386-linux-gnu/libresolv.so.2 (0xf6551000)
   libexpat.so.1 => /lib/i386-linux-gnu/libexpat.so.1 (0xf6527000)
   libXau.so.6 => /usr/lib/i386-linux-gnu/libXau.so.6 (0xf6523000)
   libXdmcp.so.6 => /usr/lib/i386-linux-gnu/libXdmcp.so.6 (0xf651c000)


[falkTX]

that is weird, you have all the libs needed.

please post the output of:

Code: Select all

wine /usr/share/festige/fst/fst.exe.so

[stanlea]

On my side, I still cannot add

Code: Select all

deb http://kxstudio.sourceforge.net/repo/precise free non-free

to my depos file

Anybody else concerned ?

[falkTX]

On my side, I still cannot add

Code: Select all

deb http://kxstudio.sourceforge.net/repo/precise free non-free

to my depos file

Anybody else concerned ?

it reads:

Code: Select all

deb http://kxstudio.sourceforge.net/repo/ VERSION free non-free

there's a space between repo/ and VERSION, so it will become:

Code: Select all

deb http://kxstudio.sourceforge.net/repo/ precise free non-free

This is rather useless if you just install 'kxstudio-repos', much easier to set-up that way.
Just follow step 1 & 2 described in here:
http://kxstudio.sourceforge.net/Documen ... tu:Upgrade

[stanlea]

none of this methods works this is quite strange, the meta non free is installed but I can't find wineasio in any repos

[falkTX]

none of this methods works this is quite strange, the meta non free is installed but I can't find wineasio in any repos

no problem, just grab it manually then.
32bit:
http://sourceforge.net/projects/kxstudi ... b/download
http://sourceforge.net/projects/kxstudi ... b/download
-------------------------------------------------------------------------------------
64bit:
http://sourceforge.net/projects/kxstudi ... b/download
http://sourceforge.net/projects/kxstudi ... b/download
http://sourceforge.net/projects/kxstudi ... b/download

install them in order on which I posted, either the 32bit links or the 64bit, but not both.

[stanlea]

Thank you, finally it worked (and I succeded to add manually the repos in list).

A last problem : tweaking wine/audio only shows me an "alsa" choice. How do register wineasio ?

[falkTX]

A last problem : tweaking wine/audio only shows me an "alsa" choice. How do register wineasio ?

wine only works in ALSA mode now (from v1.4 onwards), so you'll need some alsa2jack bridge to get audio on normal applications (wineasio apps will be just fine though).

to register wineasio, just run as normal user:

Code: Select all

regsvr32 wineasio.dll

winecfg won't show ASIO in any way, but it will still work.

[i2productions]

Thank you, finally it worked (and I succeded to add manually the repos in list).

The non-free repo is the only repo I've never been able to add via synaptic or otherwise. For some reason you HAVE to manually add it to the sources list.

[falkTX]

Thank you, finally it worked (and I succeded to add manually the repos in list).

The non-free repo is the only repo I've never been able to add via synaptic or otherwise. For some reason you HAVE to manually add it to the sources list.

Fixed in 12.04, even for linux mint.
I changed the ways repos are added, so *any* Ubuntu 12.04 based distro will *always* work with it.

[anko]

In case it is useful info, the fst command works to load Absynth 5, CMFuzz, and other vsts,
and then if I launch a vst from festige, that fails, and when I close Festige,
it closes the apps that were running with fst.

hi slowpick, i notice you mention Absynth 5 here... i have a registered Absynth 5 that i'd like to get running under linux/kxstudio, i've gotten it to install under wine, but when i run it i can't connect it to any audio outputs or midi inputs... can you give me any pointers on this?

thanks a bunch if you can!

[slowpick]

For the standalone, the file menu, Audio-midi Settings, Audio tab, choose asio, and wineasio for the driver, and in the midi tab, turn on your input and output ports. It auto-connects in the
qjackctl Audio tab. For the plugin, I use reaper, (if more plugins are to be used) and its preferences to set up the same things. (If you start the plugin with fst, you will have to manually connect
in the qjackctl Audio and midi tabs.) Thats all I do. Hope it works!

wine /home/user/.wine/drive_c/Program*Files/Native*Instruments/Absynth*5/Absynth*5.exe

fst /home/user/.wine/drive_c/Program*Files/Steinberg/VstPlugins/Absynth*5.dll